FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF DOCUMENT.
FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF USER GUIDE.
FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF USER MANUAL.
FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF OWNER GUIDE.
FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF OWNER MANUAL.
FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF REFERENCE GUIDE.
FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF REFERENCE MANUAL.
FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH SHARP 4T-C50GJ4000X (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD SHARP 4T-C50GJ4000X (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do if my SHARP 4T-C50GJ4000X TV experiences certain issues like power failure or damage?
Under the following conditions, you should turn off the TV set immediately, unplug the power cord from the power outlet, and contact authorized maintenance personnel:
• Power failure or unstable voltage.
• Abnormal sound or smell from the device.
• The AC power cord is damaged.
• The TV set is damaged due to falling off, knock, or impact.
• Any liquid or foreign matters enter into the TV set.
What are the power supply and safety warnings for the SHARP 4T-C50GJ4000X?
Please adhere to the following safety warnings:
• Only use a 100-240VAC, 50/60Hz power supply.
• All cables should only be connected or disconnected when the power supply is turned off.
• Do not use a damaged or improper power socket; ensure the plug and socket are connected properly.
• Keep the power plug and socket free of dust and metal pieces.
• Do not damage the power cord: do not refit it, do not place heavy objects on it, keep it away from heat sources, and do not drag the cord when unplugging.
• Do not connect too many appliances to one power strip to avoid fire from high power consumption.
• Do not let an open flame (e.g., a lit candle) approach the TV set.
• Do not touch the plug with wet hands to avoid electric shock.
• During a thunderstorm, unplug the power plug and antenna connector to avoid a lightning strike.
• Do not disassemble the TV set yourself. Contact qualified personnel for maintenance.
What environmental conditions should I avoid for my SHARP 4T-C50GJ4000X TV?
Do not place the TV set in an unstable position, as it may cause it to fall, leading to damage or fire. Avoid placing the TV in the following environments:
1. With direct sunshine, moisture, overheating, undercooling, or heavy dust.
2. With flammable or explosive substances.
3. With flammable or corrosive gas.
4. In a bathroom, kitchen, etc.
Also, do not place containers with water on the TV, and do not penetrate any sharp objects, metal, or liquid into the signal connector or air vents.
How should I care for the screen and handle the SHARP 4T-C50GJ4000X TV?
• Do not rub with a hard object, knock, bend, or squeeze the screen.
• If the screen is broken and liquid splashes on your skin, wash with clean water immediately for 15 minutes and see your doctor.
• To carry the TV set, please grasp the corners and hold the bottom; do not apply force on the panel.
• Displaying the same image for a long time can cause “image persistence,” which is not covered by the warranty. This will not disappear immediately after powering off.
• For healthy watching, watch in appropriate light and adjust the volume to a level that does not hurt your hearing.
How should I clean my SHARP 4T-C50GJ4000X TV?
Before cleaning the TV set, unplug the power cord and wipe it with a soft cloth. Do not use chemical reagents, and avoid foreign substances entering the device. Incorrect cleaning (such as with cleaning fluid, water, etc.) may lead to damage.
What is included in the packing list for the SHARP 4T-C50GJ4000X?
The packing list includes:
1. The TV set
2. User Manual
3. Remote control
4. Power cord (or attached to TV set)
5. VESA screws × 4
6. Batteries × 2
7. Stand × 2
8. Stand screws × 4
How do I install the stands on the SHARP 4T-C50GJ4000X?
1. First, put the TV body on a flat surface with a soft cloth on it, laying it with the screen facing down.
2. Attach the TV stand marked with “R” to the installation part marked with “R”, and the stand marked with “L” to the part marked with “L”. Ensure the arrow mark on the stands faces down.
3. Fasten the stands with the included screws.
What are the clearance requirements for mounting the SHARP 4T-C50GJ4000X?
To ensure proper air circulation and prevent overheating, maintain the following minimum clearances around the TV:
Mount on the base:
• Top: 30cm
• Sides: 10cm
• Bottom: 10cm
• Rear: 7cm from the wall
Mount on the wall:
• Top: 30cm
• Sides: 10cm
• Bottom: 10cm
How do I use the TV Control Key on the SHARP 4T-C50GJ4000X?
The TV Control Key is a single button (marked with a power symbol) located on the TV, which also includes the Power LED indicator and remote receiving window.
When the TV is turned off:
• Short press the key to turn on the TV.
When the TV is turned on:
• The key works only in the Input (TV/AV/HDMI1/HDMI2/USB).
• Short press to display the function menu [Power, (Channel+/-), Volume +/-, Input].
• Short press the key again to select the desired menu item.
• Long press the key to confirm the selected menu item.
For more detailed operations, please use the remote control.
How do I install batteries in the remote control for the SHARP 4T-C50GJ4000X?
Remove the battery compartment cover and insert two AAA (1.5V) batteries. Make sure the polarity of the batteries complies with the polarity marks “+” and “-” inside the battery compartment.
What are the functions of the keys on the SHARP 4T-C50GJ4000X remote control?
| Key | Function |
| Power (circle with line) | Switch between working and standby status. |
| Mute (speaker with x) | Turn on/off the sound. |
| Number keys (0-9) | Select the channel or input numbers. |
| – (Dash) | Return to previous channel. |
| . (Dot) | Decimal point. |
| LIST | Show channel list. |
| GUIDE | Electronic program guide. |
| NETFLIX | Open Netflix application. |
| YouTube | Open YouTube application. |
| prime video | Open Prime Video application. |
| Home (house icon) | Show home page. |
| Directional Arrows | Select items or adjust values. |
| OK | Confirm the operation. |
| Return (curved arrow) | Return to previous menu page. |
| Exit (rectangle with arrow) | Exit OSD menu or application. |
| VOL +/- | Turn up/down the volume. |
| Settings (gear icon) | Show setting menu. |
| Source (square with arrow icon) | Show signal source menu. |
| CH +/- | Change program channel. |
| Red, Green, Yellow, Blue keys | Special function keys. |
| AD/MTS | ATV: select NICAM mode. DTV: select sound track. |
| SUBT./CC | Select Sub title Open / Close Caption. |
| Info (i) | Show information bar. |
| Rewind/Fast forward | Fast backward/forward. |
| Record (dot) | Start to record current program. |
| Play (triangle) | Play function in multimedia. |
| Pause (II) | Time shift key. (PAUSE) |
| Stop (square) | STOP. |
How do I turn the SHARP 4T-C50GJ4000X on or put it in standby?
Plug the power cord into an electrical socket, then press the Power key on the remote control to turn on the TV. When the TV is on, press the Power key to switch to standby mode. The TV adopts energy-saving technology and will automatically enter standby mode after five minutes if there is no signal input.
How do I select an input source on the SHARP 4T-C50GJ4000X?
After connecting a device to one of the TV’s input ports (like HDMI or AV), turn on the device. Then press the Source key (square with an arrow) on the remote control. The signal source menu will appear on the screen. Use the ▲/▼ keys to select the input signal you want, and press the OK key to confirm.
How do I navigate the menu on the SHARP 4T-C50GJ4000X?
1. Press the Settings (gear icon) key to show the main menu on the screen.
2. Press the ▲/▼ key to select a menu from Video, Audio, TV, Setup, Parental, or About.
3. Press the OK or ► key to enter the submenu.
4. Press the ▲/▼ key to select an item in the menu.
5. Press the OK key to confirm.
6. Press the ◄/► or ▲/▼ key to adjust the value or setting.
7. Press the Return (curved arrow) key to go back to the previous menu.
Note: The default password for the lock system is 0000.
How do I scan for channels on the SHARP 4T-C50GJ4000X?
Before scanning, ensure your antenna is connected and you have selected either ATV or DTV as the signal source.
ATV (Analog) Scanning:
1. With ATV source selected, press the Settings key, select TV, then press OK.
2. Select Channel Scan and press OK to start auto scanning.
3. For manual scanning, select Analog Manual Scan, set the Start Frequency (MHz), select Scan Up or Scan Down, and press OK to search.
DTV (Digital) Scanning:
1. With DTV source selected, press the Settings key, select TV > Tuner Mode, and choose DVBT or DVBC.
2. If you selected DVBT, go to TV > Channel Scan and press OK for auto scanning. For manual scanning, go to TV > Manual Scan > RF Channel, select a channel, and press OK.
3. If you selected DVBC, go to TV > Channel Scan. After setting the Scan Mode, select Scan and press OK. For manual scanning, go to TV > Manual Scan, set the Frequency (kHz), Modulation, and Symbol Rate (Ksym/s), then select Scan and press OK.
How do I record programs (PVR) on the SHARP 4T-C50GJ4000X?
First, connect a USB device to the TV. The recording function only supports memorizers with a FAT32 file system.
1. In DTV mode, press the Record (•) key to start recording.
2. Press the Stop (■) key to stop and quit recording.
3. To view recorded files, press the Settings key, select Setup > Record Setting > Record List, and press OK. You can then select a file to play.
How do I use the Time Shift function on the SHARP 4T-C50GJ4000X?
This function allows you to pause and resume live TV using a USB device.
1. In DTV mode, press the Settings key, select Setup > Record Setting > Time Shifting Mode, press OK, and select “on”.
2. While watching a program, press the Pause (II) key. The Time Shift option menu will appear, and the program will be paused.
3. Press the Play (►) key to resume the program.
4. Press the Stop (■) key to stop and quit time-shift.
How do I connect the SHARP 4T-C50GJ4000X to a network?
Press the Settings key, then go to Setup > Network > Configuration > Interface and select either Wireless or Ethernet.
Wireless (Wi-Fi):
1. After selecting Wireless, press OK. Select Wireless Setting > Scan and press OK.
2. The TV will automatically search for available networks. Select your network from the list and press OK.
3. If the network is password-protected, a keyboard will appear. Enter the password, then select Connect and press OK.
Ethernet (Wired):
1. After selecting Ethernet, press OK. Select IP Setting > Address Type > AUTO.
2. Your TV will connect to the network automatically. For manual setup, select Address Type > Manual and enter the IP Address, Subnet Mask, Default Gateway, and DNS settings.
How do I play media files from a USB device on the SHARP 4T-C50GJ4000X?
1. Insert a USB mass storage device into the TV’s USB interface.
2. Press the Home (house icon) key, then use the arrow keys to select Media and press OK.
3. Select the file type: Photo, Music, or Video.
4. Select your local disk device from the file directory and press OK.
5. Navigate to the target folder and file using the arrow keys.
6. Press the Play (►) or OK key to start playback. Press the Return key to go back to the previous page.
While playing, press OK to display or hide the toolbar for playback controls.
What should I do if I see snowflake spots and hear noise on my SHARP 4T-C50GJ4000X?
1. Check if the antenna plug is loose or the cable is in good condition.
2. Check the antenna type (VHF/UHF).
3. Adjust the direction and position of the antenna.
4. Try to use a signal enhancer.
Why is there no display or sound on my SHARP 4T-C50GJ4000X, and the indicator light is off?
Check if the power line is securely connected to the TV and the power outlet.
What can I do if the image on my SHARP 4T-C50GJ4000X is colorless?
Enter the “Video” setting in the menu to increase the color saturation.
What should I do if my SHARP 4T-C50GJ4000X has no sound?
1. Adjust the volume to a proper degree.
2. Press the Mute key on the remote control to cancel mute mode.
The remote control for my SHARP 4T-C50GJ4000X is not working properly. What should I do?
1. Remove any objects that may be blocking the remote control’s receiving window on the TV.
2. Replace the batteries with new ones.
My SHARP 4T-C50GJ4000X is slow, has crashed, or doesn’t work. How can I fix this?
Disconnect the power supply first, wait for about 1-2 minutes, then connect the power supply again and turn on the TV.
What are the technical specifications of the SHARP 4T-C50GJ4000X?
Master Unit Specifications
| Max. Resolution | 3840 × 2160 |
| Power Supply | 100-240VAC 50/60Hz |
| Power Consumption of Speaker | 8W+8W |
| Operating Temperature | 5°C ~ 40°C |
| Operating RH | 20% ~ 80% |
| Supported Systems | ATV: PAL D/K, I, B/G, SECAM D/K, B/G; DTV: DVB-T2 |
| Wireless connection | Wi-Fi (IEEE 802.11 b/g/n) |
| Intelligent operating system | Linux |
Power Management
| Mode | 50″ | 55″ | 65″ |
| Normal working | ≤130W | ≤150W | ≤160W |
| Standby | ≤0.5W | ≤0.5W | ≤0.5W |
What are the instructions for wall mounting the SHARP 4T-C50GJ4000X?
Please follow these instructions when wall mounting your TV:
• Purchase a suitable TV wall mount for your TV model and size.
• Ensure the bearing capacity of the wall is no less than 4 times the weight of the TV set and the wall mount combined.
• Refer to the instructions provided with both the TV set and the wall mount.
• Make sure there are no cables or conduits in the wall section where the mount will be installed.
• It is recommended to entrust a professional technician to complete the installation.
• If there are screws already in the screw holes for the wall mount behind the TV, remove them for later use.
Required Screws:
| Distance between holes on the wall (H×V) (mm) | Required screws (recommended bolt length) (mm) |
|---|---|
| 50″/55″: 300 x 300 | Up: 2 x M6 (18.5+L1 < L ≤ 30+L1), Machine screws Bottom: 2 x ST6 (6+L1′ < L’ ≤ 9.5+L1′), Flat tail self-tapping screws |
| 65″: 300 x 300 | Up: 2 x M6 (18.5+L1 < L ≤ 30+L1), Machine screws Bottom: 2 x M6 (14+L1′ < L’ ≤ 28+L1′), Machine screws |
L1: Thickness of wall mount (Up)
L1′: Thickness of wall mount (Bottom)
CLICK HERE TO DOWNLOAD SHARP 4T-C50GJ4000X (01) PDF DOCUMENT