SAMSUNG SM-Q505 (01) PDF Document

The SAMSUNG SM-Q505 is a smart ring that helps you analyze your activity patterns or sleep quality and manage your health by continuously measuring your biometric signals. You can use the Ring after connecting it to your phone, and the measured data will be regularly synced with the Samsung Health app on the connected phone.

The SAMSUNG SM-Q505 has the following components:

Ring:

• Optical heart rate sensor

• Temperature sensor

• Orientation indicator

Charging Case:

• Indicator light

• Wireless charging coil

• Charger port (USB Type-C)

• Multipurpose button

• Use the device in a place without magnetic interference for it to operate normally.

• The supplied item contains magnets. Keep it away from credit cards, implanted medical devices, and other devices that may be affected by magnets. For medical devices, keep the item more than 15 cm apart. Stop using it if you suspect interference with your medical device and consult your physician.

• If you have a medical implant in your heart, do not place the supplied item in a pocket close to your implanted device.

• Keep a safe distance between objects affected by magnets (like credit cards, passbooks, access cards) and the supplied item, as they may be damaged or disabled.

• If the Ring is broken, there may be a risk of injury. Use it only after it has been repaired at a Samsung Service Centre.

• The charging case is not water and dust resistant. Be cautious with liquids or dust near the case.

• If foreign materials are on the sensor, measurement may not be accurate. Clean the sensor before wearing the Ring.

• The press marks on the inside of the Ring are from the retainer on the charging case’s Ring holder and do not affect function or performance.

Charge the battery before using your SAMSUNG SM-Q505 for the first time or after a long period of disuse. When the battery is completely discharged, it needs at least 10 minutes to start working.

1. Connect the USB cable to the charger and then plug the USB cable into the charger port on the charging case.

2. Plug the charger into an electric socket.

3. Open the charging case.

4. Align the orientation indicator of the Ring with the marker on the charging case’s Ring holder and place it in the charging case.

5. Close the charging case. The Ring will be charged first, and then the charging case will be charged.

6. After fully charging, disconnect the charging case from the charger. First disconnect the USB cable from the charging case and then unplug the charger from the electric socket.

The charging case has a built-in wireless charging coil and can be charged using a wireless charger (sold separately).

1. Open the charging case.

2. Align the orientation indicator of the Ring with the marker on the charging case’s ring holder and place it in the charging case.

3. Close the charging case.

4. Place the centre of the charging case’s bottom on the centre of the wireless charger.

5. After fully charging, disconnect the charging case from the wireless charger.

Precautions for wireless charging: Do not place the charging case on the wireless charger when conductive materials, such as metal objects and magnets, are between the charging case and the wireless charger, as it may not charge properly or may overheat. Use Samsung-approved wireless chargers for proper charging.

You can charge your SAMSUNG SM-Q505 with the battery of a compatible mobile device that works as a wireless charger.

1. Open the charging case.

2. Align the orientation indicator of the Ring with the marker on the charging case’s ring holder and place it in the charging case.

3. Close the charging case.

4. Turn on the Wireless Power Sharing feature on the device that functions as a wireless charger and place the centre of the charging case’s bottom on that device.

5. After fully charging, disconnect the charging case from the device.

Note: It is recommended to remove any cover from the device acting as a wireless charger. The charging speed and efficiency may vary, and power sharing will stop if the sharing device’s battery drops below a certain level.

You can check the battery level through the Ring’s sensor light or the charging case’s indicator light.

• Ring’s Sensor Light: Remove the Ring from your finger and check the sensor on the inside. If the battery level is 15% or above, a green light will blink. If it is lower than 15%, a red light will blink.

• Charging Case’s Indicator Light: Open the charging case or press the Multipurpose button when the Ring is in the case. The indicator light will turn on for 3 seconds to display the Ring’s remaining battery level. If the Ring is not in the case, it will display the case’s battery level.

• Galaxy Wearable App: You can also check the Ring’s remaining battery level in the Galaxy Wearable app when the Ring is connected to your phone.

• Use only a Samsung-approved charger and the supplied USB Type-C cable.

• Connecting the charger improperly may cause serious damage. Misuse is not covered by the warranty.

• If the charger port is wet, the device may be damaged. Thoroughly dry the charger port before charging.

• To save energy, unplug the charger when not in use.

• Keep the charging case closed while storing or charging the Ring.

• If there is sweat or liquid on the charging contacts, corrosion may occur. Clean them before inserting the Ring in the charging case.

• Charging will start and stop automatically when the Ring is placed in the case.

• To reduce battery consumption when not in use, store the Ring in a charged charging case.

The indicator light on the charging case displays the status of the Ring when it’s in the case, or the status of the case itself when the Ring is not in it. The light turns on when you open the case or press the Multipurpose button.

If the indicator light does not work as described, disconnect and reconnect the charger. If the charging case’s battery is too low, the light will blink or not turn on, and the Ring will not be charged.

Wear the SAMSUNG SM-Q505 so that its orientation indicator is facing towards your palm. It is recommended to wear the Ring on a finger where it is not too tight or loose and can fit comfortably.

Usage Cautions:

• Scratches that occur during normal use are not covered by the warranty, so be careful when using the Ring.

• Wear the Ring on your non-dominant hand.

• Do not wear metal rings next to the Ring.

• Remove the Ring from your finger when lifting or handling heavy or hard things.

• Do not wear the Ring when exercising with equipment, especially with free weights like barbells and dumbbells, as it could hurt your hand.

If the Ring becomes difficult to remove, do the following:

• Wet your finger with cold water and soap, then remove the Ring by turning it around slowly. After removal, rinse and dry your hand and the Ring thoroughly.

• Immerse your finger in cold water and wait for some time until any swelling goes down, then remove the Ring.

• Hold your hand so it is above your heart or rest for some time. When your finger’s circumference returns to normal, remove the Ring.

• If these methods do not work, consult a specialist immediately.

In an emergency, if you need to cut the Ring off, cut it along the orientation indicator to avoid damaging its battery.

First, install the Galaxy Wearable app on your phone. You can download it from the Galaxy Store (for Samsung Android phones) or the Play Store (for other Android phones).

1. Before connecting, ensure the Ring’s battery is sufficiently charged by placing it in the charging case. If the indicator light does not flash, charge the Ring for more than 10 minutes.

2. Close the charging case and then open it. Alternatively, open the case and press and hold the Multipurpose button for more than 3 seconds. The Ring will enter Bluetooth pairing mode automatically, and a pop-up window will appear on your phone.

3. On your phone, tap Connect in the pop-up window and follow the on-screen instructions to complete the connection. You must register your Samsung account on your phone to access all Ring features.

To connect the SAMSUNG SM-Q505 to a new phone, you must first reset the Ring. Note that resetting may delete health data that has not been synced with the Samsung Health app. Sync your data before resetting.

1. On the currently connected phone, open the Galaxy Wearable app and tap Reset → Reset. After the reset, your Ring will enter Bluetooth pairing mode automatically.

2. On your new phone, open the Galaxy Wearable app to connect to your Ring.

When you wear your SAMSUNG SM-Q505 and a Galaxy Watch together, the Watch will function as your primary wearable device. The Ring’s features, other than heart rate and sleep measurement, will turn off. However, if the Watch’s battery is drained or it is otherwise unable to measure data, the Ring can measure the data instead.

The SAMSUNG SM-Q505 supports the following health features for measurement and analysis:

• Sleep monitoring: Sleep time, blood oxygen, snoring, skin temperature, heart rate, respiratory rate, sleep coaching.

• Heart rate monitoring: Heart rate, heart rate alert.

• Activity tracking: Steps, calories burned, activity time, inactive time alert.

• Automatic workout detection: Walking, Running.

• Cycle tracking: Menstruation tracking based on changes in skin temperature during sleep.

• Stress monitoring: Stress level.

• Energy score: The daily score and guidance based on a comprehensive analysis of your sleep pattern, activities, and heart rates.

This feature is for general wellness and fitness, not for medical purposes.

1. Sleep while wearing the Ring. It will start to measure your sleep automatically. Ensure the Ring’s battery is more than 20% before measuring.

2. After you wake up, open the Galaxy Wearable app on the connected phone.

3. Tap Sleep. The Samsung Health app will open, displaying all information related to your measured sleep.

This feature is for general wellness and fitness, not for medical purposes.

1. On the connected phone, open the Galaxy Wearable app.

2. Tap Health settings → Sleep.

3. Tap the Blood oxygen during sleep switch to turn it on.

Your blood oxygen level will be measured along with other sleep records when you sleep wearing the Ring. Note that continuous measurement will drain the battery more quickly.

1. On the connected phone, open the Galaxy Wearable app.

2. Tap Health settings → Sleep.

3. Tap Snore detection.

4. Tap the switch to turn it on.

5. Select Always under Detect snoring. To record audio, tap the Record audio switch to turn it on.

6. Connect your phone to its charger and place the phone’s microphone so it faces you before sleeping.

Your snoring will be measured along with other sleep records. This feature requires the Samsung Health app (version 6.27 or later).

1. On the connected phone, open the Galaxy Wearable app.

2. Tap Health settings → Sleep.

3. Tap the Skin temperature during sleep switch to turn it on.

Your skin temperature will then be measured along with your other sleep records when you sleep while wearing the Ring. Note that this feature will drain the battery more quickly than normal.

To check your measured heart rate:

1. On the connected phone, open the Galaxy Wearable app.

2. Tap Heart rate. The Samsung Health app screen will appear, showing your measured heart rate.

To measure your heart rate manually in the Samsung Health app:

1. On the connected phone, open the Galaxy Wearable app and tap Heart rate.

2. Tap Measure to begin measuring.

3. Check the measured heart rate on the screen. You can add a status tag to the measurement.

4. Tap Save to store the record.

Note: Manual measurement is not possible with the Ring if you are also wearing a Galaxy Watch and its heart rate feature is set to automatic measurement.

You can receive an alert from the Samsung Health app when your heart rate is higher or lower than a set value for more than 10 minutes.

1. On the connected phone, open the Galaxy Wearable app.

2. Tap Health settings → Heart rate alert.

3. Tap the switch of the alert you want to use (High HR or Low HR) to turn it on and set the heart rate range.

You can check your stress level using the bio data collected by your SAMSUNG SM-Q505.

1. On the connected phone, open the Health app.

2. Access the stress card.

3. Tap Measure to begin measuring your stress level. Check the result on the screen.

4. Tap Save to store the record.

Note: For accurate measurements, wear the Ring firmly. Stress may not be measured while sleeping, working out, or moving a lot.

This feature uses your skin temperature while you sleep to track your menstrual cycle and predict your next period. It is for managing and tracking purposes only, not for medical use, pregnancy planning, or contraception.

1. On the connected phone, open the Galaxy Wearable app.

2. Tap Health settings.

3. Tap the Predict period with skin temp switch to turn it on.

4. Set your period’s start date and end date, and tap Next.

5. Set your cycle length and tap Done.

When you exercise continuously for a certain period while wearing the SAMSUNG SM-Q505, it automatically recognizes the activity and records information like exercise type, duration, and calories burned. When you stop exercising for more than one minute, it automatically stops recording.

To manage this feature:

• On the connected phone, open the Galaxy Wearable app and tap Health settings → Activities to detect. Here you can see the list of supported exercises. If an exercise is not recognized automatically, you can turn on the auto detect workouts feature and select the specific exercise type.

You can remotely control your phone’s camera or alarm by double pinching with your thumb and the finger you wear the Ring on.

1. On the connected phone, open the Galaxy Wearable app.

2. Tap Gestures and tap the switch of the action you want to control to turn it on.

• Dismiss alarm: When an alarm expires on the phone, dismiss it with the gesture.

• Take picture or video: When using the phone’s camera, take a picture or start/stop recording a video with the gesture.

If you misplace your SAMSUNG SM-Q505, you can use the Samsung Find app on your connected phone to locate it.

1. On the connected phone, open the Galaxy Wearable app and tap Find my ring.

2. The Samsung Find app will open, allowing you to check the location of your Ring. You can also find it by following the lights emitted from the Ring.

Note: To use this feature, Samsung Find’s features for finding devices offline must be turned on. It may take 4 minutes or more to search for the Ring nearby.

Resetting the SAMSUNG SM-Q505 will reset all its settings and may delete health data that has not been synced with the Samsung Health app. It is recommended to sync data with the Samsung Health app before resetting.

On the connected phone, open the Galaxy Wearable app and tap Reset.

You can update your Ring’s software through the firmware over-the-air (FOTA) service.

On the Galaxy Wearable screen of the phone, tap Ring software update.

• Download and install: Check for and install updates manually. Make sure to open the charging case before beginning the manual update.

• Auto update: Set to install updates automatically when the Ring is in the charging case.

Your SAMSUNG SM-Q505 is water and dust resistant (10ATM, IPX8, IP6X). To maintain this resistance:

• After swimming in a pool or the sea, rinse the device with fresh water and dry it thoroughly with a soft, clean cloth before the pool/sea water dries on it.

• If the device gets wet with liquids other than fresh water (e.g., coffee, soapy water, perfume, sunscreen), rinse it with fresh water and dry it thoroughly with a soft, clean cloth.

• Do not go freediving, scuba diving, or engage in fast-moving water sports like jet skiing while wearing the device.

• Do not expose the device to high-pressure cleaning machines.

• If the device is hit or damaged, its water and dust resistance may be compromised.

• Do not dry your device with a heat source like a hair dryer or use it in a hot environment like a sauna, as this can damage water resistance.

Follow these points to ensure your SAMSUNG SM-Q505 works correctly and maintains its appearance:

• Clean the Ring’s sensor at least once a week. Foreign material can interfere with biometric signal detection. Wipe the Ring with a soft cloth or rinse it with a soap-free detergent and dry it thoroughly.

• Prevent the device from being exposed to dust, sweat, ink, oil, and chemical products (cosmetics, antibacterial spray, etc.). If exposed, clean it with a lint-free, soft cloth.

• Never use ultrasonic waves, soap, cleaning agents, abrasive materials, compressed air, or external heat sources to clean the Ring, as this may cause damage.

• When removing sunblock, lotion, or oil, use a soap-free detergent, then rinse and dry your Ring thoroughly.

• The battery may be completely discharged. Charge the battery completely before use.

• If the Ring is too loose, health data may not be measured. Wear it on a finger where it fits firmly, with the orientation indicator facing your palm and the sensor in good contact with your skin.

• If your Ring is frozen and unresponsive, put it in the charging case and press and hold the charging case’s Multipurpose button for more than 7 seconds to restart it.

• If the above methods do not solve the problem, perform a reset. On the connected phone, open the Galaxy Wearable app and tap Reset.

• Take the Ring out of the charging case and then put it back in, or press and hold the charging case’s Multipurpose button for more than 3 seconds to enter Bluetooth pairing mode.

• Reset your Ring and try again.

• Ensure your Ring and the other Bluetooth device are within the Bluetooth connection range (10 m).

• Ensure the Bluetooth feature on the phone is on and check if the Ring’s battery is charged.

• Ensure there are no obstacles, such as walls or electrical equipment, between the devices.

• Ensure the latest version of the Galaxy Wearable app is installed on your phone. If not, update it.

• Ensure your Ring and the phone are within the Bluetooth connection range (10 m). The distance can vary depending on the environment.

• Restart the phone and reopen the Galaxy Wearable app.

If you are using a Samsung-approved charger, try the following:

• Ensure that the charging contacts of the Ring and the charging case are in contact with each other.

• Ensure that the charger is connected properly to the charging case.

• If the charging contacts are dirty, the battery may not charge properly. Wipe the charging contacts with a dry cloth and try charging the battery again.

• Exposing the Ring or its battery to very cold or very hot temperatures can reduce the useful charge.

• Battery consumption increases when you use certain features.

• The battery is a consumable part, and its useful charge will shorten over time.

• When you are not using the Ring, store it in a charged charging case. If not, the sensor will continue to work, affecting usage time and battery consumption.

When you use features that require more power for an extended period, your Ring may feel hot. This is normal and should not affect its lifespan or performance. If the Ring overheats or feels hot for a prolonged period, stop using it for a while. If it continues to overheat, contact a Samsung Service Centre or an authorized service centre.