SINGER 509 (01) PDF Document

Free English SINGER 509 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD SINGER 509 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

What parts are included in the Arm Top Cover assembly for the SINGER 509?

The following parts are listed for the Arm Top Cover assembly for the SINGER 509 model:

Ref. No.	Part No.	Description
1	103902-451	Arm Top Cover (Colour—Spec. No. 3537)
1	103902-452	Arm Top Cover (Colour—Spec. No. 3152)
2	114061-851	Arm Top Cover Screw (left)
3	103903-451	Arm Top Cover 103902-451 with 103594, 103912, 139893-452, 153772, 153867-453, 153868, 153888-451 and two 139893-451
3	103903-452	Arm Top Cover 103902-452 with 103594, 103912, 139893-452, 153772, 153867-453, 153868, 153888-451 and two 139893-451
4	153866	Arm Top Cover Thread Guide and Bobbin Winder Tension Bracket Support Screw Stud (Finish—Spec. No. 1029)
5	45847	Bobbin Winder Tension Disc Spring
6	45915	Bobbin Winder Tension Disc
7	153947	Arm Top Cover Thread Guide and Bobbin Winder Tension Bracket (Finish—Spec. No. 1055)
8	153865-452	Arm Top Cover Thread Guide and Bobbin Winder Tension Bracket Support (Colour—Spec. No. 3537)
9	14494	Arm Top Cover Thread Guide and Bobbin Winder Tension Bracket Support Retaining Ring
10	153888-451	Arm Top Cover Thread Guide and Bobbin Winder Tension Bracket complete, Nos. 14494, 45847, 45915, 153865-452, 153866 and 153947
11	172007	Arm Spool Pin (packed with Attachments)
12	319914	Arm Spool Pin Washer (packed with Attachments)
13	153867-453	Bobbin Winder Actuating Dial (Colour—Spec. No. 3537)
14	139893-452	Bobbin Winder Stop Screw (Finish—Spec. No. 1052)
15	153772	Bobbin Winder Stop (Finish—Spec. No. 1053)
16	139958-451	Arm Top Cover Screw (right) (Finish—Spec. No. 1051)
17	153924	Arm Top Cover Mounting Bracket Locating Pin
18	141959	Arm Top Cover Mounting Bracket Screw
19	153533	Arm Top Cover Mounting Bracket (Finish—Spec. No. 1019)
20	153868	Bobbin Winder Actuating Dial Backing Plate
21	103912	Bobbin Winder Actuating Dial Backing Plate Retaining Ring
22	103594	Bobbin Winder with 33730-701, 153771 and 173770-011
23	33730-701	Bobbin Winder Friction Ring
24	173770-011	Bobbin Winder Pulley
25	153771	Bobbin Winder Spring
26	139893-451	Bobbin Winder Mounting Screw (Finish—Spec. No. 1019)
27	155805	Control Panel Fastener
28	103761	Control Panel Fastener

What Face Plate, Side Cover, and End Cover parts fit the SINGER 509?

The following face plate, side cover, and end cover parts are compatible with the SINGER 509:

Ref. No.	Part No.	Description
29	116165-452	Face Plate (Colour—Spec. No. 3537)
30	114297-451	Face Plate Screw (Finish—Spec. No. 1040)
31	103911-451	Control Panel (Colour—Spec. No. 3508) with two 103761
32	114152-819	Arm Side Cover Screw
33	153414-451	Arm Side Cover (Colour—Spec. No. 3540)
34	51045-451	Machine Hinge Connection Set Screw (Finish—Spec. No. 1003)
35	90374	Arm End Cover Plate Fixing Stud Retaining Clip
36	310808-452	Arm End Cover Plate (Colour—Spec. No. 3540)
37	103763-029	Arm End Cover Plate 310808-452 with 102940-001 (240 volts) for Great Britain
37	103763-002	Arm End Cover Plate 310808-451 with 102940-002 (240 volts) for Australia
37	103763-031	Arm End Cover Plate 310808-452 with 102940-003 (220 volts) for Scandinavia
37	103763-032	Arm End Cover Plate 310808-452 with 102940-004 (127 and 220 volts) for Austria, France and Germany
37	103763-034	Arm End Cover Plate 310808-452 with 102940-007 (220 volts) for Austria, France and Germany
37	103763-035	Arm End Cover Plate 310808-452 with 102940-014 (190-210 volts) for Europe/Standard (except Austria, France, Germany and Scandinavia), Commonwealth, New Zealand and South Africa
37	103763-036	Arm End Cover Plate 310808-452 with 102940-015 (210-230 volts) for Europe/Standard (except Austria, France, Germany and Scandinavia), Commonwealth, New Zealand and South Africa
37	103763-037	Arm End Cover Plate 310808-452 with 102940-016 (230-250 volts) for Europe/Standard (except Austria, France, Germany and Scandinavia), Commonwealth, New Zealand, South Africa, Cyprus and Israel
37	103763-042	Arm End Cover Plate 310808-452 with 102940-026 (220 volts) for Switzerland
37	103763-043	Arm End Cover Plate 310808-452 with 102940-023 (all voltages) (light only) for Europe/Standard, Cyprus, France, Great Britain, Israel, New Zealand, Scandinavia and Switzerland
37	103763-045	Arm End Cover Plate 310808-452 with 102940-025 (220 volts) (light only) for Austria and Germany
38	103874	Arm End Cover Plate Fixing Stud (Finish—Spec. No. 1021)

What Bed and Leg components are used on the SINGER 509?

The bed and leg components for the SINGER 509 include:

Ref. No.	Part No.	Description
40	114139-851	Arm End Cover Plate Screw
41	103432-452	Bed Grommet (Colour—Spec. No. 3537)
42	103526	Machine Base Idler Pulley
43	103515-451	Machine Base Idler Pulley Fixing Screw (Finish—Spec. No. 1019)
44	113170-833	Bed Cover Plate (bottom) Screw Thumb Nut
45	8879-702	Bed Cover Plate (bottom) Screw Thumb Nut Washer
46	51361-451	Bed Cover Plate (bottom) Screw (Finish—Spec. No. 1050)
47	103900	Bed Cover Plate (bottom)
103618-452	103618-452	Arm and Bed (Colour—Spec. No. 3540) with 96396, 103308, 114234-451, 153360, 153383, 153840, 511024, 354085-451 and two 51045-451 (Not Illustrated)

What are the Presser Bar and Needle Bar parts for the SINGER 509?

The following parts are associated with the presser bar and needle bar mechanism for the SINGER 509:

Ref. No.	Part No.	Description
1	141142-805	Presser Bar Pressure Regulating Knob Screw
2	155899-452	Presser Bar Pressure Regulating Knob (Colour—Spec. No. 3537)
3	114115-819	Presser Bar Pressure Regulating Knob Bracket Screw
4	114186-451	Thread Take-up Lever Link Hinge Stud Set Screw (Finish—Spec. No. 1003)
5	153970	Presser Bar Pressure Regulating Knob Bracket (Finish—Spec. No. 1019)
6	153914-453	Presser Bar Pressure Regulating Knob (Colour—Spec. No. 3537) 155899-452 with 141142-805 and 153970
7	153969	Presser Bar Pressure Regulating Knob Follower
8	103283	Presser Bar Pressure Regulating Knob Follower Washer
9	103281	Presser Bar Spring
10	453-832	Presser Bar Guide Bracket Set Screw
11	170065-001	Presser Bar Guide Bracket with 453-832
12	85-805	Presser Bar Lifter Hinge Screw
13	310708	Presser Bar Lifter (Finish—Spec. No. 1051)
14	179591	Presser Bar Bushing
15	102810	Presser Bar
16	153267	Presser Foot Plate for 509 Machine
18	155964	Presser Foot Shank
19	354135-451	Presser Foot Thumb Screw (Finish—Spec. No. 1091)
20	51045-451	Presser Bar Bushing Set Screw (Finish—Spec. No. 1003)
21	103942	Tension Releasing Lever with 12329
22	114286-451	Tension Releasing Lever Hinge Screw (Finish—Spec. No. 1019)
23	12329	Tension Releasing Lever Spring
24	155727	Tension Thread Guide
25	179602	Slack Thread Regulator and Tension Thread Guide
26	114310-451	Tension Stud Set Screw
27	379505-452	Slack Thread Regulator and Tension Thread Guide Screw
28	153318	Tension Stud
29	81572	Tension Releasing Pin
30	66774-002	Thread Take-up Spring
31	153278-452	Tension, complete, (Colour—Spec. No. 3537) Nos. 66774-002, 81572, 125314, 153276, 153318, 172215, 172218, 172228, 173669-452, 173670-452 and three 172226
32	172226	Tension Disc
33	172228	Thread Take-up Spring Thread Guide
34	173669-452	Tension Indicator (Colour—Spec. No. 3537)
35	125314	Tension Spring
36	172218	Tension Indicator Flange Stop Washer
37	172215	Tension Indicator Flange Adaptor
38	173670-452	Tension Indicator Flange (Colour—Spec. No. 3537)
39	153276	Tension Indicator Flange Adaptor Thumb Nut with 853-858
40	853-858	Tension Indicator Flange Adaptor Thumb Nut Set Screw
41	153277-452	Tension Indicator Flange (Colour—Spec. No. 3537) 173670-452 with 153276 and 172215
42	99069	Needle Bar Rocker Locking Bracket for 509 Machine
43	23258	Needle Bar Rocker Locking Bracket Screw Washer for 509 Machine
44	114019-451	Needle Bar Rocker Locking Bracket Screw (Finish—Spec. No. 1010) for 509 Machine
45	Cat. 2020	Needle
46	140751-851	Needle Thumb Screw
47	310847	Needle Clamp Body
48	116162	Face Plate Thread Guide
49	102523	Needle Bar Gib
50	103943	Tension Releasing Lever Hinge Screw Washer
51	141031-855	Needle Clamp and Needle Stop Screw
52	102522	Needle Bar
53	116166	Needle Bar Rocker Eccentric Hinge Stud for 509 Machine
54	140321-830	Needle Bar Rocker Eccentric Hinge Stud Set Screw
55	179574	Needle Bar Rocker Thrust Washer
56	179567	Needle Bar Rocker Collar with 50150-830
57	50150-830	Needle Bar Rocker Collar Set Screw
58	179573	Needle Bar Rocker Tension Spring
59	179565	Needle Bar Rocker with 50429-830
60	50429-830	Needle Bar Rocker Bracket Hinge Pin Set Screw
61	1258-451	Needle Bar Clamping Screw (Finish—Spec. No. 1003)
62	103291	Needle Bar Connecting Stud
63	102688	Needle Bar Connecting Link
64	1258-451	Thread Take-up Crank Set Screw (Finish—Spec. No. 1003)
65	163990	Needle Bar Crank Thrust Washer
66	96396	Arm Shaft (horizontal) Bushing (front) Retaining Pin
67	103308	Arm Shaft (horizontal) Bushing (front)
68	163990	Arm Shaft (horizontal) Collar Thrust Washer
69	114024-452	Arm Shaft (horizontal) Collar Set Screw (Finish—Spec. No. 1098)
70	103310	Arm Shaft (horizontal) Collar with two 114024-452
71	310797	Arm Shaft (horizontal)
72	153713	Thread Take-up Lever 153712 with 102688
73	153712	Thread Take-up Lever
74	114281-451	Needle Bar Rocker Driving Arm Clamping Screw (Finish—Spec. No. 1003)
75	179566	Needle Bar Rocker Bracket
76	179572	Needle Bar Rocker Bracket Hinge Pin
77	155968	Needle Bar Rocker Driving Arm with 114147-451, 114281-451, 179566 and 310757
78	310757	Needle Bar Rocker Driving Arm Follower
79	114147-451	Needle Bar Rocker Driving Arm Follower Screw (Finish—Spec. No. 1005)
80	116222	Needle Bar Washer (felt)

What are the Feed Regulator and Bight Amplitude Control parts for the SINGER 509?

The following feed regulator and bight amplitude control parts are compatible with the SINGER 509:

Ref. No.	Part No.	Description
5	276301	Disc No. 1 for Zig-Zag Stitching
7	102427	Disc Driving Gear Retaining Clip
8	51045-451	Bight Amplitude Control Lever and Disc Driving Gear Shaft Set Screw (Finish—Spec. No. 1003)
9	179564	Needle Bar Rocker Driving Arm Position Screw Stud
10	179529	Bight Amplitude Control Lever Clamping Plate
12	116090	Bight Amplitude Control Lever with 179529 and 179564
13	114068	Bight Amplitude Control Lever Spring Screw Stud (adjustable)
14	102475	Bight Amplitude Control Lever Spring Screw Stud (adjustable) Friction Washer
15	102426	Bight Amplitude Control Lever and Disc Driving Gear Shaft
17	1258-451	Arm Shaft (horizontal) Driving Worm Gear Set Screw (Finish—Spec. No. 1003)
18	102428	Arm Shaft (horizontal) Driving Worm Gear with two 1258-451
19	102525	Disc Driving Gear
20	179647	Disc Retaining Ring
21	102572	Disc Driving Gear 102525 with 102426 and 102427
22	179527	Bight Amplitude Bracket Hinge Pin
23	140805-451	Needle Position Selector Lever Screw (Finish—Spec. No. 1003)
24	99142	Needle Position Selector Hinge Pin
25	51045-451	Needle Position Selector Hinge Pin Set Screw (Finish—Spec. No. 1003)
26	140805-451	Needle Position Selector Lever Spring Screw (Finish—Spec. No. 1003)
27	153449	Needle Position Selector Lever Spring
28	81566	Needle Position Selector Bracket
29	179580	Needle Position Selector Hinge Pin Collar
30	153003	Needle Position Selector Lever
31	103953	Bight Amplitude Bracket
32	103768	Feed Regulator Mechanism complete
33	102755	Feed Regulator Mechanism Mounting Plate Spring Retainer
34	98188	Feed Regulator Mechanism Mounting Screw Lock Washer
35	114152-819	Feed Regulator Mechanism Mounting Screw
36	103864	Feed Regulator Mechanism Mounting Plate Pawl Spring
37	102754	Feed Regulator Mechanism Mounting Plate Pawl
38	114099-819	Feed Regulator Mechanism Mounting Plate Spring Retainer Screw
39	460-830	Feed Regulator Positioning Pin Knob Set Screw
40	102493-452	Feed Regulator Positioning Pin Knob (Colour—Spec. No. 3508) with 460-830
41	103779-451	Feed Regulator Control Dial (Colour—Spec. No. 3508)
42	310817	Feed Regulator Mechanism Mounting Plate (Finish—Spec. No. 1019)
43	148418	Feed Regulator Mechanism Mounting Plate Retainer
44	310873	Feed Regulator Cam Follower Guide Pin and Mounting Plate Spacer Stud
45	310828	Feed Regulator Cam
46	153680	Feed Regulator Cam Mounting Bracket
47	148418	Feed Regulator Cam Mounting Bracket Retainer
48	155792	Reverse Feed Cam Follower Stud
49	153084	Feed Regulator Positioning Pin Carrier
50	153602	Feed Regulator Positioning Pin
51	102498	Feed Regulator Positioning Pin Carrier 153084 with 153602
52	103380	Feed Regulator Driving Bracket Retainer
53	116067	Feed Regulator Driving Bracket Return Spring
54	000085-805	Feed Regulator Driving Bracket Return Spring Hinge Screw (Finish—Spec. No. 1003)
55	153840	Arm Shaft (horizontal) Bushing (back)
56	103700	Feed Regulator Driving Bracket
57	116068	Feed Regulator Driving Bracket 103700 with 116067
58	114143-850	Clamp Stop Motion Flanged Bushing Set Screw
59	103729	Clamp Stop Motion Flanged Bushing
60	310779-452	Hand Wheel (Colour—Spec. No. 3537)
61	81552	Clamp Stop Motion Clamp Washer
62	153977-453	Clamp Stop Motion Clamp Screw (Colour—Spec. No. 3537)
63	248-829	Clamp Stop Motion Clamp Stop Screw
64	109915-819	Hand Wheel Bobbin Winder Driving Plate Screw
65	153734	Hand Wheel Bobbin Winder Driving Plate (Finish—Spec. No. 1019)
66	116097	Hand Wheel (motor section)
67	511388	Hand Wheel Clutch Spring
68	116098-452	Hand Wheel (treadle section) (Colour—Spec. No. 3537)
69	116099-452	Hand Wheel (motor and treadle), complete, Nos. 116097, 116098-452, 153734, 511388 and three 109915-819

What are the Throat Plate, Hook, and Bobbin Case parts for the SINGER 509?

The parts related to the throat plate, hook, and bobbin case for the SINGER 509 are:

Ref. No.	Part No.	Description
1	310791	Throat Plate Clamp
2	153930	Throat Plate Clamp Spring
3	179658	Throat Plate Clamp Spring Retaining Clip for 507, 527 and 509 Machines
4	155466	Throat Plate Position Pin
5	171392	Throat Plate for 509 Machine
6	310739	Bed Slide for 502, 507 and 509 Machines
7	354229-451	Rotating Hook Bobbin Case Position Plate and Retaining Plate (adjustable) Adjusting Screw (Finish—Spec. No. 1090)
8	381903	Rotating Hook Bobbin Case Retaining Plate (adjustable)
9	44873	Rotating Hook Bobbin Case Position Plate
10	354227-451	Rotating Hook Bobbin Case Position Plate and Retaining Plate (adjustable) Screw (Finish—Spec. No. 1090)
11	354229-451	Rotating Hook Bobbin Case Position Plate Screw (Finish—Spec. No. 1090)
12	103344	Bed Slide Spring
13	354134-451	Bed Slide Spring Screw (Finish—Spec. No. 1019)
17	153330	Arm Shaft (horizontal) Belt Drive Pulley with two 114133-869
18	114133-869	Arm Shaft (horizontal) Belt Drive Pulley Set Screw
19	310726	Belt Tension Pulley, complete
20	114300-451	Belt Tension Adjuster Bracket Screw (Finish—Spec. No. 1019)
21	153343	Belt
22	172336	Rotating Hook Bobbin
23	310886	Rotating Hook Bobbin Case
24	310908	Rotating Hook Bobbin Case Retaining Plate
25	319735	Rotating Hook Bobbin Case Retaining Plate Stud Spring
26	319737	Rotating Hook Bobbin Case Retaining Plate Stud Washer
27	319736	Rotating Hook Bobbin Case Retaining Plate Stud Clip
28	114280-451	Rotating Hook Flanged Bushing (eccentric) Set Screw (Finish—Spec. No. 1003)
29	354133-451	Rotating Hook Flanged Bushing (eccentric) Position Adjusting Screw (Finish—Spec. No. 1003)
30	116087	Rotating Hook Flanged Bushing (eccentric)
31	103372	Rotating Hook
32	379505-451	Feed Dog Screw (Finish—Spec. No. 1050)
33	103377	Feed Dog
34	448-451	Feed Bar Connection and Feed Lifting Fork Connection Hinge Stud (eccentric) Set Screw (Finish—Spec. No. 1003)
35	511183	Feed Bar
36	103648	Feed Bar 511183 with 448-451, 116082, 511016 and two 319561
37	511233	Feed Bar Guide Pin (eccentric) Centre (back)
38	114234-451	Feed Bar Guide Pin (eccentric) Centre (back) Set Screw (Finish—Spec. No. 1003)
39	116235	Feed Bar Guide Pin (eccentric) Centre (front)
40	116082	Feed Bar Connection, complete
41	511016	Feed Lifting Fork Connection
42	319561	Feed Lifting Fork Connection Retaining Ring
43	511056	Feed Lifting Fork Connection Hinge Stud (eccentric)
44	103775	Feed Lifting Fork with 50311-830, 511057-451 and two 511213
45	50311-830	Feed Lifting Fork Connection Hinge Stud (eccentric) Set Screw
46	500391-830	Feed Regulator Set Screw
47	506468	Feed Regulator and Slide Block with 500391
48	116152	Feed Regulator Shaft
49	141738-830	Feed Regulator Shaft Spring Collar Set Screw
50	116151	Feed Regulator Shaft Spring Collar with 141738-830
51	310722	Feed Regulator Shaft Crank with 379506-451
52	379506-451	Feed Regulator Shaft Crank Set Screw
53	141756-803	Feed Regulator Shaft Crank Hinge Screw
54	116148	Feed Regulator Shaft Spring Retainer
55	116149	Feed Regulator Shaft Spring
56	116148	Feed Regulator Shaft Retainer
57	511213	Feed Drive Shaft Retaining Ring
58	141738-869	Feed Drive Shaft Gear Set Screw
59	153487	Feed Drive Shaft Gear with two 141738-869
60	153356	Feed Drive Shaft
61	511213	Feed Lifting Fork Hinge Stud Retaining Ring
62	511057	Feed Lifting Fork Hinge Stud (Finish—Spec. No. 1003)
63	114234-451	Feed Lifting Fork Hinge Stud Set Screw (Finish—Spec. No. 1003)
64	153360	Feed Drive Shaft Bushing (front)
65	354085-451	Feed Drive Shaft Bushing (front) Set Screw (Finish—Spec. No. 1019)
66	114157-869	Rotating Hook Drive Shaft Bevel Gear Set Screw
67	103363	Rotating Hook Drive Shaft Bevel Gear with 114157-869
68	153383	Rotating Hook Drive Shaft Bushing (front)
69	116197	Rotating Hook Drive Shaft
70	141738-869	Rotating Hook Drive Shaft Gear Set Screw
71	153490	Rotating Hook Drive Shaft Gear with 141738-869
72	114312-451	Rotating Hook Collar Set Screw (Finish—Spec. No. 1069)
73	116084	Rotating Hook Collar with 114312-451
74	116073	Rotating Hook Drive Shaft Retainer Washer
75	379506-451	Rotating Hook Drive Shaft Belt Pulley Set Screw (Finish—Spec. No. 1069)
76	116199	Rotating Hook Drive Shaft Belt Pulley with two 379506-451
77	511213	Rotating Hook Drive Shaft Retainer Washer
78	103361	Rotating Hook Bevel Gear with two 114157-869
79	114157-869	Rotating Hook Bevel Set Screw

What Attachments and Accessories are available for the SINGER 509?

The following attachments and accessories are listed for the SINGER 509 model:

Ref. No.	Part No.	Description
2	103486	Feed Cover Needle Plate
4	172336	Bobbin
7	Cat. 2020	Needle (15×1) for regular sewing
8	Cat. 2045	Yellow-Band Needle (15×1) for sewing synthetic materials
11	311800	Spool Pin Adaptor (For Europe Only)
14	103917	Attachment Set (packed in a cardboard box), complete, Nos. 103486, 103489 and three 172336
14	116145	Attachment Set (packed in a cardboard box), complete, Nos. 103486, 103489, 311800 and three 172336 with Instruction Leaflet (For Europe Only)
15	153267	Straight Stitch Foot
16	171392	Straight Stitch Throat Plate
17	161671	Hemmer Foot
18	161172	Seam Guide
19	161307	Needle Threader
20	36865	Edge Stitcher
21	161659	Gathering Foot
22	161876	Darning and Embroidery Foot
24	86742	Ruffler
25	81245	Binder
26	507806	Even Feed Foot

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER