SONY WH-H900N (01) PDF MANUAL

Connect the supplied micro-USB cable to the charging port on the left earcup (L).

Connect the other end of the USB cable to a computer or other USB power source.

The indicator light turns red during charging.

A full charge takes approximately 6 hours.

Connect the supplied headphone cable to the headphone jack INPUT on the left earcup (L).

Connect the other end of the cable to the headphone jack of your music player or other device.

To turn the headphones ON, press and hold the Power button (located on the left earcup) until the indicator light flashes.

To turn the headphones OFF, press and hold the Power button until the indicator light turns off.

With the headphones turned off, press and hold the Power button until the indicator starts flashing blue rapidly. This puts the headphones in pairing mode.

On your Android or iPhone device, turn on Bluetooth.

Search for available Bluetooth devices and select “WH-H900N (h.ear)” from the list.

Once connected, the indicator light on the headphones will turn solid blue.

Use the touch sensor panel on the right earcup (R):

Play/Pause: Double-tap the center.

Next track: Swipe forward.

Previous track: Swipe backward.

Volume up: Swipe up.

Volume down: Swipe down.

Use the touch sensor panel on the right earcup (R):

Answer an incoming call: Double-tap the center.

End a call: Double-tap the center.

Press and hold the center of the touch sensor panel on the right earcup (R).

Press the NC/AMBIENT button (located on the left earcup).

Each press cycles through the modes: Noise Cancelling ON -> Ambient Sound ON -> Noise Cancelling OFF.

You can also manage these settings using the Sony Headphones Connect app.

Ensure NFC is enabled on your Android smartphone.

Unlock your phone’s screen.

Touch the N-Mark on the left earcup (L) of the headphones to the NFC detection area on your smartphone.

Follow any on-screen prompts on your phone to complete the connection.

To disconnect, touch the N-Marks together again.

Yes, you can use the Sony Headphones Connect app for additional features and settings. You can find it by searching “Sony Headphones Connect” or using the provided QR code.

You can access the online help guide for detailed information by visiting the URL: http://rd1.sony.net/help/mdr/whh900n/h_zz/ or by scanning the QR code shown in the ‘i’ section of the manual.