SENCOR SWS 16600 (01) PDF Document

Free English SENCOR SWS 16600 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD SENCOR SWS 16600 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

How do I install the SENCOR HOME app for the SENCOR SWS 16600?

The SENCOR HOME and TUYA SMART apps are available for download on the Play Store (Android) and AppStore (iOS).

How do I put the SENCOR SWS 16600 WiFi SH into operational mode automatically for setup?

1) Plug the SENCOR SWS 16600 WiFi SH into a network outlet.

2) Press and hold the [SENSOR/WI-FI] button on the back of the SENCOR SWS 16600 WiFi SH for 8 seconds. The AP and icon will start flashing on the display. When the device is plugged into a network outlet for the first time, AP mode starts automatically.

What are the steps to automatically add the SENCOR SWS 16600 WiFi SH to the SENCOR HOME app?

1. Put the SENCOR SWS 16600 WiFi SH into operational mode.

2. Launch the already installed SENCOR HOME app and follow the instructions below:

Step Action
1 Press the “+” button to expand the menu.
2 Add a new device – the app will try to find all available compatible SENCOR devices nearby. Select the SENCOR SWS 16600 WiFi SH device you want to pair with the application.
3 Press the “Add” button.
4 To add a WI-FI network to the SENCOR SWS 16600 WiFi SH, your mobile phone must be connected to the WI-FI network* during the setup process, which will be transferred to the SENCOR SWS 16600 WiFi SH.
5 Press the icon to go to your smartphone’s system to select from the available WI-FI networks*. The WI-FI network you have selected will then be displayed in point “4”.
6 Enter the password of your home WI-FI network to which the SENCOR SWS 16600 WiFi SH will be connected. Press the button to display your WI-FI network password.
7 Check that the entered WI-FI data is correct and press the “Next” button.
8 Button to change the name of the SENCOR SWS 16600 WiFi SH device.
9 The SENCOR SWS 16600 WiFi SH has been successfully added to the “SENCOR HOME” app.

* always choose WI-FI networks that operate at 2.4 GHz.

What are the steps to manually add the SENCOR SWS 16600 WiFi SH to the SENCOR HOME app?

1. Put the SENCOR SWS 16600 WiFi SH into operating mode:

1) Plug the SENCOR SWS 16600 WiFi SH into a network outlet.

2) Press and hold the [SENSOR/WI-FI] button on the back of the SENCOR SWS 16600 WiFi SH for 8 seconds. The AP and icon will start flashing on the display. When the device is plugged into a network outlet for the first time, AP mode starts automatically.

2. Launch the already installed SENCOR HOME app and follow the instructions below:

Step Action
1 Press the “+” button to expand the menu.
2 Add a new device “Add device”.
3 Select the “Weather stations” group.
4 Select the device “SENCOR SWS 16600 WiFi SH” and follow the steps in the connection wizard.

How is the SENCOR SWS 16600 WiFi SH reset to be paired with a SENCOR HOME app?

If the device was previously connected to the SENCOR HOME app, it cannot be added again to another SENCOR HOME user account. Reset pairing with the SENCOR HOME app is required. RESET is performed in the on state by pressing and holding the “RESET” button on the back of the SENCOR SWS 16600 WiFi SH. Successful reset will be announced by an audible tone.

What does each numbered element represent on the SENCOR SWS 16600 Basic Description of the Application screen?

Outdoor Measurements (7-in-1 unit):

Number Feature
a Temperature.
b Humidity.
c Wind (direction and speed).
d Rainfall.
e Daily rainfall.
f UV index.
g Light intensity.

Indoor Measurements (Internal unit):

Number Feature
a Temperature.
b Humidity.
c Pressure.

Additional 2-in-1 Sensor Measurements:

Number Feature
a Temperature.
b Humidity.

Other elements:

Number Feature
1 “BACK” button – go to the main screen.
2 SENCOR SWS 16600 WiFi SH device name.
3 Advanced menu – Device information, sharing a device to another account, updating a device, REMOVING A DEVICE FROM THE ACCOUNT.
4 Quick dial button to app.weathercloud.net cloud.
5 Quick dial button to wunderground.com cloud.
6 Display of measured values from the outdoor 7-in-1 unit.
7 Display of measured values from the internal unit. Hold down the field to go to the chart view.
8 Display of measured values from the additional 2-in-1 sensor.
9 Set sensor communication channel.
10 List of measured values from all sensors in one complete list.
11 Settings – settings for display units, cloud server settings.
12 Inserting the parameters generated by the Wunderground cloud.
13 Inserting the parameters generated by the Weathercloud cloud.
14 Option to insert parameters of the server you are running.
15 Slide switch to synchronize embedded data with clouds. A green state indicates that synchronization is enabled – the measured data will be written to the clouds.

How can the SENCOR SWS 16600 be connected automatically to other devices using the Smart Life app?

The SENCOR SWS 16600 WiFi SH console can be connected to smart sockets, smart switching devices (like heating elements, fans, light bulbs), humidifiers, and dehumidifiers via IoT applications.

1. Tap the “Scene” icon on the home screen and follow the instructions to set the condition and task.

2. Tap the “+” or “Create Scene” icon.

3. Click on one of the labels below to set different trigger conditions.