Free English SILENTPOWER IDEFENDER MAX (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SILENTPOWER IDEFENDER MAX (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the primary function of the SILENTPOWER IDEFENDER MAX?
The SILENTPOWER IDEFENDER MAX is a USB-C Ground Loop Breaker and USB Power Injector.
How does the SILENTPOWER IDEFENDER MAX address hum and noise in a computer audio system?
The SILENTPOWER IDEFENDER MAX eliminates all distracting hum and noise by intelligently detecting and disrupting noisy ground loops. It achieves this by disconnecting the PC’s earth, which eliminates audible ground-loop hum and lowers the system’s noise floor for enhanced audio, resolution, and dynamics.
What are the key features of the SILENTPOWER IDEFENDER MAX?
IsoGround features intelligent auto ground loop detection and disconnection
USB Noise Termination effectively cuts noisy USB power at the input
Dedicated USB-C port ensures clean external power input
Compatible with USB 3.0 for high-speed data transfer and includes USB-C connectivity to streamline cable management
Supports up to 20V/5A power for maximum compatibility
Encased in an aluminium alloy housing, which enhances cooling and durability
How do I connect the SILENTPOWER IDEFENDER MAX to my computer or laptop?
You insert the USB-C male connector (labeled 1) into your computer or laptop port.
What do the operational LED colors signify on the SILENTPOWER IDEFENDER MAX?
The operational LED colors indicate the following states:
ORANGE: Connection made between peripheral and device.
WHITE: External 5V power supply active.
Where do I connect my peripheral device, such as a USB DAC, to the SILENTPOWER IDEFENDER MAX?
You connect the peripheral device, such as a USB DAC, to the USB-C female port (labeled 3).
When should I use an external power supply with the SILENTPOWER IDEFENDER MAX?
For USB-powered DACs, it is recommended to use an external supply connected to the external USB-C power supply port (labeled 4) to replace the PC’s power with clean external power. For optimal performance, consider using a high-quality, low-noise 5V power adapter.
What are the input, output, and power support specifications for the SILENTPOWER IDEFENDER MAX?
The specifications are as follows:
| Input/Output | USB-C |
| Compatibility | USB 3.0 |
| ^Max. Power Support | Up to 100W (20V/5A) |
| External input rating | Up to 25W (5V/5A) |
What are the physical dimensions and net weight of the SILENTPOWER IDEFENDER MAX?
The physical specifications are:
| Dimensions | 51.3 x 20 x 12 mm (2.0″ x 0.8″ x 0.5″) |
| Net weight | 23g (0.81oz) |
What cautions must be observed when operating the SILENTPOWER IDEFENDER MAX?
You must follow these cautions when using the SILENTPOWER IDEFENDER MAX:
1. Avoid extreme heat, cold and humidity.
2. Avoid dropping or crushing the SILENTPOWER IDEFENDER MAX.
Is it normal for the SILENTPOWER IDEFENDER MAX to become warm during prolonged use?
Yes, during normal use, the SILENTPOWER IDEFENDER MAX may become quite warm. This is normal and not a cause for concern. However, it is crucial to ensure good ventilation while using this device.
CLICK HERE TO DOWNLOAD SILENTPOWER IDEFENDER MAX (01) PDF DOCUMENT