SONY K-65XR80M2 (01) PDF Document

The approximate dimensions and weight of the SONY K-65XR80M2 with the stand attached in the outer position are detailed in the table below.

The approximate dimensions and weight of the SONY K-65XR80M2 without the stand are detailed in the table below.

The remote control shape, layout, availability, and function of buttons may vary. Here are the main functions:

Group 1:

(Power): Turns the TV on or off.

TV: Display TV channel list or switch to input.

(Quick Settings): Display Quick Settings.

(Input select): Display and select the input source, etc.

MENU (Control menu): Display the Control menu.

Group 2:

Directional buttons (Up/Down/Left/Right) / OK: On-screen menu navigation and selection.

(Back): Return to the previous screen.

(Home): Display the TV Home Menu.

(Google Assistant / Microphone): Use Google Assistant*¹*² or voice search*².

Group 3:

+/- (Volume): Adjust the volume.

(Mute)*³: Mute the sound. Press and hold to turn on or off the Accessibility shortcut.

CH +/- (Channel): Select the channel.

(Dashboard): Display Dashboard.

(Guide): Display the digital programme guide of TV or TV box*⁴.

Group 4:

App buttons: Provide direct access to various streaming services.

*1 Only for limited region/country/model/language.

*2 Google Assistant or voice search requires an Internet connection.

*3 Accessibility shortcut is available by pressing and holding (Mute).

*4 [TV box setup] setting is required.

For product protection and safety reasons, it is strongly recommended that installation of your TV on the wall be performed by qualified professionals. Do not attempt to install it yourself.

Safety Precautions:

Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight.

The screws for installing the Wall-Mount Bracket to the TV are not supplied.

If you detach the Table-Top Stand, be sure to store the unused screws and Table-Top Stand in a safe place. Keep the screws away from children.

Read the supplied safety documentation for additional safety information.

Preparation Steps:

1. Remove the stand covers and terminal covers.

2. Remove the screws from the rear of the TV.

3. Attach the Wall-Mount Bracket (not supplied) using the appropriate screws (not supplied).

Note: If using an electric screwdriver, set the torque at approximately 1.5 N-m (15 kgf-cm).

Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV with the panel facing down.

For general troubleshooting issues like a black screen, no sound, a frozen picture, the TV not responding, or a lost network connection, follow these steps:

1. Restart your TV by pressing the power button on the remote control for about five seconds. The TV will restart. If the TV does not recover, try unplugging the AC power cord (mains lead), then press the power button on the TV and release it. Wait for two minutes, and plug in the AC power cord again.

Or, press the power button on the TV for about 40 seconds until the TV turns off.

2. Refer to the Help menu. Press (Quick Settings) on the remote control and select [Help]. If [Help] does not exist, select [Edit] and add [Help].

3. Connect your TV to the Internet and perform a software update. Sony recommends keeping your TV software updated for new features and performance improvements.

When you plug in the SONY K-65XR80M2, it may not be able to turn on for a while, even if you press the power button on the remote control or the TV. It takes time to initialize the system. Wait for about one minute, then operate it again.

If the remote control does not function, try replacing the batteries.

If the parental lock password has been forgotten, enter 9999 for the PIN and then enter the new PIN.

If the whole image or part of the image remains still, the screen brightness will be gradually reduced to prevent image retention. This is not a malfunction of the TV.

If the same image is displayed repeatedly or for long periods of time, image retention may occur. This happens when a faint outline of the static image remains visible. To reduce image retention, it is recommended that you turn off the TV normally by pressing the power button on the remote control or the TV.

Note: Images that include logos and bright colours (including white) can easily cause image retention. Avoid displaying these types of images for long periods of time.

The Panel refresh will not be completed if one of the following conditions occurs during the process:

1. The TV is turned on.

2. The AC power cord (mains lead) is unplugged.

3. The room temperature falls outside of the range between 10 °C and 40 °C.

Please avoid the above three conditions during the Panel refresh process.

*1 Specified standby power is reached after the TV finishes necessary internal processes.

*2 Standby power consumption will increase when your TV is connected to the network.