FREE ENGLISH SONOFF B05 (01) PDF USER GUIDE
FREE ENGLISH SONOFF B05 (01) PDF USER MANUAL
FREE ENGLISH SONOFF B05 (01) PDF OWNER GUIDE
FREE ENGLISH SONOFF B05 (01) PDF OWNER MANUAL
FREE ENGLISH SONOFF B05 (01) PDF REFERENCE GUIDE
FREE ENGLISH SONOFF B05 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH SONOFF B05 (01) PDF REFERENCE MANUAL
FREE ENGLISH SONOFF B05 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH SONOFF B05 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD SONOFF B05 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What should I do before installing the device?
To avoid electric shock, please turn off the power before installing the device.
Which app should I download to control the device?
Download the eWeLink App.
What happens when I power on the device for the first time?
After powering on, the device will enter the Bluetooth Pairing mode during the first use. The device enters the “change from bright to dim and cycle the mode”.
What happens if the device is not paired within 3 minutes?
The device will exit the Bluetooth Pairing mode if not paired within 3 minutes.
How do I re-enter Bluetooth pairing mode if it exits?
If you want to enter Bluetooth pairing mode again, press the manual switch three times repeatedly at an interval of every 1 second (Off-ON-Off-ON-Off-ON). The “change from bright to dim and cycle the mode” indicates the light enters Bluetooth pairing mode.
How do I add the device in the eWeLink App?
Tap “+” and select “Add Device”, then operate following the prompt on the App.
What are the FCC conditions for operation?
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
What could void my authority to operate the equipment according to FCC rules?
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
What should I do if the device causes interference with radio or television reception?
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
What are the FCC requirements for radiation exposure and installation distance?
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
How should I dispose of this product?
This product is waste electrical and electronic equipment (WEEE) and should not be mixed with unsorted household waste. You should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.
What is the recommended separation distance between the antenna and the user’s body during normal use?
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
What are the EU operating frequency ranges and output power for this device?
The EU operating frequency ranges and output power are as follows:
EU Operating Frequency Range:
BLE: 2402-2480 MHz
Wi-Fi: 802.11 b/g/n20 2412-2472 MHz
EU Output Power:
BLE ≤ 10dBm
Wi-Fi 2.4G ≤ 20dBm
Can this device be used with emergency exits?
This device is not intended for use with emergency exits.
How should this lamp be controlled?
Only use the control provided with or specified by these instructions to control this lamp.
Will this lamp work with a standard dimmer or dimming control?
This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
Is this lamp suitable for use in dusty or moist environments?
Lamp not suitable for use under dust and moisture.
CLICK HERE TO DOWNLOAD SONOFF B05 (01) PDF MANUAL