STARTECH C2-D46-UC2-CBL-KVM (01) PDF MANUAL

STARTECH C2-D46-UC2-CBL-KVM (01) PDF SUMMARY:

How do I select a PC Port?

Right-click the KVM Switching Software icon to bring up the Operation Menu. Select the desired PC Port. Select PC Port to switch to.

How do I define a hotkey sequence?

Right-click the KVM Switching Software icon to bring up the Operation Menu. Change the hotkey sequence to the desired keys. Select “OK”. Change the hotkey sequence to “Ctrl + Alt” if desired, or if no Scroll Lock key is available on the keyboard.

How do I start Autoscan?

Right-click the KVM Switching Software icon to bring up the Operation Menu. Select “Start Autoscan”. Select “OK”. Autoscan automatically switches between PC Ports.

How do I define the Autoscan interval?

Right-click the KVM Switching Software icon to bring up the Operation Menu. Select Settings. Beside “Autoscan Period” use the dropdown to select the interval. Select “OK”. Autoscan automatically switches between PC Ports at the defined rate.

How do I stop Autoscan?

Press any key on the Keyboard. Stops the Autoscan feature on the current PC Port.

How do I keep the KVM Switching Software icon in the Dock (macOS Only)?

Right-click the KVM Switching Software icon to bring up the Operation Menu. Select “Keep in Dock”. Select “OK”.

How do I set the KVM Switching Software to open at login (macOS Only)?

Right-click the KVM Switching Software icon to bring up the Operation Menu. Select “Open at Login”. Select “OK”. The KVM Switching Software will open after logging into the Computer.

How do I fix the audio port?

Right-click the KVM Switching Software icon to bring up the Operation Menu. Select Settings. Beside “Fix Audio to:” use the dropdown to select the desired computer. Select “OK”. Enabling this feature will bind the Mic/Speakers to one PC Port. The Audio will not switch PC Ports with the USB Devices or Video until the feature is disabled.