Free English SMARTGEN SGUE485 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SMARTGEN SGUE485 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the primary function of the SMARTGEN SGUE485 Communication Interface Conversion Module?
The SMARTGEN SGUE485 Communication Interface Conversion Module converts the communication interface from USB (SmartGen special) to isolated standard RS485. The module integrates an RS485 interface chip which enables it to connect to an RS-485 network.
What are the product features of the SMARTGEN SGUE485?
The product features of the SMARTGEN SGUE485 include:
The RS485 network can connect to a maximum of 32 nodes.
Isolation Voltage can reach up to DC1000V.
It supports 35mm DIN-Rail Mounting.
It has a modular design with pluggable terminals, compact structure, and is easy to installation.
What are the technical parameters for the SMARTGEN SGUE485?
The technical parameters for the SMARTGEN SGUE485 are detailed in the following table:
| Item | Content |
|---|---|
| Operation Voltage | Controller USB port (5.0 V) continuous power supply |
| RS485 Port | Baud Rate: 9600bps |
| Stop Bit: 1bit | |
| Parity Bit: none | |
| Case Dimension | 89.7*35.6*60.7mm(L*W*H) |
| Working Condition | Temperature: (-25~+70)°C Relative Humidity: (20~93)% |
| Storage Condition | Temperature: (-25~+70)°C |
| Weight | 0.072kg |
How are the terminals of the SMARTGEN SGUE485 described?
The terminals description for the SMARTGEN SGUE485 is as follows:
| Terminal | Function | Cable Size | Remark |
|---|---|---|---|
| 1. | COM | 0.5mm² | Communicate with host controller’s baud rate: 9600bps. When communication is normal, RS485 indicator flashes. |
| 2. | B(-) | ||
| 3. | A(+) | ||
| USB | Communication and power supply | USB Type B | The USB port, communicate with controller, is used for power supply and data changing between module and controller. POWER indicator is normally light and USB indicator flashes. |
What is the required baud rate for the RS485 communication with the host controller using the SMARTGEN SGUE485?
The required baud rate for communication with the host controller’s RS485 port on the SMARTGEN SGUE485 is 9600bps.
What does the flashing RS485 indicator on the SMARTGEN SGUE485 signify?
When communication is normal between the SMARTGEN SGUE485 and the host controller, the RS485 indicator flashes.
What is the function of the USB port on the SMARTGEN SGUE485 module?
The USB port on the SMARTGEN SGUE485 module is used for communication with the controller, and it provides both power supply and data changing between the module and the controller. The POWER indicator is normally light, and the USB indicator flashes when this port is active.
What should be done regarding the USB indicator status on the SMARTGEN SGUE485 module before it communicates with a controller?
Please make sure the USB indicator is under flash status before the SMARTGEN SGUE485 module communicates with the controller. If the USB indicator is not flashing, the SMARTGEN SGUE485 needs to be powered again.
What must be configured for each controller before networking with the SMARTGEN SGUE485 module?
Please set each controller’s communication address to be different from each other before networking when using the SMARTGEN SGUE485 module.
What are the dimensions of the SMARTGEN SGUE485 module?
The dimensions of the SMARTGEN SGUE485 module are 89.7mm (Length) by 35.6mm (Width) by 60.7mm (Height).
CLICK HERE TO DOWNLOAD SMARTGEN SGUE485 (01) PDF DOCUMENT