CASIO 5605 (01) PDF Document

To configure the Home City, Time, and Date settings on your CASIO 5605, follow these steps:

1. In the Timekeeping Mode, hold down button A until the seconds start to flash, which indicates the setting screen.

2. Press button C to move the flashing in the sequence shown below to select the other settings: Seconds > DST > Hour > Minutes > Year > Month > Day.

3. Use buttons B and D to change the selected setting:

To reset the seconds to 00: Press D.

To toggle between Daylight Saving Time (ON) and Standard Time (OF): Press D.

To change the hour or minutes: Use D (+) and B (-).

To change the year: Use D (+) and B (-).

To change the month or day: Use D (+) and B (-).

4. Press button A twice to exit the setting screen.

To cycle between modes on the CASIO 5605, press button C. The modes cycle in the following order:

1. Timekeeping Mode

2. Moon/Tide Data Mode

3. Stopwatch Mode

4. Countdown Timer Mode

5. Alarm Mode

6. Hand Setting Mode

7. Dual Time Mode

The button operations for Timekeeping Mode on the CASIO 5605 are as follows:

Button A (hold for at least 1 second): Enters the Time, date setting screen.

Button A (press): Enters the Home Site Data Setting Screen.

Button C: Cycles between UTC differential, longitude, east longitude/west longitude, lunitidal interval hours, and lunitidal interval minutes.

Buttons D and B: Change the selected setting.

Button A: Exits setting screen.

In the Moon/Tide Data Mode on the CASIO 5605, the operations are:

Button A (press): Switches between TIDE and MOON screens.

Button D: Scrolls hour forward (when on the TIDE screen) or scrolls day forward (when on the MOON screen).

Button A (hold for at least 1 second): Enters the Date setting screen.

Button C: Selects year, month, or day.

Buttons D and B: Change selected setting.

Button A: Exits setting screen.

The Stopwatch Mode on the CASIO 5605 is operated as follows:

Start: Press D.

Stop: Press D.

Reset: Press A.

Split/Reset: Press A.

To operate the Countdown Timer Mode on the CASIO 5605:

Start/Stop: Press D.

Reset: Press A.

To configure the timer settings:

1. Hold Button A (at least 1 second while start time is displayed) to enter the start time setting screen.

2. Press Button C to select hours, minutes, or auto repeat (on/off).

3. Use Buttons D and B to change the selected setting.

4. Press Button D to toggle Auto-repeat on/off.

5. Press Button A to exit the setting screen.

For the Alarm Mode on the CASIO 5605:

Button A: Selects alarm on, snooze on, or alarm off.

Button D: Scrolls through alarm screens.

To set an alarm:

1. Hold Button A (at least 1 second) to enter the Alarm time setting screen.

2. Press Button C to select hour, minute, month, or day.

3. Use Buttons D and B to change the selected setting.

4. Press Button A to exit the setting screen.

To configure Dual Time on the CASIO 5605:

1. Hold Button A (at least 1 second) to enter the Dual Time setting screen.

2. Press Button C to select DST, hour, or minute.

3. Press Button D to toggle DST setting.

4. Use Buttons D and B to change the selected setting.

5. Press Button A to exit the setting screen.

To adjust the analog hands on the CASIO 5605:

1. Enter Hand Setting Mode.

2. Hold Button A (at least 1 second) to enter the Analog hand setting screen.

3. Press Button D to advance the minute hand by 20 seconds.

4. Hold Button D and press Button B to lock high-speed hand movement.

5. Press Button A to exit the setting screen.

Press Button B to illuminate the face of the CASIO 5605.

Accuracy at normal temperature: ±30 seconds a month

Digital Timekeeping: Hour, minutes, seconds, a.m./p.m. (P), month, day, day of the week

Time format: 12-hour and 24-hour

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Other: Daylight Saving Time (summer time)/Standard Time; Home Site data settings (UTC differential, longitude, lunitidal interval)

Analog Timekeeping: Hour, minutes (hand moves every 20 seconds)

Moon/Tide Data: Tide level for a specified date and time; Moon phase indicator and Moon age for a specified date

Stopwatch:

Measuring unit: 1/100 second

Measuring capacity: 23:59’59.99″

Measuring modes: Elapsed time, split time, two finishes

Countdown Timer:

Measuring unit: 1 second

Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)

Time up alert duration: 10 seconds

Other: Auto-repeat timing

Alarms: 3 Multi-function alarms (1 with snooze feature); Hourly Time Signal. Alarm type: Daily alarm, Date alarm, 1-month alarm, Monthly alarm. Alert duration: 10 seconds

Dual Time: Hour, minutes, seconds, a.m./p.m. (P)

Other: Daylight Saving Time (summer time)/Standard Time

Illumination: LED (light-emitting diode); Auto Light Switch; selectable illumination duration (approximately 1.5 seconds or 3 seconds)

Other: Button operation tone on/off

Battery: One lithium battery (Type: CR1220)

Approximately 3 years on type CR1220 (assuming alarm operation 10 sec./day and one illumination operation 1.5 sec./day)