SONY PS4 CUH-2208B (01) PDF Document

To connect your SONY PS4 CUH-2208B to your TV, please follow these steps. Ensure you make all connections before plugging the AC power cord into an electricity supply.

1. Connect one end of the HDMI cable to the HDMI OUT port on the rear of the SONY PS4 CUH-2208B system.

2. Connect the other end of the HDMI cable to the HDMI input port on your TV.

3. Connect the AC power cord to the AC IN connector on the rear of the SONY PS4 CUH-2208B system.

4. Plug the other end of the AC power cord into an electricity supply.

Yes, you can transfer saved data from your current PlayStation®4 system to your new SONY PS4 CUH-2208B system. It is recommended to complete the data transfer during the initial set up process for your new system. If you do it later, any saved data on the new system will be lost.

There are two ways to connect your SONY PS4 CUH-2208B to the internet:

Wired Connection: For a more stable network connection, it is recommended to use a LAN cable (sold separately). Connect the LAN cable from the LAN port on the rear of the console to your router.

Wireless Connection: If you prefer to use a wireless connection (Wi-Fi), do not connect a LAN cable. You will be able to set up the Wi-Fi connection during the system’s initial setup.

1. Turn on your TV and set the input to HDMI.

2. Turn on your SONY PS4 CUH-2208B system by pressing the (power) button. The power indicator will blink blue, and then turn white.

If your TV does not display a picture when the power indicator on your SONY PS4 CUH-2208B turns white, you should restart your system. Press the (power) button for at least 7 seconds to turn off your system, and then turn it on again.

Connect your DUALSHOCK®4 wireless controller to your SONY PS4 CUH-2208B system using the USB cable, and then press the (PS) button. Your controller will then pair with your system and turn on.

Important points to remember:

• You’ll need to pair a controller when you use it for the first time and when you use your controller on another PS4™ system.

• If you want to use two or more controllers, you must pair each controller.

• After you’ve paired your controller, you can disconnect the USB cable and use your controller wirelessly.

It’s possible to use up to four controllers at the same time with your SONY PS4 CUH-2208B. When you press the (PS) button, the light bar glows in your assigned colour. The first controller to connect is blue, with subsequent controllers glowing red, green, and pink.

During the initial setup of your SONY PS4 CUH-2208B, you should follow the on-screen instructions to set up an Internet connection, set the date and time, and configure other settings. Once these are complete, select [Start Now] from the setup screen. After you set up your Internet connection, a system software update may automatically download. Future updates will improve performance and add new features.

To later change any settings that you skipped on your SONY PS4 CUH-2208B, select (Settings) from the function screen.

On your SONY PS4 CUH-2208B, it is recommended that parents/guardians create a separate account for each child that will use the system, with an accurate date of birth for each, to help provide an age-appropriate experience. Parents and guardians can also use a range of parental controls to tailor the child’s experience, including preventing or limiting expenditure on PlayStation™ Store and controlling their opportunities to message and chat, to exchange user-created content – such as images and videos – and to use the in-built Internet Browser.

You can restrict the use of games that have age limitations by setting the parental control level on your SONY PS4 CUH-2208B according to the following table for the Russian Federation.

You can restrict the use of games that have age limitations by setting the parental control level on your SONY PS4 CUH-2208B according to the following table for Europe, Africa and India.

You can navigate three main areas on your SONY PS4 CUH-2208B:

Function screen: Press the up button to access PS4™ system features, including notifications, your Friends, and settings.

Home screen (Content area): This is where you access your games and other content.

Content info screen: From the home screen, press the down button to display the latest information about the selected content.

If you have a game disc, insert it into the console. Then, select the game from the content area to start playing. If you do not have a game disc, you can check the PlayStation™ Store for downloadable games.

To return to the home screen without ending a game on your SONY PS4 CUH-2208B, press the (PS) button. To resume playing the game, select it from the content area.

To end a game on your SONY PS4 CUH-2208B, press and hold the (PS) button, and then select [Close Application] from the quick menu that appears.

To eject a disc from your SONY PS4 CUH-2208B, press the (eject) button located on the front of the console.

For in-game voice chat on your SONY PS4 CUH-2208B, plug the mono headset into your controller’s stereo headset jack.

You can charge your controller with your SONY PS4 CUH-2208B system either on or in rest mode. Connect your controller to the system using a USB cable.

To charge your controller while your SONY PS4 CUH-2208B system is in rest mode, select an option other than [Off] in (Settings) > [Power Saving Settings] > [Set Features Available in Rest Mode] > [Supply Power to USB Ports].

To share your gameplay online from your SONY PS4 CUH-2208B, press the SHARE button on your controller and choose one of the following options:

Upload a screenshot: Capture a screenshot of your gameplay and upload it to your social networks, or use (Messages) to send it to Friends.

Upload a video clip: Your SONY PS4 CUH-2208B system continuously records the last 15 minutes of gameplay. You can upload a video clip of the recorded gameplay to your social networks.

Broadcast your gameplay live: Broadcast your gameplay to a live streaming service so others can watch your adventures.

To view gameplay shared by others on your SONY PS4 CUH-2208B, use (Live from PlayStation) to view broadcasts, video clips, or screenshots shared by other players.

On your SONY PS4 CUH-2208B, you can use (Share Play) to share the game screen with another player and play the same game together.

You should disconnect the AC power cord from the electricity supply only when the power indicator on your SONY PS4 CUH-2208B is off. If you disconnect it while the power indicator is lit or blinking, data might be lost or become corrupted, and you might damage your system.

To put your SONY PS4 CUH-2208B in rest mode, select (Power) from the function screen, and then select [Power Options] > [Enter Rest Mode]. The power indicator will blink white, and then turn orange. When your system is in rest mode, it keeps operating, but at a lower power consumption. You can configure your system to download files and charge a controller while it’s in rest mode. To exit rest mode, press the (PS) button.

To turn off your SONY PS4 CUH-2208B completely, select (Power) from the function screen, and then select [Turn Off PS4]. The power indicator blinks white, and then turns off.

The power indicator on your SONY PS4 CUH-2208B displays the system’s status:

White: The system is on.

Orange: The system is in rest mode.

Off: The system is off.