Free English SHARKOON VK2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SHARKOON VK2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the Form Factor of the SHARKOON VK2?
The Form Factor of the SHARKOON VK2 is ATX.
How many Expansion Slots does the SHARKOON VK2 have?
The SHARKOON VK2 has 7 Expansion Slots.
Does the SHARKOON VK2 feature Interior Painting?
Yes, the SHARKOON VK2 features Interior Painting.
Does the SHARKOON VK2 support Tool-Free Devices Installation?
Yes, the SHARKOON VK2 supports Tool-Free Devices Installation.
What type of Side Panel does the SHARKOON VK2 have?
The SHARKOON VK2 has a Metal Side Panel.
What are the Dimensions (L x W x H) of the SHARKOON VK2?
The Dimensions (L x W x H) of the SHARKOON VK2 are 40.4 x 20.6 x 48.7 cm.
How many 3.5″ Drive Bays does the SHARKOON VK2 have?
The SHARKOON VK2 has 2 3.5″ Drive Bays.
How many 2.5″ Drive Bays does the SHARKOON VK2 have?
The SHARKOON VK2 has 4 2.5″ Drive Bays.
How many USB 3.0 ports are available on the top I/O of the SHARKOON VK2?
There are 2 USB 3.0 ports available on the top I/O of the SHARKOON VK2.
What type of Audio I/O is featured on the top panel of the SHARKOON VK2?
The SHARKOON VK2 features TRRS Audio I/O on the top panel.
What is the pre-installed fan configuration for the Front Panel of the SHARKOON VK2?
The Front Panel of the SHARKOON VK2 comes with 1x 120 mm Fan (Pre-installed), with options for 2x 120 mm Fan (Optional) or Radiator (Optional).
What is the pre-installed fan configuration for the Rear Panel of the SHARKOON VK2?
The Rear Panel of the SHARKOON VK2 comes with 1x 120 mm Fan (Pre-installed), with options for 2x 120 mm Fan or Radiator (Optional).
What are the fan or radiator options for the Top Panel of the SHARKOON VK2?
The Top Panel of the SHARKOON VK2 supports 2x 120 mm or 2x 140 mm Fan or Radiator (Optional).
What are the fan options for the Bottom Panel of the SHARKOON VK2?
The Bottom Panel of the SHARKOON VK2 supports 2x 120 mm Fan (Optional).
What are the compatible Mainboard sizes for the SHARKOON VK2?
The compatible Mainboard sizes for the SHARKOON VK2 are Mini-ITX, Micro-ATX, and ATX.
What is the maximum length for a Graphics Card in the SHARKOON VK2?
The maximum length for a Graphics Card in the SHARKOON VK2 is 35.0 cm or 37.5 cm (Without front fan).
What is the maximum height for a CPU Cooler in the SHARKOON VK2?
The maximum height for a CPU Cooler in the SHARKOON VK2 is 16.0 cm.
What is the maximum length for a PSU in the SHARKOON VK2?
The maximum length for a PSU in the SHARKOON VK2 is 21.0 cm.
What is the maximum height for a Radiator including the Fan on the Front Panel of the SHARKOON VK2?
The maximum height for a Radiator including the Fan on the Front Panel of the SHARKOON VK2 is 5.7 cm.
What is the maximum height for a Radiator including the Fan on the Top Panel of the SHARKOON VK2?
The maximum height for a Radiator including the Fan on the Top Panel of the SHARKOON VK2 is 5.7 cm.
What items are included in the Package Contents for the SHARKOON VK2?
The Package Contents for the SHARKOON VK2 include the VK2 and an Accessory Set.
What is a potential conflict when installing a 360 mm radiator in the SHARKOON VK2?
Installation of a 360 mm radiator in the SHARKOON VK2 can conflict with the installation of a 3.5″ HDD.
How do you install 2.5″ HDDs/SSDs into the SHARKOON VK2?
To install 2.5″ HDDs/SSDs into the SHARKOON VK2, follow these general steps based on the provided illustrations:
1. Identify the mounting location for 2.5″ drives, which appears to be on the back side of the motherboard tray area or another designated mounting bracket.
2. Secure the 2.5″ drive onto a removable mounting tray/cradle using screws (as indicated by red arrows pointing to screw holes).
3. Insert the tray containing the 2.5″ drive into its designated slot inside the case (as shown by blue arrows indicating insertion motion).
4. Some installations may involve sliding the tray assembly into a mounting cage/slot until it locks or is otherwise secured.
How do you install 3.5″ HDDs into the SHARKOON VK2?
To install 3.5″ HDDs into the SHARKOON VK2, follow these general steps based on the provided illustrations:
1. Remove the drive cage or tray assembly from its slot inside the case.
2. Place the 3.5″ HDD onto the drive tray/cradle. Note that there are optional screw positions for securing the HDD to the tray.
3. Secure the 3.5″ HDD to the tray using screws in the appropriate optional mounting holes.
4. Insert the tray containing the 3.5″ HDD back into its designated slot inside the case (as shown by blue arrows indicating insertion motion).
How are Add-On Cards installed in the SHARKOON VK2?
To install Add-On Cards in the SHARKOON VK2:
1. Remove the corresponding expansion slot cover(s) from the rear of the case. These covers are typically held in place by screws.
2. Align the expansion card (like a graphics card or adapter card) with the motherboard slot inside the case and the corresponding opening on the rear panel.
3. Slide the card firmly into the motherboard slot.
4. Secure the card bracket to the chassis using the thumbscrews or standard screws provided (as indicated by screw icons in the final illustration).
How do you detach the Dust Filters from the SHARKOON VK2?
To detach the dust filters from the SHARKOON VK2:
1. For the Top Panel dust filter, pull it upwards away from the top surface of the case.
2. For the Front Panel dust filter, pull it outwards, away from the front of the case, possibly sliding it slightly downwards or outwards depending on the design.
3. For the Bottom Panel dust filter, slide it towards the rear of the case and pull it down and out from underneath the chassis.
How can Fans be installed in the SHARKOON VK2?
To install Fans in the SHARKOON VK2, position the fan(s) at the desired mounting location (e.g., Top Panel or Bottom Panel brackets) ensuring the correct airflow direction based on your cooling configuration (indicated by the fan blade diagram in the illustration).
Secure the fan(s) to the mounting points using the appropriate screws (indicated by red arrow icons).
What radiator sizes can be installed under the Top Panel of the SHARKOON VK2?
Radiator sizes supported under the Top Panel of the SHARKOON VK2 include 120 mm, 140 mm, 240 mm, and 280 mm Radiators.
What radiator sizes can be installed behind the Front Panel of the SHARKOON VK2?
Radiator sizes supported behind the Front Panel of the SHARKOON VK2 include 120 mm, 140 mm, 240 mm, 280 mm, and 360 mm Radiators.
CLICK HERE TO DOWNLOAD SHARKOON VK2 (01) PDF DOCUMENT