Free English SONY ELF-SR2 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SONY ELF-SR2 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the recommended viewing environment conditions for the SONY ELF-SR2?
The recommended viewing environment conditions for the SONY ELF-SR2 are:
- Room illuminance: Approx. 100 to 1,000 lx and 100 lx and over for the surface of the face
- Viewing distance: 50 cm to 70 cm
- Viewing angle (horizontal): ±25°
- Viewing angle (vertical): –40°/+20°
How do I connect the SONY ELF-SR2 to a PC using the supplied HDMI cable?
To connect the SONY ELF-SR2 to a PC using the supplied HDMI cable (Connection Method ):
Connect to a PC with the HDMI cable (supplied) and USB cable (supplied).
How do I connect the SONY ELF-SR2 to a PC using a DisplayPort cable?
To connect the SONY ELF-SR2 to a PC using a DisplayPort cable (Connection Method ):
Connect to a PC with a DisplayPort cable (sold separately) and the USB cable (supplied). In this case, use a DisplayPort cable supporting DisplayPort 1.2.
How do I connect the SONY ELF-SR2 to a PC using a USB Type-C to USB Type-C cable?
To connect the SONY ELF-SR2 to a PC using a USB Type-C to USB Type-C cable (Connection Method ):
Connect to a PC with a USB Type-C – USB Type-C cable (sold separately). In this case, use a USB Type-C – USB Type-C cable supporting DP Alt mode and USB 2.0.
How do I connect the mains adaptor to the SONY ELF-SR2?
Insert the DC connector of the supplied mains adaptor straight into the 19.5 V (DC input) connector of the SONY ELF-SR2 to connect them.
How do I install the SDK (Software Development Kit) for the SONY ELF-SR2 on a PC?
For details on how to install the SDK (Software Development Kit) for the SONY ELF-SR2, follow the instructions provided in the PDF.
How do I update the firmware on the SONY ELF-SR2?
To update the firmware on the SONY ELF-SR2:
1. Connect the USB flash drive containing the update software. Please use a USB memory formatted with FAT32. After several minutes, “Update?” is displayed.
2. Press the + button to perform the update. To cancel the update, press the MENU button. During the update, the screen turns black and the indicator flashes in white. The update is completed in about 15 minutes.
How do I turn on the SONY ELF-SR2 display?
To turn on the SONY ELF-SR2 display:
1. Connect the mains lead to the mains socket.
2. Press the (Power) switch to turn on the display. The indicator lights in white when the display is turned on.
What should I do if there is no screen image or audio on the SONY ELF-SR2?
If there is no screen image or audio on the SONY ELF-SR2:
When the indicator flashes in orange or lights in red, unplug the mains lead and wait until the indicator stops flashing. Then, plug the mains lead again and turn on the display with the (Power) switch. If the indicator is still flashing, check how many times the indicator flashes and consult qualified Sony service personnel.
What should I check if the image on the SONY ELF-SR2 is not displayed correctly?
Check if your environment is suitable for viewing the SONY ELF-SR2 display (page 9).
What should I check if the screen on the SONY ELF-SR2 becomes dark or no image is displayed after a certain period passed?
The “Auto shut-off” setting is enabled. Check the “Auto shut-off” setting (page 13).
What should I do if “No signal” is displayed on the SONY ELF-SR2?
No signal is input to the SONY ELF-SR2 display.
What should I do if “Unsupported signal” is displayed on the SONY ELF-SR2?
Some signals may not be supported on the SONY ELF-SR2 display depending on the input signal. Check the supported signal of your PC.
What are the menu items available on the SONY ELF-SR2?
The menu items available on the SONY ELF-SR2 display are:
| Menu | Setting |
|---|---|
| Input Select | Selects the video input source.
|
| Brightness | Adjusts brightness. |
| Contrast | Adjusts contrast. |
| Language | You can select the menu or message language.
|
| Auto shut-off | The display enters into standby mode automatically after a certain period of no signal input.
|
| Power Saving | Select the power saving mode.
|
| Information | Displays information of the display.
|
How do I switch between 3D and 2D display on the SONY ELF-SR2?
Press the Fn button to switch between 3D and 2D display on the SONY ELF-SR2.
The display setting functions are:
| Display setting | Function |
|---|---|
| 3D | Displays in normal 3D. |
| 3D-2D | Displays in 2D for image shooting or to make it easier for multiple viewers to view. |
| 2D | Displays in normal 2D. |
Note: When “Power Saving” is set to “On” or when using the display with default settings, you cannot switch to the 3D mode by pressing the Fn button. To switch to the 3D mode, set “Power Saving” to “Off” in the menu.