Free English SOURCE AUDIO C4 SYNTH (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SOURCE AUDIO C4 SYNTH (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How should I power the SOURCE AUDIO C4 SYNTH?
Power your SOURCE AUDIO C4 SYNTH with the included power supply. If you are using pedalboard power, be sure to use a regulated 9 Volt DC output that can source at least 150mA.
What are the functions of the Main Controls on the SOURCE AUDIO C4 SYNTH?
INPUT – Input Level Control.
MIX – Master mix between the dry signal and the synth voices.
CONTROL 1– Variable knob depending on preset.
CONTROL 2 – Variable knob depending on preset.
Toggle Switch (Circle, Triangle, Square) – Top Level Presets – #1, #2, #3
How do I activate Alt Controls on the SOURCE AUDIO C4 SYNTH?
Hold down the control button while turning a knob/toggle, or press the control button once to make ALT mode active. The LED blinks while ALT mode is active. After 5 seconds, the SOURCE AUDIO C4 SYNTH reverts to normal control mode.
What functions do the controls perform when the SOURCE AUDIO C4 SYNTH is in Alt Mode?
SENSE – Envelope Sensitivity Control.
VOL – Master Output Volume Level.
Toggle Switch (Circle, Triangle, Square) – Top Level Presets – #4, #5, #6
How do I connect the SOURCE AUDIO C4 SYNTH to the Neuro Desktop Editor?
Connect via USB. You can browse and download factory and community presets from the Neuro library. Design and experiment with your own sounds with the intuitive SOURCE AUDIO C4 SYNTH editing interface.
How do I connect the SOURCE AUDIO C4 SYNTH to the Neuro Mobile App?
Use the supplied cable from your iOS or Android device headphone jack to INPUT 2 on the pedal to access the Neuro world of presets and controls on-the-go.
How do I perform Input Level Calibration on the SOURCE AUDIO C4 SYNTH?
Use this to ensure your particular instrument levels are matched to the SOURCE AUDIO C4 SYNTH. Turn the INPUT knob while playing your instrument. Increase until you see the LED go from GREEN to blinking RED.
CLICK HERE TO DOWNLOAD SOURCE AUDIO C4 SYNTH (01) PDF DOCUMENT