SONOFF M5-86 (01) PDF MANUAL

To avoid electric shocks, please consult the dealer or a qualified professional for help when installing and repairing.

Please install and maintain the device by a professional electrician.

To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on.

Please do not touch the switch during use.

Follow the light fixture wiring instructions:

Connect the Live wire to the L in terminal.

Connect the output Live wire(s) to the L out terminal(s).

Connect the Neutral wire to the N terminal.

Make sure all wires are connected correctly.

Note: An N wire is required for the M5.

S1/S2 can be connected with the rocker switch as the external switches, used to control the connected light.

Download the eWeLink App by scanning the QR code provided in the guide, or search for it on the Google Play Store or Apple App Store.

After powering on, the device will automatically enter the pairing mode during the first use. The Wi-Fi LED indicator will change in a cycle of two short flashes and one long flash, then release.

The device will exit the pairing mode if it’s not paired within 3 minutes.

If you need to enter pairing mode again, long press any pairing button for about 5 seconds until the Wi-Fi LED indicator changes in a cycle of two short flashes and one long flash, then release.

You can pair the device using Matter-compatible apps such as Apple Home, Google Home, Alexa App, or SmartThings App.

Use a Matter-compatible app (like Apple Home, Google Home, Alexa, SmartThings) to scan the Matter QR code located on the device itself or on the Quick Guide to add the device.

Method 1: Scan the QR code on the device or the Quick Guide using a Matter-compatible app to obtain the numeric pairing code.

Method 2: Manually enter the numeric pairing code (found on the device or Quick Guide) into your Matter-compatible app.

You can find the user manual by scanning the QR code in the guide or by visiting https://sonoff.tech/usermanuals.

Mode	Frequency Range	Output Power
WiFi	2412-2472MHz	20dBm
BLE	2402-2480MHz	10dBm

Under normal use conditions, this equipment should be kept at a separation distance of at least 20 cm between the antenna and the body of the user.

This symbol indicates that this product shall not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use designated return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.