Free English SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the physical components of the SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28?
The SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28 features the following external components:
Wireless charging surface
Carabiner mounting point
Two USB-C input/output ports
LED indicator lights
Power button
How do I charge the SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28?
To charge the internal battery of the SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28, follow these steps:
Step 1. Connect a USB-C cable to either of the two available USB-C input/output ports on the side of the device.
Step 2. Connect the other end of the cable to a power source, such as a USB-A wall charger or a USB-C wall charger.
Step 3. The LED indicators will light up to show the charging progress at levels of 25%, 50%, 75%, and 100%.
How can I charge mobile devices using the SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28?
The SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28 supports both wired and wireless charging for various devices:
Wireless Charging: Place compatible devices such as smartphones, wireless earbuds, or smartwatches directly onto the circular wireless charging surface on top of the powerbank.
Wired Charging: Connect your mobile devices to the powerbank using USB-C cables plugged into the USB-C input/output ports. You can charge up to two devices simultaneously via the wired ports while also utilizing the wireless charging surface.
How do I check the battery capacity of the SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28?
To check the remaining energy in your SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28, use the power button:
Press the power button once to activate the LED indicators and view the current capacity level.
Press the power button twice to turn the indicator lights off.
What are the technical specifications for the SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28?
The following table detailed the power and physical specifications of the SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28:
| Capacity | 5000 mAh (18.5 Wh) |
| USB-C port 1+2 Input | 5V/3A, 9V/2A, 12V/1.5A PD (total 18W max) |
| USB-C port 1+2 Output | 5V/3A, 9V/2.22A, 12V/1.67A (total 20W max) |
| Wireless charging | 2.5W, 5W, 7.5W, 10W, 15W |
| Product weight | 120g |
How should I maintain the SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28 for the best battery performance?
For optimal battery performance, it is recommended to fully discharge and then fully recharge the SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28 at least once every three months.
CLICK HERE TO DOWNLOAD SANDBERG 3IN1 MAGNET POWERBANK 5000 421-28 (01) PDF DOCUMENT