SAMSUNG GALAXY S5 (02) PDF MANUAL

• Proximity sensors: Detect the presence of objects near the device.

• Front camera: Take self-portraits and record videos of yourself.

• Power key: Press and hold to turn the device on or off, restart it, or for quick access to Airplane and Emergency modes. Press to lock or wake up the screen.

• Back: Return to the previous screen, or close a dialog box, menu, or keyboard.

• Home key/Finger scanner: Tap to return to the Home screen. Activate the Fingerprint security feature.

• Recent: Tap to display recent apps, or touch and hold for Home screen options.

• Volume key: Adjust the volume of your device’s sounds and audio playback.

• Status light: Display a light when the battery is low, charging, or fully charged, when a notification arrives, or when recording voice.

• Earpiece: Listen to a call.

• Microphone: Record audio and detect voice commands.

• Infrared transmitter: Control external devices using infrared light.

• Rear camera: Take pictures and record videos.

• Heart rate sensor: Measure your heart rate using your fingertip when using the S Health™ app.

• USB charger/Accessory port: Connect the USB charger (included), and other optional accessories (not included).

• Speaker: Play music and other sounds.

• Flash: Illuminate subjects in low-light environments when taking a photo or recording video.

• Headset jack: Connect an optional headset.

1. Remove the back cover using the slot on the top left of your device.

2. Lift the cover up and to the right of the device.

Warning: Do not bend or twist the back cover excessively. Doing so may damage the cover.

Carefully slide the SIM card into the SIM card slot.

• Make sure that the card’s gold contacts face into the device and that the angled corner of the card is positioned as shown.

Caution: If the SIM card is not inserted correctly, the device cannot detect it. Reorient the SIM card and place it back into the slot if it is not detected.

Warning: Please be careful when handling the SIM card to avoid damaging it. Keep all SIM cards out of reach of small children.

1. Insert the battery into the opening on the back of the device, making sure the connectors align.

2. Gently press down to secure the battery.

1. Place the back cover onto the back of the device and press down.

2. Press along the edge of the back cover until you have a secure seal.

This device is rated IP67. It is important that all compartments are closed tightly. Follow these tips carefully to prevent damage to the device:

• Whenever your device gets wet, dry it thoroughly with a clean, soft cloth.

• Do not expose the device to salt water or ionized water, or to water over 1.0 meters deep for more than 30 minutes. If your device is exposed to fresh water, dry it thoroughly with a clean, soft cloth. If the device is exposed to any liquid other than fresh water, rinse the device with fresh water immediately and dry it thoroughly with a clean, soft cloth. Failure to rinse the device in fresh water and dry it as instructed may cause the device to suffer from operability or cosmetic issues.

• Do not expose the device to water at high pressure.

• If the device is dropped or receives an impact, the water and dust resistant features of the device may be damaged.

• The touchscreen and other features may not work properly if the device is used in water or in other liquids. [040616]

1. Insert the USB cable into the port.

2. Connect the USB cable to the charging head, and then plug the charging head into a standard outlet.

3. When charging is complete, unplug the charging head from the outlet and remove the USB cable from the device.

Note: It is recommended you fully charge the battery before using your device for the first time.

Caution: Use only charging devices and batteries approved by Samsung. Samsung accessories are designed for your device to maximize battery life. Using other accessories may invalidate your warranty and may cause damage.

Caution: Failure to unplug the wall charger before you remove the battery can cause damage to the device.

When the battery is weak and only a few minutes of operation remain, the device sounds a warning tone at regular intervals. In this condition, your device conserves its remaining battery power by dimming the screen. When the battery level becomes too low, the device automatically turns off.

For a quick check of your battery level, view the battery charge indicator located in the upper-right corner of your device’s display. A solid color icon indicates a full charge.

• You can also choose to display a percentage value. Viewing a percentage value can provide a better idea of the remaining charge on the battery. For more information, see Battery settings.

Note: If your device has gotten wet, you should dry the inside of the charging port before inserting a power connector to charge your device. If the charging port is not fully dry, your device may operate abnormally. For example, it may charge more slowly or overheat.

Press and hold the Power key until the device vibrates and starts up.

1. Press and hold the Power key until the device vibrates and the Device options menu is displayed.

2. Tap Power off.

The first time you turn your device on, a Welcome screen is displayed. It guides you through the basics of setting up your device.

Follow the prompts to choose a default language, connect to a Wi-Fi® network, set up accounts, choose location services, learn about your device’s features, and more.

Note: Voice Assistant provides voice prompts and descriptions of items on the screen to improve accessibility. During setup, you can enable or disable Voice Assistant by pressing the Home key quickly three times.

By default, the device locks automatically when the screen times out.

To lock the device: Press the Power key.

The default Screen lock on your device is Swipe.

To unlock your device: Press the Power key or Home key, and then touch and drag your finger across the screen.

Note: To choose a more secure screen lock, see Set a Screen Lock options in settings.

When you turn on your device for the first time, set up your existing Samsung account or create a new Samsung account.

Alternatively, to create a new Samsung account or set up your Samsung account on your device at any time:

From a Home screen, tap Apps > Settings > Accounts > Add account > Samsung account.

When you turn on your device for the first time, set up your existing Google Account, or create a new Google Account.

Alternatively, to create a new Google Account or set up your Google Account on your device at any time:

From a Home screen, tap Apps > Settings > Accounts > Add account > Google.

• Status bar: Displays device status icons (right) and notification icons (left).

• Status icons: Displays information about the device, such as the network signal strength, battery level, and the time.

• App folders: Groups multiple apps into a folder.

• Apps list: Allows quick access to all of your applications.

• Primary app shortcuts: Displays these shortcuts on all Home screens.

• Home screen indicator: Indicates which Home screen is currently visible.

• App shortcuts: Launches your favorite applications.

• Widget: Runs as a simple application extension (not a shortcut) on a Home screen.

• Notification icons: Displays new messages and emails, available software updates, and more.

From a Home screen, pinch the screen.

or

Touch and hold an empty space on the screen.

1. From a Home screen, pinch the screen.

2. Tap Wallpapers to customize.

To access Wallpaper settings directly:

From a Home screen, tap Apps > Settings > Wallpaper.

1. From a Home screen, pinch the screen.

2. Use these options to manage screens:

• Add a screen: Swipe to the end of the screens, and then tap + Add.

• Remove a screen: Touch and hold a screen, and then drag it to Remove.

• Set a screen as the main Home screen: Tap Main Home screen at the top of a screen. This screen is displayed when you press the Home key.

• Change the order of screens: Touch and hold a screen, and then drag it to a new position.

• Tap Home screen settings and tap an option to customize.

– Transition effect: Select a transition to use when swiping between screens.

– Flipboard Briefing: Swipe to the left of the screens to find the Flipboard Briefing screen. To enable or disable this feature, tap On/Off at the top of the screen.

1. From a Home screen, pinch the screen.

2. Tap Widgets.

3. Touch and hold a widget, drag it to a Home screen, and release it.

1. From a Home screen, touch and hold a widget to release it.

2. Drag the widget to Remove and release it.

Note: Removing a widget does not delete the widget, it just removes the widget from the Home screen.

1. From a Home screen, tap Apps.

2. Touch and hold an app shortcut, drag it to a Home screen, and release it.

1. Touch and hold a shortcut to release it.

2. Drag the app shortcut to Remove and release it.

Note: Removing a shortcut does not delete the app, it just removes the shortcut from the Home screen.

1. From a Home screen, touch and hold an app shortcut.

2. Drag the shortcut onto Create folder and release.

• Enter folder name: Enter a name for the folder.

• Palette: Change the color.

• + Add application: Place additional apps in the folder, and then tap Done.

3. Tap anywhere outside of the folder to close it.

• To add more apps, touch and hold an app shortcut and drag it to the folder.

1. Tap a folder to open it and access the shortcuts inside.

2. To add shortcuts to a folder, touch and hold the shortcut, and then drag it onto the folder and release.

3. To delete a folder, touch and hold the folder until it detaches, and then drag it to Remove and release.

• Battery full: Battery is fully charged.

• Battery low: Battery is low.

• Battery charging: Battery is charging.

• Vibrate mode: Vibrate mode is enabled.

• Mute mode: Mute mode is enabled.

• 4G LTE active: The device is connected to a 4G LTE wireless network.

• Signal strength: Cellular network signal strength.

• Network not available: No wireless network is available.

• Wi-Fi active: Wi-Fi is active.

• Wi-Fi available: A Wi-Fi network is available.

• NFC enabled: NFC (Near Field Communication) is enabled.

• Missed call: A call has been missed.

• Call in progress: A call is in progress.

• Call on hold: A call is on hold.

• New email: New email has arrived.

• New Gmail: New Gmail has arrived.

• New voicemail: New voicemail message has been received.

• New message: New text or multimedia message has arrived.

• File download in progress: Download of a file or app is in progress.

• File upload in progress: File is being uploaded or sent.

• GPS active: Location service (GPS) is active and acquiring a signal.

• App updates available: App updates are available from the Google Play store.

• App updates complete: App installation or updates are complete.

Use the following motions and gestures:

Tap: Lightly tap items to select or launch them.

• Tap the keyboard to enter characters or text.

• Tap an item to select it.

• Tap an app icon to launch the application.

Touch and Hold: Touch and hold items on the screen to activate them.

• Touch and hold a widget on a Home screen to move it.

• Touch and hold a field to display a pop-up menu of options.

Swipe: Lightly drag your finger vertically or horizontally across the screen.

• Swipe the screen to unlock the device.

• Swipe the screen to swipe through the Home screens or menu options.

Drag: Touch and hold an item, and then move it to a new location.

• Drag an app shortcut to add it to a Home screen.

• Drag a widget to place it in a new location on a Home screen.

Pinch and Spread: Pinch the screen using your thumb and forefinger or spread by moving your fingers apart.

• Pinch the screen to zoom out while viewing a picture or a web page.

• Spread your fingers on the screen to zoom in while viewing a picture or a web page.

1. From a Home screen, tap Apps > Settings > Motions and gestures.

2. Tap each option and then tap On/Off to enable each feature.

• More options: Tap to view more menu options for a screen. This often allows you to select items to delete or share.

• Delete: Tap to select items to delete.

• Share: Tap to select items to share, and a sharing method.

• Edit: Tap to customize the screen.

• On/Off button: Tap to turn the option on (ON) or off (OFF).

• Checkbox: Tap to enable or select. When enabled, a checkmark is displayed. You can often tap a checkbox at the top of the screen to select all.

• Menu: Tap to view available options for the field.

• Settings: Display the Settings screen.

• View all: See all available Quick settings.

• Quick connect: Search for nearby devices to connect with quickly and easily.

• Clear notifications: Clear all notifications.

• Notification card: View details about a notification.

• S Finder: Search your device for apps, contacts, messages, email, files, settings, and more.

• Screen brightness: Adjust screen brightness.

• Quick settings: Quickly enable or disable a feature.

1. Drag down the Status bar to display the Notification panel.

2. Swipe down the list to see notification details.

• Tap an item to open it.

• To clear a single notification, drag the notification left or right.

• To clear all notifications, tap Clear.

3. To close the Notification panel, swipe upward from the bottom of the screen or tap Back.

1. Drag down the Status bar to display the Notification panel.

2. Tap S Finder.

3. Tap the Search bar and type what you are searching for.

• You can narrow the search by tapping Category, Time, Tag, or Location and using preset search options. Items that match your search will appear below.

4. Tap items to open them.

To view additional Quick settings:

Swipe left or right across the visible icons.

– or –

Tap View all.

1. Drag down on the Status bar to display the Notification panel.

2. Tap Quick Connect. Your device automatically scans for compatible devices.

• You may be asked to set device visibility. Tap Always visible or Only when Quick connect turned on.

• Tap Refresh to manually scan.

3. Tap a device from a list and follow the prompts.

1. Drag down the Status bar to display the Notification panel.

2. Tap Quick connect.

3. Tap More > Set device visibility, and choose an option.

From a Home screen, tap Apps > Settings > Notification panel.

1. From a Home screen, tap Apps > Settings > Multi window.

2. Tap On/Off to activate.

3. Tap the following option to activate it:

• Open in Multi window view: Automatically view content in Multi window™ when you open files from My Files or Video player, or attachments from email.

Tip: You can also activate Multi window from the Notification panel.

After activating Multi window, you can use it to run multiple apps at the same time.

Touch and hold Back to display the tray, and then drag apps to the windows.

Note: Only apps located on the Multi window tray can be used together. Additional Multi window apps are available from the Google Play store.

Select an application window and tap Window controls in the middle of the window border.

• Switch windows: Switch locations between Multi window apps.

• Drag and drop content: Move items between the app windows. Drag an item to share from one window to another. Not all applications support this feature.

• Maximize window: Open the selected app window in full screen view.

• Close app: Close the selected app.

1. Touch and hold Back to display the tray, and then drag apps to the windows.

2. Swipe to the bottom of the Multi window tray, and then tap Tray Controls > Create.

1. Touch and hold Back to display the tray.

2. Touch and hold an app, drag it to a new position in the tray and then drop it.

1. Touch and hold Back to display the tray.

2. Tap Tray Controls > Edit for options:

• To remove an app from the tray, tap and drag it off of the tray and place it in the storage area.

• To add an app to the tray, tap and drag it from the storage area to the tray.

• To relocate an app, tap and drag it to a new location.

From a Home screen, tap Apps > Settings > Multi window.

1. From a Home screen, tap Apps > Settings > Language and input.

2. Tap Samsung keyboard for options.

Note: The available options depend on the app in use. Not all options are available for all apps. Predictive text suggests words matching your text entries and can learn your personal writing style.

• Sym (Symbol): Tap to insert symbols.

Touch and hold Options for the following:

• Voice input: Enter text using Google Voice™ typing.

• Handwriting: Use your handwriting to enter text.

• Clipboard: Access the clipboard.

• Keyboard settings: Access keyboard settings.

• Emoticon: Insert an emoticon at the cursor position.

• Keyboard types: Change the layout of the keyboard.

1. On the Samsung Keyboard, tap Voice input. You may need to touch and hold Options (left of Space) to find it.

2. Speak your text.

Note: Tap Settings > Languages to download additional languages for use with Google Voice typing.

1. From a Home screen, tap Apps > Settings > Language and input.

2. Tap Google voice typing for options.

1. Press and hold the Power key to display the Device options window.

2. Tap Emergency mode.

• When accessing for the first time, read the Terms and conditions. If you accept them, tap the Checkbox, and then tap Agree. Confirm when prompted.

3. Tap Turn on.

Note: When Emergency mode is turned off, the Location settings may stay the same as they were in Emergency mode.

From the Emergency mode Home screen, tap More > Turn off Emergency mode.

Emergency mode saves battery power by changing the screen to grayscale, restricting application usage, turning off Mobile data when the screen is off, and turning off Wi-Fi and Bluetooth®.

The following apps and features are available on the Home screen in Emergency Mode:

• Flashlight: Use the device’s flash as a steady source of light.

• Emergency alarm: Sound an audible siren.

• Share my location: Send your location information to your emergency contacts.

• Phone: Launch the call screen.

• Internet: Launch the Web browser.

• + Add: Add other available apps (e.g., Maps: Launch Google Maps™).

• Battery percentage: Display estimated battery charge remaining.

• Estimated max standby: Display estimated standby time that can be reached based on current battery charge and usage.

• Emergency call: Dial the emergency telephone number (for example, 911). This kind of call can be made even without activated cellular service.

• More options:

– Turn off Emergency mode: Disable Emergency mode and return to standard mode.

– Remove: Choose apps to remove from the screen.

– Manage emergency contacts: Add emergency contacts if none have been set in Safety Assistance.

– Settings: Configure the available settings. Only a limited number of settings are enabled in Emergency mode.

• More options: Access Speed dial and Call settings.

• Delete number: Delete the numbers entered.

• Call: Make a call.

• Voicemail: Set up and check your voicemail.

• Keypad: Dial the number that you want to call.

• Tabs: Display a log of all dialed, received, and missed calls (Log). Display contacts marked as favorites (Favorites). Display your contacts and select a contact to call (Contacts).

1. From a Home screen, tap Phone.

2. Enter a number and tap Call.

1. From a Home screen, tap Apps > Contacts.

or

From a Home screen, tap Phone > Contacts.

2. While viewing your contact list, swipe your finger across a contact to the right to call the contact.

1. From a Home screen, tap Phone.

2. Tap Log. A list of recent calls is displayed.

3. Tap a contact, and then tap Call.

At the incoming call screen:

• Touch and drag Answer in any direction to answer the call.

or

• Touch and drag Reject in any direction to reject the call and send it to your voicemail.

If you are using an application, a popup screen is displayed for the incoming call. On the incoming call popup screen:

• Tap Answer to answer the call.

or

• Tap Reject to reject the call and send it to your voicemail.

or

• Tap Expand to view the main call screen.

When you are ready to end your call, tap End call.

If you exit the call screen and return to a Home screen, your active call is indicated by Call in progress on the Status bar, and a thumbnail.

To return to the call screen:

• Tap Reactivate to return to the call screen.

To end a call from any application:

• Swipe the Status bar downward to reveal the Notification panel, and then tap End.

Press the Volume key to increase or decrease the volume.

or

Quickly add more volume to the incoming audio by tapping More options > Extra volume.

Tap Speaker to hear the caller using the speaker.

or

Tap Bluetooth to use a Bluetooth headset (not included).

1. From the active call, tap Add call to dial the second call. The first call is displayed as a thumbnail.

2. Dial the new number and tap Call.

• Tap Swap to switch between the two calls.

• Tap Merge to hear both callers at once (multi conferencing).

To answer a new call while you have a call in progress:

1. Slide Answer in any direction to answer the new call.

2. Tap an option:

• Put [Caller] on hold to place the previous caller on hold while you answer the new incoming call.

• End call with [Caller] to end the previous call and answer the new call.

3. Tap Swap to switch between the two calls. This places the new caller on hold and activates the previous call.

1. From a Home screen, tap Phone.

2. Tap Log. A list of recent calls is displayed. If the caller is in your contacts list, the caller’s name is displayed.

1. From a Home screen, tap Phone.

2. Tap Log.

3. Tap the call that contains the information that you want to save to your contacts list.

4. Tap Create contact.

– or –

If you want to replace the number for an existing contact, tap Update existing.

1. From a Home screen, tap Phone.

2. Tap Log.

3. Touch and hold the call you want to delete from the Call log.

4. Tap Delete.

By adding a caller to your Reject list, future calls from this number are sent directly to your voicemail.

1. From a Home screen, tap Phone.

2. Tap Log.

3. Touch and hold the caller you want to add to the Reject list.

4. Tap More options > Add to Auto reject list.

From a Home screen, tap Phone > More options > Settings > Call.

or

From a Home screen, tap Apps > Settings > Call.

You can assign 100 speed dial numbers.

1. From a Home screen, tap Phone > Keypad.

2. Tap More options > Speed dial. The Speed dial screen is displayed showing the numbers 1 through 100. Number 1 is reserved for voicemail.

3. Tap an unused number. A list of your contacts is displayed.

4. Tap a contact to assign to the number. The selected contact is displayed in the speed dial number box.

1. From a Home screen, tap Phone > Keypad.

2. Tap More options > Speed dial.

3. Find the contact to remove from Speed dial and tap X Remove.

1. From a Home screen, tap Phone > Keypad.

2. Touch and hold the speed dial number.

• If the speed dial number is more than one digit long, enter the first digits, then hold the last digit.

You can dial the emergency telephone number from your device whether or not cellular service has been activated. If your device is not activated, you can only make an emergency call.

1. From a Home screen, tap Phone.

2. Enter the emergency telephone number (911 in North America) and tap Dial.

3. Complete your call. During this type of call, you have access to most in-call features.

If the Lock screen is set to Swipe:

1. Drag Phone upward to open the call screen.

– or –

Swipe across the screen to unlock it, and then tap Phone.

2. Enter the emergency telephone number (911 in North America) and tap Dial.

3. Complete your call. During this type of call, you have access to most in-call features.

You can make calls even if your device has a secure lock screen.

Note: The first step differs depending on the device and Lock screen settings.

1. Drag Phone upward to open the call screen.

2. Tap Emergency call to display the Emergency dialer.

3. Enter the emergency telephone number (911 in North America) and tap Dial.

4. Complete your call. During this type of call, you have access to most in-call features.

1. From the Home screen, tap Phone, then tap Voicemail.

2. Follow the tutorial to create a password, record a greeting, and record your name.

Note: These steps may be different depending on your network.

1. From the Home screen, tap Phone, then tap Voicemail.

• You may be prompted to enter a password.

2. When connected, follow the voice prompts from the voicemail center.

1. From another phone, dial your wireless phone number. Wait until you hear your voicemail greeting.

2. Press the asterisk or star (*) key on the phone you are using.

3. Enter your password and you are connected to your Voicemail.

1. From a Home screen, tap Apps > Visual Voicemail.

2. Read the information and tap Next.

3. Tap a voicemail message to play it back.

Note: You must subscribe to the Visual Voicemail service to use this feature. Charges may apply. Please contact your service provider for further details.

To check Visual Voicemail messages:

1. From the Voicemail screen, tap the voicemail message you want to play.

2. Tap Play.

To delete Visual Voicemail messages:

1. From the Voicemail screen, tap the voicemail message you want to delete.

2. Tap Delete > OK.

1. From a Home screen, tap Apps.

2. Tap an application’s icon to launch it.

3. To return to the main Home screen, press the Home key.

• Play Store: Download new apps from the Google Play store.

• Galaxy Apps: View and download Samsung apps that are optimized for use with Galaxy devices.

1. From a Home screen, tap Apps.

2. Tap More options > Downloaded apps.

• Preloaded apps cannot be uninstalled.

• Apps that are disabled are turned off and hidden from view.

1. From a Home screen, tap Apps.

2. Tap More options > Uninstall/disable apps. Apps that can be uninstalled or disabled show Uninstall/disable on their icon.

3. Tap Uninstall/disable and follow the prompts to either uninstall or disable the app.

1. From a Home screen, tap Apps.

2. Tap More options > Show disabled apps.

3. Tap each app you want to enable, and then tap Done.

1. From a Home screen, tap Apps.

2. Tap More options > Sort by.

3. Tap an option:

• Custom: Touch and hold, and then drag app icons to arrange them in any order.

• Alphabetical order: App icons are arranged in alphabetical order.

To create a folder:

1. From a Home screen, tap Apps.

2. Tap More options > Create folder.

3. Enter a folder name.

4. Tap Add application, select apps to include in the folder, and then tap Done.

5. Tap a folder to view its apps.

• Tap an app to launch it.

• Tap Palette to select a background color for the folder.

To delete a folder:

1. From a Home screen, tap Apps > More options > Remove folder.

2. Select the folder to delete and tap Done.

1. From a Home screen, tap Apps.

2. Tap More options > Hide apps.

3. Tap apps to hide, and then tap Done.

1. From a Home screen, tap Apps.

2. Tap More options > Show hidden apps.

3. Tap apps to unhide, and then tap Done.

1. From a Home screen, tap Apps.

2. Tap More options for these options:

• Edit: Touch and hold an app icon then drag it to:

– Create folder to create a new folder.

– App info to view information about this app.

– Turn off to disable the app.

– Uninstall to uninstall the app. Preloaded apps cannot be uninstalled.

• Create folder: Create a new folder to hold apps.

• Remove folder: Remove folders that you have created.

• Sort by: Choose how apps are listed.

• Downloaded apps: View downloaded apps. Tap an icon on the Downloaded applications screen to launch the application.

• Uninstall/disable apps: Uninstall an app that you downloaded to your device or disable a preloaded app (preloaded apps cannot be uninstalled). Tap Uninstall/disable to remove or disable the selected app.

• Hide apps: Hide apps from the Apps list.

• Show disabled apps: Display disabled apps. This option is displayed only if apps have been disabled.

• Show hidden apps: Display hidden apps. This option is displayed only if apps have been hidden.

• Galaxy essentials: View and download Samsung apps that are optimized for use with Galaxy devices.

• Help: View information about your device.

When Google Now™ is enabled, you can also access it by tapping G Google.

1. From a Home screen, tap Apps > Calculator.

2. Enter the first number using the numeric keys.

3. Tap the appropriate arithmetic function key.

4. Enter the next number.

5. To view the result, tap the Equals key.

When Screen rotation is enabled, turn the device to landscape.

Note: Screen rotation is found in the Quick settings of the Notification panel.

To clear the results:

• Tap C Clear.

To clear the calculator history:

• Tap History > Clear history.

To copy all or part of the calculation to the clipboard:

• Touch and hold an entry in the display field.

1. From a Home screen, tap Apps > Calendar.

2. Tap New event and use one of the following methods:

• Add event: Enter an event with an optional repeat setting.

• Add task: Enter a task with an optional priority setting.

3. Enter details for the event or task, and then tap Save.

1. From a Home screen, tap Apps > Calendar.

2. Tap an event or task to view it.

3. Tap Share via, select a sharing method, and follow the prompts.

1. From a Home screen, tap Apps > Calendar.

2. Tap an event or task to view it.

3. Tap Delete.

1. Tap More options > Delete.

2. Select events or tasks.

3. Tap Done.

1. From a Home screen, tap Apps > Calendar.

2. Tap More options > Settings.

3. Tap an option and follow the prompts.

• Record video: Record a video.

• Take a picture: Take a picture.

• Shooting mode: Change the shooting mode.

• Gallery: Open the Gallery to view photos and videos.

• More settings: Change other camera settings.

• Quick settings: Select camera settings or options.

• Switch cameras: Switch between the rear and front cameras.

• Current shooting mode: Indicates which shooting mode is active.

1. From a Home screen, tap Apps > Camera.

2. Using the display screen as a viewfinder, compose your shot by aiming the camera at the subject. While composing your picture, use the available options or these gestures:

• Touch the screen with two fingers and pinch or spread them on the screen to zoom in and out.

• Tap the screen to focus on the area you tapped.

3. If desired, before taking the picture, you can touch the icons to access various camera options and settings. You can also touch the screen to move the focus field to the area you touch.

4. Tap Capture to take the picture.

Note: You can also press the Volume key up or down to take a picture. This is the default action of the Volume key. You can also set the Volume key to act as the video record key or as a zoom key.

Several shooting modes are available. Some modes are not available when taking self-portraits.

1. From a Home screen, tap Apps > Camera.

2. Tap Mode to display the Shooting modes.

3. Tap Info to read a description of all modes.

Take pictures and record videos using the front and rear cameras at the same time.

1. From a Home screen, tap Apps > Camera.

2. Tap Mode > Dual camera.

3. Touch and drag the inset picture to another position on the screen.

4. Tap the inset picture, and then touch and drag the corners to enlarge or reduce the size of the inset.

5. Tap Effects, and then tap a style for the inset picture.

Reorganize shortcuts for easy access to the camera’s various options.

1. From a Home screen, tap Apps > Camera.

2. Tap Settings to quickly change Camera settings. The available options vary by mode.

3. Touch and hold an option and drag it to the left side of the screen.

4. Touch and drag a Quick setting icon to change the position of the icon or to change which Quick settings to use.

1. From a Home screen, tap Apps > Camera.

2. Tap Settings to configure settings for Camera. Available options vary depending on the camera or recording mode used.

• Picture size: Select a resolution. Use higher resolution for higher quality. Higher resolution pictures take up more memory.

• Burst shots: Take a series of pictures of moving subjects.

• Low-light detection: Take brighter and clearer pictures without using the flash at night.

• Face detection: Detect faces in pictures for tagging with the person’s name.

• ISO: Select an ISO value. This controls camera light sensitivity. Low values are for stationary or brightly-lit objects. Higher values are for fast-moving or poorly-lit objects.

• Metering modes: Select a metering method. This determines how light values are calculated. Center-weighted measures background light in the center of the scene. Spot measures the light value at a specific location. Matrix averages the entire scene.

• Tap to take pics: Tap the image on the preview screen to take pictures.

• Selective focus: Make objects stand out from the background. They must be within 1.5 feet from you, and at least 3 times this distance from the background.

• Video size: Select a resolution. Use higher resolution for higher quality. Higher resolution videos take up more memory.

• Recording mode: Select Normal, Limit for email, or Fast motion mode.

• Video stabilization: Activate anti-shake. Anti-shake helps to keep the focus steady when the camera is moving.

• Audio zoom: While recording videos, zooming in on an object amplifies sound from that area and diminishes the surrounding sound.

• Effects: Add special graphical effects.

• Flash: Activate or deactivate the flash.

• Timer: Take time-delayed pictures or videos.

• HDR (rich tone): Save the picture in HDR (rich tone) only.

• Location tags: Attach a GPS location tag to the picture.

• Save as flipped: Automatically save images as flipped in the Gallery. (This option is only available for the Front camera).

• Storage location: Select the memory location for storage.

• Review pics/videos: Set to show pictures or videos after taking them.

• Remote viewfinder: Take pictures using the viewfinder of a connected device. Wi-Fi Direct is required.

• White balance: Select an appropriate white balance, so images have a true-to-life color range. The settings are designed for specific lighting situations.

• Exposure value: Change the exposure value. This determines how much light the camera’s sensor receives. For low light situations, use a higher exposure.

• Grid lines: Display viewfinder grid lines to help composition when selecting subjects.

• Shutter sound: Enable or disable a shutter sound every time you capture an image.

• The Volume key: Use the Volume key as the camera key, the record key, or as a zoom key.

• Voice control: Set the camera to take pictures with voice commands.

• Help: View information on using the camera.

• Reset settings: Reset the camera settings.

1. From a Home screen, tap Apps > Clock.

2. Tap a tab to use a feature:

• Alarm: Set an alarm to ring at a specific time.

• World clock: View the time of day or night in other parts of the world. World clock displays time in hundreds of different cities, within all 24 time zones around the world.

• Stopwatch: Measure intervals of time.

• Timer: Use a timer to count down to an event based on a preset time length (hours, minutes, and seconds).

1. From a Home screen, tap Apps > Clock.

2. Tap Alarm.

3. Tap + Create alarm to configure:

• Time: Set a time for the alarm.

• Days: Choose the days to use this alarm.

• Repeat weekly: Repeat the alarm every week.

• Alarm type: Choose whether the alarm uses sound, vibration, or vibration and sound to alert you.

• Alarm tone: If you have chosen an alarm type that includes sound, choose a sound to play for the alarm.

• Volume: If you have chosen an alarm type that includes sound, drag the slider to set the volume of the alarm.

• Snooze: Allow snoozing. Set a time interval and number of repeats for snoozing.

• Smart alarm: When on, the alarm starts playing a tone at a low volume at an interval before the alarm time, and slowly increases in volume. Choose a time interval and a tone to use with smart alarm. Available when you have chosen an alarm type that includes sound.

• Name: Enter a name for the alarm.

4. Tap Done.

1. From a Home screen, tap Apps > Clock.

2. Touch and hold an alarm, and then tap Delete.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Screen mode, and then choose a screen mode.

• To have your device automatically optimize the display to match the type of image being displayed and other criteria, such as battery level, tap Adapt display.

– or –

Choose a specific type of screen mode based on what you are viewing.

Your device analyzes the images displayed on the screen and automatically adjusts the brightness to conserve battery power.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Auto adjust screen tone to turn the feature on.

The Daydream™ setting controls what the screen displays when the device is docked (dock not included), or while charging. You can choose to display colors, or display photos stored on your device.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Daydream.

3. Tap On/Off to turn Daydream on and configure the following options:

• Colors: Display a changing screen of colors.

• Flipboard: Display pictures from Flipboard. Tap Settings for options.

• Photo table: Display pictures in a photo table. Tap Settings for options.

• Photo frame: Display pictures in a photo frame. Tap Settings for options.

4. Tap More options > Preview to see a demonstration of Daydream.

Select which functions (such as charging or low battery) the LED indicator displays on the front of the device.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > LED indicator for options.

Set the length of time Recent and Back remain lit after you touch them.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Touch key light duration to choose a timeout period.

Increase the sensitivity of the touch screen to improve results when wearing gloves.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Increase touch sensitivity to turn the feature on.

Change the look of the home and lock screens with wallpaper. You can display a favorite picture or choose from preloaded wallpapers.

1. From a Home screen, tap Apps > Settings.

2. Tap Wallpaper.

3. Tap Home screen, Lock screen, or Home and lock screen.

4. Tap an image to preview it, and then tap Set as wallpaper.

• Tap From Gallery for additional wallpapers.

• Tap Bubbles or Phase beam for animated wallpaper. (Animated wallpaper consumes additional battery power.)

• Tap Travel wallpaper to set up that option (Lock screen only).

Choose a method for unlocking your screen. Different Screen Locks have different levels of security and options.

1. From a Home screen, tap Apps > Settings.

2. Tap Lock screen.

3. Tap Screen lock to select a screen lock and level of security:

• Swipe: Swipe the screen to unlock it. This option provides no security.

• Pattern: A screen unlock pattern is a tap gesture you create and use to unlock your device. This option provides medium security.

• PIN: Select a PIN to use for unlocking the screen. This option provides medium to high security.

• Password: Create a password for unlocking the screen. This option provides high security.

• Fingerprint: Use fingerprint recognition to unlock the screen. This option provides medium to high security.

• None: Never use a Lock screen.

4. Select your notification preferences, if you choose a secured lock screen option:

• Show content

• Hide content

• Do not show notifications

5. Choose a screen lock option based on the type selected (Swipe Only, Pattern Only, PIN, Pattern, Password and Fingerprint Only, or All Screen Lock Types).

• Phone shortcut: Display a phone shortcut on your Lock screen.

• Unlock effect: Set the visual effect used when unlocking the screen.

• Help text: Show help information on unlocking the screen on the Lock screen.

• Pattern type: Select a pattern type.

• Make pattern visible: Display the pattern as you draw it.

• Vibration feedback: Vibrate when the unlock pattern is entered incorrectly.

• Lock automatically: Screen locks 5 seconds after screen automatically turns off.

• Lock instantly with power key: Screen locks instantly when locked with the power key.

• Dual clock: Display a dual clock on your Lock screen when roaming.

• Clock size: Select the size of the clock that is displayed on your Lock screen.

• Show date: Display the date on the Lock screen.

• Camera shortcut: Display a camera shortcut on your Lock screen.

• Owner Information: Show owner information on the Lock screen.

• Additional information: Display Weather information or the step count when Pedometer in S Health is turned on.

1. From a Home screen, tap Apps > Settings > Multi window.

2. Tap On/Off to enable. The following option is available:

• Open in Multi window view: Automatically view content in a multi window when you open files from My Files or Video, or attachments from email.

1. From a Home screen, tap Apps > Settings > Notification panel.

– or –

From the Notification panel, tap View all > Edit.

2. The following options are available:

• Brightness adjustment: Adjust the screen brightness and volume from the Notification panel.

• Recommended apps: Show selected apps on the Notification panel after certain actions, such as connecting earphones. Tap On/Off to turn the feature on.

To customize which quick setting buttons display at the top of the Notification panel:

Touch and drag buttons to reorder them.

To use the default layout:

Tap Reset.

When you perform certain actions, such as plugging in earphones, the Notification panel can display shortcuts to your favorite related apps, such as Music Player or Google Play Music.

1. From a Home screen, tap Apps > Settings.

2. Tap Notification panel > Recommended apps.

3. Tap On/Off to turn the feature on.

4. Tap Edit and choose which apps to display on the Notification panel when you insert earphones.

The Toolbox is a floating shortcut menu that is displayed on every screen, giving you quick access to your favorite apps.

To activate the Toolbox:

1. From a Home screen, tap Apps > Settings.

2. Tap Toolbox.

3. Tap On/Off to enable the feature.

4. Tap Edit to choose up to five apps to display in Toolbox.

Adjust the screen size and layout for easy control of your device with one hand.

To enable One-Handed Operation features:

1. From a Home screen, tap Apps > Settings.

2. Tap One-handed operation.

3. Tap On/Off to turn it on or off.

• When activated, hold the device in one hand and swipe from the midpoint to the left or right edge of the screen to the middle and back, in one quick motion.

Switch between the default screen layout and a simpler layout. The Easy Mode layout has larger text and icons, making for a more straightforward visual experience.

1. From a Home screen, tap Apps > Settings > Easy mode.

2. Tap Easy mode to enable this feature.

• When Easy mode is enabled, you can swipe down the page and select which apps you want to display on the Home screens.

3. Tap the checkbox next to the apps you want to add or remove.

4. When finished, tap Done.

1. From a Home screen, tap Settings.

2. Tap Easy mode > Standard mode to exit Easy mode.

3. Tap Done to confirm.

Accessibility services are special features that make using the device easier for those with certain physical disabilities.

1. From a Home screen, tap Apps > Settings.

2. Tap Accessibility for options.

• Switch Access: Use this option to control your device using configurable key combinations. Tap On/Off to turn the feature on. Tap Settings for more options.

• TalkBack: Speak feedback aloud to help blind and low-vision users. Tap Settings for more options. (TalkBack can collect all of the text you enter, except passwords, including personal data and credit card numbers. It may also log your user interface interactions with the device.)

• Dark screen: Keep the screen turned off at all times for privacy. TalkBack must be enabled in order to configure this option.

• Rapid key input: Release your finger to enter selection instead of double tapping. TalkBack must be enabled in order to configure this option.

• Speak passwords: Read the characters aloud as you enter your passwords. TalkBack must be enabled in order to configure this option.

• Font size: Set the font size.

• High contrast fonts: Adjust the color and outline of fonts to increase the contrast with the background.

• Magnification gestures: Use exaggerated gestures such as triple-tapping, double pinching, and dragging two fingers across the screen.

• Notification reminder: Play a beep when a notification for a call, message, and so on, has been missed.

• Negative colors: Reverse the display of colors from white text on a black background to black text on a white background.

• Color adjustment: Adjust the color of the screen if you are color blind or have difficulty reading the display because of the screen color. Tap Color adjustment for options.

• Accessibility shortcut: Quickly enable accessibility features in two quick steps. Tap On/Off to turn the feature on.

• Text-to-speech options: Set your preferred TTS engine and options.

• Flash notification: Set your camera light to blink whenever you receive a notification.

• Turn off all sounds: For privacy, turn off all notifications and audio.

• Hearing aids: Improve the sound quality of your device for use with hearing aids.

• Samsung subtitles (CC): Use Samsung subtitles with multimedia files when available. Tap Samsung subtitles (CC) for options.

• Google subtitles (CC): Use Google subtitles with multimedia files when available. Tap Google subtitles (CC) for options.

• Sound balance: Use the slider to set the Left and Right balance when using a stereo device.

• Mono audio: Switch audio from stereo to mono for use with one earphone.

• Baby crying detector: Vibrate the device to alert you when baby crying is detected.

• Assistant menu: Improve the device accessibility for users with reduced dexterity.

• Air wake up: Wake up your device by waving your hand over the sensor.

• Press and hold delay: Select a time interval for this action.

• Interaction control: Block areas of the screen from touch interaction. Disable Auto rotate screen and hard key functions. Only show application notifications in the Notification panel and the Status bar.

• Direct access: Open your accessibility settings by pressing the Home Key three times in quick succession.

• Answering and ending calls: Answer calls by pressing the Home key, using voice commands, waving your hand over the device, or by pressing the Power key.

• Single tap mode: Tap to stop/snooze alarms and calendar events.

• Manage accessibility: Export your accessibility settings and share them with another device.

Additional accessibility apps may be downloaded from the Google Play store. Certain accessibility services you install may be configured here (under Services in Accessibility settings).

Hide personal content from being accessed by anyone else using your device. Private mode is only available for certain applications. Note: A secure screen lock (Pattern, PIN, Fingerprint, or Password) is required to use Private Mode.

1. From a Home screen, tap Apps > Settings.

2. Tap Private mode.

3. Follow the prompts to learn about and set up Private mode.

You can register up to 3 fingerprints. A password is also set up as an alternative to your fingerprint.

1. From a Home screen, tap Apps > Settings.

2. Tap Finger scanner > Fingerprint manager.

3. Swipe your finger over the Home key to register your first fingerprint or to continue to the next screen.

If no fingerprints are registered, the manager automatically opens the Register fingerprint screen. Otherwise:

Tap + Add and follow the instructions to register a fingerprint and password.

Touch and hold the fingerprint, and then tap Edit.

Touch and hold the fingerprint, and then tap Delete.

1. From a Home screen, tap Apps > Settings.

2. Tap Finger scanner > Change backup password.

3. Scan your fingerprint.

4. Enter a new backup password.

1. From a Home screen, tap Apps > Settings.

2. Tap Finger scanner for options.

• Screen lock: Change your Screen lock and access Screen lock settings.

• Web sign-in: Access your online accounts using your fingerprint.

• Verify Samsung account: Verify your identity using your fingerprint when logging in to your Samsung account.

• Pay with PayPal: Link your PayPal account to your device to make faster and more secure PayPal payments using any of your registered fingerprints.

Control certain device actions by touching the screen with the palm of your hand.

1. From a Home screen, tap Apps > Settings.

2. Tap Motions and gestures.

3. Tap an option, and tap On/Off to enable each of the following:

• Air browse: Scroll through pages or lists of items by moving your hand over the sensor in the direction that you would like to scroll.

• Direct call: Call the contact whose call log, message, or contact details are currently on the screen by bringing the device close to your ear.

• Smart alert: Set the device to vibrate when you pick it up to notify you about missed calls and messages.

• Mute/pause: Mute or pause sounds and video by covering the screen or turning over the device.

• Palm swipe to capture: Capture an image of the screen when you sweep your hand left or right across the screen.

Preview information, extend text, or enlarge pictures by hovering your finger over the screen.

1. From a Home screen, tap Apps > Settings.

2. Tap Air view.

3. Tap On/Off to turn the feature on.

1. From a Home screen, tap Apps > Settings.

2. Tap Accounts > Add account.

3. Tap one of the account types.

4. Follow the prompts to enter your credentials and set up the account.

1. From a Home screen, tap Apps > Settings.

2. Tap Accounts > [Account type].

3. Tap an account to view the sync settings for that account.

4. Check individual data items to sync.

5. Tap More options > Sync now or Sync all to synchronize the account.

Each account has its own set of settings. In addition, you can configure common settings for all accounts of the same type.

1. From a Home screen, tap Apps > Settings.

2. Tap Accounts > [Account type].

3. Tap an account to configure that account’s sync settings.

– or –

Tap Settings or other available options to configure common settings for all accounts of this type.

1. From a Home screen, tap Apps > Settings.

2. Tap Accounts > [Account type].

3. Tap the account, and then tap More options > Remove account.

1. From a Home screen, tap Apps > Settings.

2. Tap Cloud.

3. If you have not signed in to your Samsung account, tap Add Samsung account.

– or –

Tap your Samsung account to manage your sync settings and backup options.

4. Tap to view the following Samsung account information:

• Backup: Manage your back up and restore options.

• Restore: Retrieve data from your Samsung account.

1. From a Home screen, tap Apps > Settings.

2. Tap Cloud.

3. If you have not signed in to your Dropbox account, tap Link Dropbox account.

– or –

Tap your Dropbox account to manage your sync settings and backup options.

4. Follow the prompts to set up and use Dropbox.

1. From a Home screen, tap Apps > Settings.

2. Tap Backup and reset for options:

• Back up my data: Enable back up of application data, Wi-Fi passwords, and other settings to Google servers.

• Backup account: Select a Google Account to be used as your backup account.

• Automatic restore: Enable automatic restoration of settings from Google servers. When enabled, backed-up settings are restored when you reinstall an application.

You can reset Wi-Fi, Mobile data, and Bluetooth settings with Reset network settings.

1. From a Home screen, tap Apps > Settings.

2. Tap Backup and reset > Reset network settings.

3. Tap Reset settings, and confirm when prompted.

Return your device to its factory defaults. Warning: This action permanently erases ALL data from the device, including Google or other account settings, system and application data and settings, downloaded applications, as well as your music, photos, videos, and other files.

1. From a Home screen, tap Apps > Settings.

2. Tap Backup and reset > Factory data reset.

3. Tap Reset device and follow the prompts to perform the reset.

Collect diagnostics data for troubleshooting.

1. From a Home screen, tap Apps > Settings.

2. Tap Backup and reset > Collect diagnostics.

3. Tap any of the options to read the description and decide if you want to enable the feature.

• Diagnostics: Help T-Mobile troubleshoot your device issues.

• Issue Assist: Optimize Wi-Fi connectivity and diagnose network issues.

• Personalized Offers: Receive T-Mobile offers that will improve your experience.

1. From a Home screen, tap Apps > Settings.

2. Tap Language and input > Language.

3. Select a language from the list.

1. From a Home screen, tap Apps > Settings.

2. Tap Language and input > Default.

3. Select a keyboard.

1. From a Home screen, tap Apps > Settings.

2. Tap Language and input > Samsung keyboard for options:

• English (US): Set the keyboard type to Qwerty keyboard or 3×4 keyboard.

• Select input languages: Choose which languages are available on the keyboard. To switch between languages, slide the space bar sideways.

• Predictive text: Allow Predictive text to suggest words matching your text entries, and, optionally, complete common words automatically. Predictive text can learn your personal writing style from your contacts, messages, Gmail, and social networking sites-improving its accuracy of predicting your text entries.

• Additional keyboard settings provide assistance with capitalization, punctuation, and much more.

Speak rather than type your text entries using Google Voice Typing.

1. From a Home screen, tap Apps > Settings.

2. Tap Language and input.

3. Tap Google voice typing for options:

• Languages: Select languages for Google voice typing.

• “Ok Google” detection: Tap to launch a Google search whenever you say “OK Google”.

• Hands-free: Allow requests with the device locked.

• Speech output: Select options for spoken feedback.

• Offline speech recognition: Download and install speech recognition engines, allowing you to use voice input while not connected to the network.

• Block offensive words: Hide search results that contain offensive words.

• Bluetooth headset: Use audio input from a Bluetooth headset (not included), if one is connected.

Configure your Text-To-Speech (TTS) options. TTS is used for various accessibility features, such as TalkBack.

1. From a Home screen, tap Apps > Settings.

2. Tap Language and input > Text-to-speech options for options:

• Choose either the Samsung or Google text-to-speech engine. Tap Settings next to each TTS engine for options.

• Speech rate: Set the speed at which the text is spoken.

• Listen to an example: Play a sample of speech synthesis (available if voice data is installed).

• Default language status: Display the default language in use.

Set the device to read new notifications aloud for incoming calls, messages, and emails, as well as caller or sender information.

1. From a Home screen, tap Apps > Settings.

2. Tap Language and input > Read notifications aloud.

3. Tap the checkbox to enable each option.

Configure settings for using an optional mouse or trackpad (not included).

1. From a Home screen, tap Apps > Settings.

2. Tap Language and input > Pointer speed.

3. Drag the slider to the right to go faster or to the left to go slower.

4. Tap OK to save your setting.

By default, your device receives date and time information from the wireless network. When you are outside network coverage, you may want to set date and time information manually using the date and time settings.

1. From a Home screen, tap Apps > Settings.

2. Tap Date and time. The following options are available:

• Automatic date and time: Receive date and time updates from the wireless network.

• Set date: Enter the current date (only available when Automatic date and time is disabled).

• Set time: Enter the current time (only available when Automatic date and time is disabled).

• Automatic time zone: Receive the current time zone from the wireless network.

• Select time zone: Choose your local time zone (only available when Automatic time zone is disabled).

• Use 24-hour format: Set the format for displaying time.

Use Emergency mode to conserve battery power during emergencies. Power-hungry apps and functions are disabled, but you are still able to send messages, use Contacts, and make emergency calls.

1. From a Home screen, tap Apps > Settings.

2. Tap Safety assistance > Emergency mode.

3. Tap On/Off to turn the feature on.

Receive information about weather, environmental situations, and geological information for your location during emergencies.

1. From a Home screen, tap Apps > Settings.

2. Tap Safety assistance > Geo News.

3. Tap On/Off to turn the feature on.

• Geo News notification pop-ups: Receive popup alerts.

Send a quick alert to your primary contacts when you are in an emergency situation.

To enable this feature:

1. From a Home screen, tap Apps > Settings.

2. Tap Safety assistance > Send help messages.

3. Tap On/Off to turn the feature on and configure the following options:

• Send pictures: Send photos taken with the front and back cameras to your emergency contacts.

• Send sound recording: Send a short audio message to your emergency contacts.

To send a help message:

Press the Power key quickly three times.

Select contacts or create new ones to be your emergency contacts. These contacts automatically receive your help message.

1. From a Home screen, tap Apps > Settings.

2. Tap Safety assistance > Manage primary contacts.

3. Tap Create primary contact and choose one of the following options:

• Create contact: Enter a name and phone number for a new emergency contact.

• Select from contacts: Designate a contact to be an emergency contact.

Configure options when using HDMI audio devices (not included).

1. From a Home screen, tap Apps > Settings.

2. Tap Accessories > Audio output.

3. Select a sound output format to use when connecting your device to HDMI devices (not included). Some devices may not support the surround sound setting.

View how battery power is used for device activities.

1. From a Home screen, tap Apps > Settings.

2. Tap Battery for options:

• Battery usage: View battery usage since the battery was last fully charged.

– Past and predicted usage: View a chart of past usage and estimated time remaining.

– Recent battery usage: Tap an item to view details of its battery usage.

– More options: Tap Optimize battery usage to select apps and optimize their individual battery usage. Tap Refresh to update the listing.

• Detail: View details on apps that have an abnormal amount of battery usage.

• Percentage on status bar: Display the battery charge percentage next to the battery icon on the Status bar.

Conserve battery power by automatically adjusting the screen brightness, limiting the performance of the CPU, and other power reduction activities. Ultra power saving mode saves even more battery power by using a gray scale theme on the Home screen and limiting the number of usable apps.

1. From a Home screen, tap Apps > Settings.

2. Tap Power saving for options:

• Power saving mode: Save battery power by limiting your device’s performance, limiting vibration feedback, and restricting location services and most background data.

• Ultra power saving mode: Save battery power by applying a simplified grayscale theme to your Home screen and limiting the number of usable apps.

Tip: Tap More options > Help to display more information about conserving power.

View and manage the memory used by the device.

1. From a Home screen, tap Apps > Settings.

2. Tap Storage.

• Device storage used out of the total space available is displayed.

3. Tap Internal storage for the following:

• Total space: The total space in your device’s memory.

• Available space: The amount of storage space currently available.

• System memory: The minimum amount of storage space required to run the system.

• Used space: The amount of storage space currently being used.

• Other: The space used by app data, downloaded files, and Android system files.

• Cached data: The amount of data currently cached.

• Explore: Launch My Files to view content stored on your device.

1. From a Home screen, tap Apps > Settings.

2. Tap Storage.

3. Tap Cached data to clear cached data for all apps.

4. Tap Delete to confirm.

You can use an optional microSD or microSDHC card (not included) to add additional memory space to your device. Once an optional memory card has been installed in your device, the card memory is displayed as Total space and Available space.

1. Remove the back cover.

2. With the gold contacts facing down, carefully slide the memory card into the slot.

3. Replace the back cover.

When you install an optional memory card, it is automatically mounted (connected to the device) and prepared for use. However, should you unmount the card without removing it from the device, you have to mount it before it can be accessed.

1. From a Home screen, tap Apps > Settings.

2. Tap SD card > Mount.

Warning: To prevent damage to information stored on the memory card, unmount the card before removing it from the device.

1. From a Home screen, tap Apps > Settings.

2. Tap SD card > Unmount.

3. Remove the back cover.

4. Slide the card out.

5. Replace the back cover.

Warning: When formatting an SD card, you should back up your music and photo files that are stored on the card because formatting the SD card deletes all the stored data.

1. From a Home screen, tap Apps > Settings.

2. Tap SD card > Format and follow the prompts.

1. From a Home screen, tap Apps > Settings.

2. Tap Security for options:

• Device administrators: Add or remove device administrators.

• Unknown sources: Enable installation of non-Google Play applications. (Warning: Enabling installation of third-party applications can cause your device and personal data to be more vulnerable to attacks by unknown sources.)

Require a numeric PIN or password to decrypt your device each time you power it on or encrypt the data on a memory card (not included) each time it is connected.

1. From a Home screen, tap Apps > Settings.

2. Tap Security for options:

• Protect encrypted data: Encrypt all data on your device.

• Encrypt external SD card: Encrypt data on a memory card (not included).

Use this option to set up your password when one is first required or change your current password.

1. From a Home screen, tap Apps > Settings.

2. Tap Security > Set up SIM card lock and follow the prompts.

Display password characters briefly as you type them.

1. From a Home screen, tap Apps > Settings.

2. Tap Security > Make passwords visible to turn the feature on.

Automatically receive security updates.

1. From a Home screen, tap Apps > Settings.

2. Tap Security for options:

• Security policy updates: Automatically or manually check for security policy updates.

• Send security reports: Send security reports to Samsung using Wi-Fi for threat analysis.

Manage your security certificates. If a certificate authority (CA) certificate gets compromised or for some other reason you do not trust it, you can disable or remove it.

1. From a Home screen, tap Apps > Settings.

2. Tap Security for options:

• Storage type: Select a storage location for credential contents.

• Trusted credentials: Display certificates in your device’s ROM and other certificates you have installed.

• Install from device storage: Install a new certificate from storage.

• Clear credentials: Erase the credential contents from the device and reset the password.

Protect your device with these advanced security options.

1. From a Home screen, tap Apps > Settings.

2. Tap Security for options:

• Trust agents: Perform selected actions when trusted devices are connected. (To view Trust agents, set up a secured screen lock.)

• Pin windows: Pin a specific app on your device screen. Follow the prompts.

• Usage data access: View the applications that can access your device’s usage history.

• Smart Lock: Set your device to stay unlocked when you have trusted devices connected or when it’s in a trusted place. (To view Smart Lock, set up a secured screen lock.)

• Do not disturb permission: View which apps have permission to change the Do not disturb settings.

View tips and guidelines for using your device.

1. From a Home screen, tap Apps > Settings.

2. Tap Help for information about:

• New features

• Getting started

• Applications

• Settings

View information about your device, including status, legal information, hardware and software versions, and a tutorial.

1. From a Home screen, tap Apps > Settings.

2. Tap About device, and then tap items for more details:

• Download updates manually: Check for software updates.

• Scheduled software updates: Set a time to automatically check for and install software updates.

• Status: View the status of the battery, network, and other information about your device, including Samsung Legal information.

• Legal information: View legal notices and other legal information, including your embedded Samsung legal information.

• Report diagnostic info: Consent to send diagnostic and usage data about your device to Samsung.

• Device name: View and change your device’s name.

• Additional device information includes the Model number, Android version, Build number, and more.

If have disabled apps, you can choose whether to display them.

1. From a Home screen, tap Apps > Settings.

2. Tap Applications > Application manager.

3. If you have disabled applications:

• Tap All apps at the top left of the screen.

• Tap All apps, Enabled, or Turned off.

4. Tap More options for the following options:

• Show/Hide system apps: Show or hide system (background) apps.

• App permissions: Control which apps have permissions to use certain features of your device.

• Apps that can appear on top: Choose apps that can run on top of other running apps.

• Change system settings: Select which apps can change system endings.

• Reset app preferences: Reset options that have been changed. Existing app data is not deleted.

You can view and update information about an application, including memory usage, default settings, and permissions.

1. From a Home screen, tap Apps > Settings.

2. Tap Applications > Application manager.

3. Tap an application to view and update information about the application. The following options are displayed:

• Uninstall/Disable: Uninstall or disable the application. Preloaded apps can only be disabled.

• Force stop: Stop an app that is misbehaving. Restart your device if stopping an app, process, or service causes your device to stop working correctly.

• Storage: Manage the app’s storage usage.

• Data usage: View mobile data usage.

• Permissions: View permissions granted to the app for access to your device’s information.

• Notifications: Configure notifications from the app.

• Set as default: Set the app as a default for a certain category of apps.

• Battery: View battery usage since the last full charge.

• Memory: View memory usage.

If you have multiple applications of the same type, such as email apps, you can select one app to be the default. You can also use a simpler Home screen which provides an easier user experience for first-time smartphone users.

1. From a Home screen, tap Apps > Settings > Default applications.

2. Tap the following to choose default apps:

• Browser app: Choose a default browser app.

• Calling app: Choose a default calling app.

• Messaging app: Choose a default messaging (text and multimedia) app.

• Set as default: Choose default apps for other functions.

• Home: Choose a Home screen type.

• Device assistance app: Choose an app that provides assistance for using your device.

Shortcuts to the settings for various apps are available in one convenient location.

To quickly access the settings for Calendar, Call, Contacts, Email, Gallery, Internet, Messages, or S Voice:

1. From a Home screen, tap Apps > Settings.

2. Tap one of the following to display the settings for the selected app:

• Calendar

• Call

• Contacts

• Email

• Gallery

• Internet

• Messages

• S Voice

• Google

The World clock lets you keep track of the current time in multiple cities around the globe.

1. From a Home screen, tap Apps > Clock.

2. Tap World clock.

To list a city on the main World clock screen:

1. Tap + Add city and tap a city.

2. Repeat to add more cities.

To remove a city from the main World clock screen:

1. Tap More options > Delete.

2. Tap one or more city entries, and then tap Done.

The Timer provides a countdown timer for up to 99 hours, 59 minutes, and 59 seconds.

1. From a Home screen, tap Apps > Clock.

2. Tap Timer.

3. Use the keypad and tap Hours, Minutes, and Seconds to set the length of the timer. The following options are available:

• Start: Begin the Timer.

• Stop: Pause the Timer.

• Resume: Resume the Timer.

• Reset: Reset the Timer.

The Stopwatch lets you time events down to the hundredth of a second.

1. From a Home screen, tap Apps > Clock.

2. Tap Stopwatch and use the following options:

• Start: Begin timing.

• Stop: Stop timing.

• Lap: Keep track of lap times.

• Resume: Continue timing after stopping the clock.

• Reset: Reset the Stopwatch to zero.

Access your list of contacts by using the Contacts app, which is a shortcut to the Contacts tab.

From a Home screen, tap Apps > Contacts.

You can search for a contact, or swipe the list to find one by name.

1. From a Home screen, tap Apps > Contacts.

2. Tap the Search field, and then enter characters to find contacts that match.

– or –

Tap a letter on the side of the list to jump directly to that letter in the alphabetical list. You can also touch and slide across the alphabetical list to select a letter with better precision.

Use the following procedure to add a new contact.

1. From a Home screen, tap Apps > Contacts.

2. Tap + Create contact, and then tap contact fields to enter information.

• Choose a storage account for the contact. You can store the contact on the device, your SIM card, or sync it with an account.

• Tap + Contact photo to assign a picture to the new contact.

• Enter a name, phone number, email address, and assign the contact to a group. Tap Add another field to add additional contact information.

– Tap + Add to enter additional entries.

– Tap Remove to remove an entry.

– Tap Expand for additional fields.

– Tap Label to choose a label for the field.

3. Tap Save.

When editing a contact, you can tap a field and change or delete the information, or you can add additional fields to the contact’s list of information.

1. From a Home screen, tap Apps > Contacts.

2. Tap the contact to display it, and then tap Edit.

3. Tap any of the fields to add, change, or delete information.

4. Tap Save.

When you share a name card, the contact’s information is sent as a vCard file (.vcf). You can share a vCard using Bluetooth or Wi-Fi Direct, attach it to a message, or save it to a storage location.

1. From a Home screen, tap Apps > Contacts.

2. Tap a contact to display it, and then tap More options > Share name card.

3. Choose a sharing method and follow the prompts.

1. From a Home screen, tap Apps > Contacts.

2. Tap More options > Business cards > + Business card recognition.

3. When the camera opens, center the business card in the guidelines on the screen. If the Camera can recognize the business card, it takes the picture automatically, or you can take the picture manually.

4. Your device analyzes the picture of the business card to create a new contact. You can also add more information to the contact.

5. Tap Save. The business card is displayed as the picture for the contact.

When you have contacts from various sources (Gmail, Facebook, and so on), you may have multiple similar entries for a single contact. Contacts lets you link multiple entries into a single contact.

1. From a Home screen, tap Apps > Contacts.

2. Tap the contact to display it.

3. Tap Linked contact.

4. Tap Link another contact, and then select contacts to link to the original contact.

5. Tap Done.

1. From a Home screen, tap Apps > Contacts.

2. Tap the contact to display it.

3. Tap Linked contact.

4. Tap Separate beside contacts to unlink them from the main contact.

You can delete a single contact or choose multiple contacts to delete.

1. From a Home screen, tap Apps > Contacts.

2. Touch and hold a contact to select it. You can also tap other contacts or tap the Selected checkbox to select all contacts.

3. Tap Delete.

When you mark contacts as favorites, they are easily accessible from other apps. Favorites display together on the Favorites tab in Contacts.

1. From a Home screen, tap Apps > Contacts.

2. Tap a contact to display it, and then tap Add to Favorites (the star turns bright).

1. From a Home screen, tap Apps > Contacts.

2. Tap a contact to display it, and then tap Remove from Favorites (the star turns dim).

You can create a shortcut to a favorite on the Home screen, to access their information directly from the Home screen.

1. From a Home screen, tap Apps > Contacts.

2. Tap Favorites, and then touch and hold a contact to select it.

3. Tap More options > Add shortcut to Home screen. The new shortcut is displayed in an empty area of the Home screen.

You can use groups to organize your contacts. Your device comes with preloaded groups, and you can create your own.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap + Create group.

3. Tap fields to enter information about the group:

• Create group in All accounts: Choose where to save the group. You can save it to a specific account, to the device memory, or to all accounts.

• Group name: Enter a name for the new group.

• Group ringtone, Group message tone, or Group vibration pattern: Customize the sounds for the group.

• Add member: Select contacts to add to the new group and then tap Done.

4. Tap Save.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap a group.

3. Tap More options > Edit group and enter a new name.

4. Tap Save.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap a group.

3. Tap + Add member, and then tap the contacts you want to add.

4. Tap Done.

You can send an email to members of a group.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap a group.

3. Tap More options > Send message or email.

4. Tap either Message or Email.

5. Tap contacts to select them, or tap the selected checkbox at the top of the screen to select all, and then tap Done. Only group members that have phone numbers (Message) or email addresses (Email) in their records are shown.

6. Choose an account and follow the prompts.

Preset groups, such as Family, cannot be deleted.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups.

3. Tap More options > Delete group.

4. Select groups to delete and tap Delete.

5. Chose Group only or Groups and members and tap OK.

These settings allow you to modify settings associated with using the Contacts app.

1. From a Home screen, tap Apps > Contacts.

2. Tap More options > Settings > Contacts.

3. Tap an option and follow the prompts.

From a Home screen, tap Apps > Email.

You can configure Email for most accounts in just a few steps.

1. From a Home screen, tap Apps > Email.

2. Follow the prompts to set up your email account.

To add additional accounts:

1. From a Home screen, tap Apps > Email.

2. Tap Menu > Manage accounts > + Add account.

The device communicates with the appropriate server to set up your account and synchronize your email. When complete, your email is displayed in the Inbox for the account.

Refresh your account to update your email accounts.

1. From a Home screen, tap Apps > Email.

2. Tap Refresh.

You can view email you receive for all accounts on the Combined view screen or you can view email accounts individually.

1. From a Home screen, tap Apps > Email.

2. Tap Menu at the top left of the screen to select:

• Combined view: View all email in a combined inbox.

• [Account Name]: View email for only this account.

This section describes how to create and send an email using the Email app.

1. From a Home screen, tap Apps > Email > Compose.

2. Tap the To field to manually add an email address or tap Add recipient to select a recipient from Contacts or Groups.

• If manually entering recipients, enter additional recipients by separating each entry with a semicolon (;). More recipients can be added at any time before the message is sent.

• If adding a recipient from your Contacts, tap the contact to place a checkmark, and then tap Done. The contact is displayed in the recipients field.

• Tap More to add Cc and Bcc fields.

3. Tap the Subject and Message fields to enter text.

• Tap Attach to add Files, Images, Audio, and more to your email.

• Tap More options for additional email options.

4. Review your message and tap Send.

These settings allow you to modify settings associated with using the Email app.

1. From a Home screen, tap Apps > Email.

2. Tap More options > Settings.

3. Tap an option and follow the prompts.

To remove an Email account:

1. From a Home screen, tap Apps > Email.

2. Tap Menu > Manage accounts.

3. Tap Delete.

4. Tap the accounts you want to delete, and then tap Done.

Samsung Galaxy Apps provides a quick and easy way to find and download free premium apps that are compatible with your Galaxy device.

From a Home screen, tap Apps > Galaxy Apps.

Galaxy Essentials is a collection of specially chosen applications available through Samsung Apps. From Galaxy Essentials, you can access and download a collection of premium content, free of charge.

1. Swipe across the Galaxy Apps screen and then tap Galaxy Essentials.

– or –

Swipe across the Home screens and locate and tap the Galaxy Essentials widget.

2. Follow the prompts to download Galaxy Essentials apps specially chosen from Samsung Apps.

Launching Gallery displays available folders. When another application, such as Email, saves an image, a Download folder is automatically created to contain the image. Likewise, capturing a screenshot automatically creates a Screenshots folder.

1. From a Home screen, tap Apps > Gallery.

2. Tap Menu, and then tap Time or Album to choose the way items display.

• To create a new album, tap Menu > Album, and then tap More options > Create album.

• To launch the Camera app, tap Camera.

• When in Album view, tap an album to open it.

3. Tap an image or video to view it in full screen mode. Swipe left or right to view the next or previous image or video.

Use one of the following methods to zoom in or out on an image:

• Double-tap anywhere on the screen to zoom in or zoom out.

• Spread two fingers apart on any place to zoom in. Pinch the screen to zoom out.

1. From a Home screen, tap Apps > Gallery.

2. Tap a folder to open it.

3. Tap a video to view it. (Note: Videos are indicated by Play icon).

1. Select a video, and then tap Trim.

2. Use the sliders at the bottom of the screen to trim the video. Move the left bracket to the desired starting point, move the right bracket to the desired ending point.

3. Tap Done to save the video.

While viewing an image, tap More options for the following:

• Edit: Use basic tools to edit your picture.

• More info: View image details.

• Studio: Edit your picture with advanced tools.

• Rotate left: Rotate the picture counter-clockwise.

• Rotate right: Rotate the picture clockwise.

• Crop: Resize the frame to crop the image.

• Rename: Rename the file.

• Slideshow: Start a slideshow with the images and videos in the current folder.

• Add tag: Add a tag to your image.

• Set as: Set the image as wallpaper or as a contact’s photo.

• Print: Print the image using a USB or Wi-Fi connection. Some printers may not be compatible with the device.

• Settings: Change the Gallery settings.

Use one of the following methods:

1. From a Home screen, tap Apps > Gallery.

2. Tap a folder to open it.

3. In a folder, tap More options > Select, select images and videos, and then tap Share via to send them to others or share them using social network services.

– or –

When viewing a single image or video, tap Share via to send it to others or share it using social network services.

Tag buddy automatically tags your photos and videos with the date and time it was taken, and optionally adds the location it was taken (if Location Settings are enabled). You can view these tags by tapping More options > More info while viewing the photo or video.

To enable Tag buddy:

1. From a Home screen, tap Apps > Gallery.

2. Tap More options > Settings > Tag buddy.

3. Tap On/Off to turn the feature on.

Face tags allow you to add a contact name to people in your photos. Using face tags lets you filter your photos by people’s names in the Gallery app and other apps which support face tags. While viewing photos, face tags display that identify your contacts. Tap a face tag to call or message the contact.

To use Face tags:

1. From a Home screen, tap Apps > Gallery.

2. Tap an image to view it in full screen mode.

• Whenever possible, the Gallery app identifies faces with a circle. Tap the circle to add a contact’s name.

• To manually add a face tag, touch and hold the photo where you want the tag. Move and crop the box if desired, and tap Save. Select a contact.

• If the contact you select does not currently have a contact photo, you are asked if you would like to use this photo as their contact photo.

To enable Face tags:

1. From a Home screen, tap Apps > Gallery.

2. Tap More options > Settings.

3. Tap Face tag to turn the feature on.

1. From a Home screen, tap Apps > Gallery.

2. Tap a folder to open it.

3. In a folder, tap More options > Delete, select images and videos, and then tap Done.

– or –

When viewing a single image or video, tap Delete.

These settings allow you to modify settings associated with using your Gallery.

1. From a Home screen, tap Apps > Gallery.

2. Tap More options > Settings.

3. Tap an option and follow the prompts.

4. Tap More options > Add account to add a Samsung, Dropbox, Google, or Facebook account.

From a Home screen, tap Apps > Internet.

The following command keys are available:

• < Back or Back: Return to the previous page.

• Forward: Go forward to a recent page.

• Home: Display your Internet Home screen.

• Bookmarks: Manage bookmarked pages, saved pages, and history.

• Tabs: Manage open tabs. The number on the icon indicates the number of tabs that are currently open.

• Refresh: Refresh or reload the current Web page.

To view a web site:

Tap the address field, enter the web address, and then tap Go.

To share, save, or print the current web page:

Tap More.

To zoom in or out:

Tap the screen twice or pinch the screen to zoom out and stretch the screen to zoom in.

Use tabs to view multiple web pages at the same time.

To open a new tab:

Tap Tab manager > New tab.

To close a tab:

1. Tap Tab manager.

2. Tap Close on the tabs you want to close.

To bookmark the current web page:

1. Tap Bookmarks > Add.

2. Type a name for the bookmark and tap Save.

To open a bookmarked web page:

Tap Bookmarks and tap an entry.

To view a list of recently visited web pages:

Tap Bookmarks > History.

To save a web page:

Tap More > Save web page.

To view a list of saved web pages:

Tap Bookmarks > Saved pages.

Tap More > Share and follow the prompts.

Pages viewed in secret mode are not listed in your browser history or search history, and leave no traces (such as cookies) on your device. Secret tabs are a darker shade than the normal tab windows.

To enable Secret mode:

1. From a Home screen, tap Apps > Internet.

2. Tap Tabs.

3. Tap Turn on secret.

4. Tap Create password to protect your Secret mode data with a password.

– or –

Tap Do not use password.

To turn off Secret mode:

1. From a Home screen, tap Apps > Internet.

2. Tap Tabs.

3. Tap Turn off secret.

These settings allow you to modify settings associated with using the Internet app.

1. From a Home screen, tap Apps > Internet.

2. Tap More > Settings.

3. Tap an option and follow the prompts.

You can create memos using the Memo app.

1. From a Home screen, tap Apps > Memo.

2. Tap + Create memo, and type a memo.

• Category: Add or change the category.

• Image: Insert an image into the memo.

• Voice: Use your voice to insert text into the memo.

3. When finished creating your memo, tap Save.

You can browse memos you create.

1. From a Home screen, tap Apps > Memo.

2. Browse memo entries by swiping up or down.

3. To search for a memo, tap Search.

While browsing memo entries, tap More options for the following options:

• Select: Select notes to share, print, or delete.

• Delete: Delete memos.

• Account: Backup your memos to your Samsung account.

You can manage the memos you create.

From a Home screen, tap Apps > Memo.

• To edit a memo, tap it to open it, and then tap the content of the memo.

• To send a memo to others, tap More options > Select, select a memo, and tap Share via.

• To send a memo to a Google or Samsung printer, tap More options > Select, select a memo, and tap More options > Print.

• To delete memos, tap More options > Delete, select memos, and tap Done.

Your default Messaging app provides the following message types:

• Text Messages (SMS)

• Multimedia Messages (MMS)

The Short Message Service (SMS) lets you send and receive text messages to and from other mobile phones or email addresses. The Multimedia Messaging Service (MMS) lets you send and receive multimedia messages (such as picture, video, and audio messages) to and from other mobile phones or email addresses. You may need to subscribe to your service provider’s message service for these features.

This section describes how to create and send a message using the Messaging app.

1. From a Home screen, tap Apps > Messages.

2. Tap Compose.

3. Tap the Enter recipients field to manually enter a recipient or tap Add recipient to select a recipient from your Contacts. You can also select the recipient based on Groups, Favorites, or Logs.

• If adding a recipient from your Contacts, tap the contact to place a checkmark then tap Done. The contact is placed in the recipients field.

• Enter additional recipients by separating each entry with a semicolon (;) and then using the previous procedure. More recipients can be added at any time before the message is sent.

• For the Group option, if the number of recipients is less than 10, all members in the group are added. You must delete any unnecessary members in the list by selecting the trash can icon and deleting unwanted entries.

4. Tap the Enter message field and use the keyboard to enter a message.

5. Tap Add emojis to choose an available emoji from the list and then add it into your message at the cursor location.

6. Review the message and tap Send.

When you receive a new message, a new message icon is displayed on the Status bar.

To view the message:

1. Open the Notification panel and select the message.

– or –

From a Home screen, tap Apps > Messages, and then tap the new message to view it.

2. To play a multimedia message attachment (audio or video), tap Play.

3. To scroll through the list of messages, tap the screen and swipe up or down the page.

To delete messages, follow these steps:

1. From a Home screen, tap Apps > Messages.

2. Tap More options > Select.

3. Tap each message you want to delete or tap the checkbox at the top of the screen to select all messages.

4. Tap Delete. Confirm when prompted.

You can search through your messages by using the Message Search feature.

1. From a Home screen, tap Apps > Messages.

2. Tap Search.

3. Enter a word or phrase to search for, and then tap Search on the keyboard.

Configure the settings for text messages, multimedia messages, push messages, and so on.

1. From a Home screen, tap Apps > Messages.

2. Tap More options > Settings.

This device is designed to receive wireless emergency alerts from the Commercial Mobile Alerting System (CMAS) which may also be known as the Personal Localized Alerting Network (PLAN). Emergency alerts allows customers to receive geographically-targeted messages. Alert messages notify customers of imminent threats to their safety within their area. There is no charge for receiving an Emergency alert message.

There are three types of Emergency alerts:

• Alerts issued by the President

• Alerts involving imminent threats to safety of life (Extreme and Severe)

• AMBER Alerts (missing child alert)

Users may choose not to receive Imminent Threats (Extreme and Severe) and AMBER Alerts. Alerts issued by the President cannot be disabled.

To disable Imminent and AMBER alerts, follow the instructions below:

1. From a Home screen, tap Apps > Messages.

2. Tap More options > Settings > Emergency alerts.

3. Tap Emergency alerts.

• All alerts are enabled by default.

4. Tap an alert option to disable it.

• Change player: Stream the song to another device.

• Volume: Adjust the volume.

• Options: View more options.

• Favorite: Tag this song as a favorite.

• Playback position: Skip to another part of the current song.

• Shuffle mode: Control the order songs are played.

• Time elapsed: View the time elapsed for the current song.

• Playback controls: Change shuffle or repeat modes, fast-forward or rewind, or play or pause the current song.

• Repeat mode: Control playback by setting the repeat mode.

• Song length: View the length of the song.

1. From a Home screen, tap Apps > Music.

2. Tap a category at the top left of the screen to view your music files.

3. Swipe through the list of songs and tap an entry to begin playback.

4. While playing music, use these controls:

• Tap Pause to pause playback. To start playback again, tap Play.

• Tap Rewind to move to the previous song. Touch and hold Rewind to rewind through the song. Tap Fast-forward to move to the next song. Touch and hold Fast-forward to move forward through the song.

• Tap the repeat mode button to control playback. Choose A, Play once to play all songs once, A Repeat all to repeat all songs, or Repeat 1 to repeat the current song.

• Tap the shuffle mode button to control the order songs are played. Choose Shuffle off to play songs in the order they display in the list or Shuffle on to play songs in random order.

Access files stored on your device, including images, videos, songs, and sound clips.

To view files in My Files:

1. From a Home screen, tap Apps > My Files.

2. Tap a category to view the relevant files or folders.

3. Tap a file or folder to open it.

File Groups: Files stored in the device are organized into the following groups:

• Recent files: View recently saved files.

• Images: View image files.

• Videos: View video files.

• Audio: View audio files.

• Documents: View document files.

• Downloaded apps: View downloaded apps.

• Download history: View all apps and files that have been downloaded to the device.

When you add shortcuts folders, Shortcut is displayed on the main My Files screen.

Touch and hold a shortcut Shortcut to rename or delete the shortcut.

For FTP servers or other cloud storage locations, FTP is displayed on the main My Files screen. Touch and hold a shortcut to rename or delete the shortcut (This option is displayed only if you have added shortcuts to the My Files main screen).

To view folder and files located on the device:

Tap Device storage.

To view folders and files located on the memory card (if installed):

Tap SD card.

On the main My Files screen:

1. Tap Search, and then enter search criteria.

2. Tap Storage usage to view memory information for your device and memory card (if installed).

3. Tap More options for these options:

• Add shortcut: Add a shortcut to a folder on the My Files main screen.

• Add FTP server: Add an FTP server shortcut on the My Files main screen.

• Scan for nearby devices: Search for devices that have media sharing activated.

• Settings: Change the settings for viewing files.

After selecting a group:

1. Tap Home to return to the main My Files screen.

2. Tap Search, and then enter search criteria.

3. Tap More options for options:

• Select: Select files or folders.

• Delete: Select and delete files or folders.

• Create folder: Add a folder to the current list. (This option is displayed in Local storage categories only.)

• View as: Change the appearance of the files or folders.

• Sort by: Change the sort order of the files.

• Add shortcut: Add a shortcut to the current location on either a Home screen or the My Files main screen. (This option is displayed in Local storage categories only.)

• Settings: Change the settings for viewing files.

1. Tap a folder to open it.

2. Tap files to select them or tap More options > Select, select files, and then use one of these functions:

• Share via: Send files to others or share them.

• Delete: Delete files or folders.

• More options

– Move: Move files or folders to another folder.

– Copy: Copy files or folders to another folder.

– Rename: Rename a file or folder. This option is displayed only when just one file or folder is selected.

– Add shortcut: Add a shortcut to the folder on the main My Files screen.

– Zip: Create a zip folder containing the selected files. This option is displayed only in Local Storage categories. A selected zip folder has the additional options of Extract and Extract to current folder.

– Details: View details of the selected files or folders.

Use S Health to plan, track, and manage your health goals and activities, including exercise, sleep, and meals.

1. From a Home screen, tap Apps > S Health.

2. Read and accept the terms and conditions.

3. Set up your health profile and goals.

This app can be used to monitor your exercise. While moderate physical activity, such as brisk walking, is safe for most people, health experts suggest that you talk with your doctor before you start an exercise program, particularly if you have any of the following conditions:

• Heart disease;

• Asthma or lung disease;

• Diabetes, or liver or kidney disease;

• Arthritis.

You should also check with your doctor if you have symptoms suggestive of heart, lung, or other serious disease, such as:

• Pain or discomfort in your chest, neck, jaw, or arms during physical activity;

• Dizziness or loss of consciousness;

• Shortness of breath with mild exertion or at rest, or when lying down or going to bed;

• Ankle swelling, especially at night;

• A heart murmur or a rapid or pronounced heartbeat;

• Muscle pain when walking upstairs or up a hill that goes away when you rest.

Finally, the American College of Sports Medicine recommends that you see your doctor before engaging in vigorous exercise if two or more of the following apply:

• You are a man older than age 45 or a woman older than age 55;

• You have a family history of heart disease before age 55;

• You smoke or quit smoking in the past six months;

• You have not exercised for three months or more;

• You are overweight or obese;

• You have high blood pressure or high cholesterol;

• You have impaired glucose tolerance, also called prediabetes.

If you are unsure of your health status, have several health problems, or are pregnant, you should speak with your doctor before starting a new exercise program. Working with your doctor ahead of time is a good way to plan an exercise program that is right and safe for you. Consider it the first step on your path to physical fitness.

Speak commands to perform operations on your device, and to speak criteria for searches and other operations. Use S Voice™ to find everything from directions to trivia answers to the current weather forecast.

You can access S Voice from the Apps list.

1. From a Home screen, tap Apps > S Voice.

2. Speak a command.

3. Tap the microphone icon, if the device does not hear you, or to give it another command.

Tip: Tap More options for example commands and to view a tutorial.

These settings allow you to modify settings associated with using the S Voice app.

1. From a Home screen, tap Apps > S Voice.

2. Tap More options > Settings.

3. Tap an option and follow the prompts.

• Change players: Play the video on nearby devices.

• File name: Display the name of the video file.

• Playback position: Skip to another part of the video.

• Time elapsed: Display the time elapsed for the current video.

• Screen ratio: Change the screen ratio.

• Rewind: Restart the video or skip to a previous video. Touch and hold to rewind the video.

• Pause or Play: Pause or play the current video.

• Volume: Adjust the volume.

• More options: View more options.

• Adjust volume: Drag the slider to adjust volume. Tap Volume to display this option.

• Video length: Display the total length of the video.

• Pop-up: Open the video in the pop-up player window.

• Fast-forward: Skip to the next video. Touch and hold to fast-forward the current video.

Use Video Player to access and play videos stored on your device.

1. From a Home screen, tap Apps > Video.

2. Swipe through the videos stored on your device. After a few seconds, each video thumbnail begins playing a preview of the clip.

3. Tap a video to view it.

Multitask with Pop-up by transforming your video player into a pop-up window. The video continues to play, and the pop-up window can be resized or moved anywhere on the screen.

1. From a Home screen, tap Apps > Video.

2. Tap a video to view it.

3. Tap Pop-up to continue playing the video in a floating window.

• Drag the window to any location on the screen.

• Use two fingers to pinch or spread to resize the floating window.

You can change the size of the video during video playback.

1. From a Home screen, tap Apps > Video.

2. Tap a video to view it.

3. Tap the screen ratio icon to cycle through the screen size options:

• Full-screen in ratio view: The video is enlarged as much as possible without becoming distorted.

• Full-screen view: The entire screen is used, which may cause some minor distortion.

• Original size view: The video is played in its original size.

• Stretch to fit: The video is enlarged to fit the screen without becoming distorted.

Record voice memos and notes.

From a Home screen, tap Apps > Voice Recorder.

• Tap More options > Settings > Recording quality to adjust the recording quality.

• Tap Select mode to choose the appropriate recording mode:

– Normal: This recording mode picks up any sounds detected by the microphones.

– Interview: The top and bottom microphones are used for two-directional recording. The top and bottom of the device pick up equal amounts of sound. Microphones can be muted during recording and playback.

– Conversation: The microphones are sensitive to sound from all directions and can distinguish up to eight sources of sound. Sound sources can be muted during recording and playback.

– Voice memo: Voice input is converted to text on screen. The maximum recording time is five minutes.

• Tap Record to record an audio file.

• Tap Stop to stop recording. The file is automatically saved.

• Tap Pause to pause the recording of an audio file.

• Tap Cancel to cancel the recording of an audio file.

• Tap Bookmark to add a bookmark to the recording.

To display a list of recordings:

1. From a Home screen, tap Apps > Voice Recorder.

2. Tap List.

To search through available recordings:

Tap Search.

To delete one or more voice recordings:

1. Tap Delete.

2. Tap each recording you want to select or tap the selected checkbox at the top of the screen to select all recordings.

3. Tap Done.

To share one or more voice recordings:

1. Tap More options > Select.

2. Tap each recording you want to select or tap the selected checkbox at the top of the screen to select all recordings.

3. Tap Share via, select a sharing method, and follow the prompts.

For additional options, tap More options:

• Select: Choose desired recordings.

• Sort by: Sort the list of recordings.

• Filter by category: Filter entries by category.

• Edit categories: Modify your categories.

• Settings: Configure Voice Recorder.

From a Home screen, tap Apps > Settings.

– or –

From a Home screen, drag down from the Status bar to display the Notification panel, and then tap Settings.

If you are not sure exactly where to find a certain setting, you can use the Setting search feature.

1. From a Home screen, tap Apps > Settings.

2. Tap Search.

• Enter a word or words in the Search box. As you type, settings that match display on the screen.

• Tap an entry to go to that setting.

Quick settings are the settings that you are most likely to frequently use. When you first access the Settings menu, the Quick settings are set to a default list of settings. You can change the Quick settings menu to include your most frequently used settings.

1. From a Home screen, tap Apps > Settings.

2. Tap More options > Edit quick settings.

• Select settings to display in your Quick settings menu. Settings that are checked display in the Quick settings menu.

• Uncheck a setting type to remove it.

3. Tap Done to save your new Quick settings menu.

Settings can be listed in a grid, list, or tab view.

1. From a Home screen, tap Apps > Settings.

2. Tap More options > View as.

3. Select a different view.

Turning Wi-Fi on makes your device able to discover and connect to compatible in-range APs.

1. From a Home screen, tap Apps > Settings.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on or off.

Status bar icons show your current Wi-Fi connection status:

• When Wi-Fi is connected, active, and communicating with a wireless Access Point, Wi-Fi active is displayed in the Status bar.

• If a Wi-Fi access point is available, but your device is not connected to it, Wi-Fi available is displayed in the Status bar. It may also display if there is a communication issue with the target wireless Access Point.

1. From a Home screen, tap Apps > Settings.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.

• When Wi-Fi is first turned on, your device automatically scans for available networks and displays them.

3. Tap the network you want to connect to.

• When you select an open network, you are automatically connected to the network. Otherwise, enter a password to connect.

4. To manually scan for networks, tap More options > Scan.

1. From a Home screen, tap Apps > Settings.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.

3. Swipe to the bottom of the screen and tap Add Wi-Fi network.

4. Enter information about the Wi-Fi network:

• Network SSID: Enter the name of the Wi-Fi network.

• Security: Select a security option and enter your password.

• Show advanced options: Tap if you need to add advanced options such as Proxy settings, IP settings, or Key management.

5. Tap Connect to store the new information and connect to your target Access Point.

The Wi-Fi settings menu allows you to set up many of your device’s advanced Wi-Fi services.

1. From a Home screen, tap Apps > Settings.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.

3. Tap Smart network switch to automatically switch between Wi-Fi and mobile networks to maintain a stable Internet connection.

4. Tap More options for options:

• Scan: Start another scan for nearby Wi-Fi networks.

• Wi-Fi Direct: Configure a Wi-Fi Direct connection with a nearby device.

• Advanced

– Network notification: Receive a notification when new wireless Access Points are available.

– Sort by: Sort Wi-Fi networks by Alphabet or Signal strength.

– Keep Wi-Fi on during sleep: Specify when to disconnect from Wi-Fi.

– Install certificates: Install authentication certificates.

– MAC address: View your device’s MAC address, which is required when connecting to some secured networks (not configurable).

– IP address: View your device’s IP address (not configurable).

• WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or other equipment.

• WPS PIN entry: View the PIN used by your device to set up a PIN-secured connection to a Wi-Fi router or other equipment (not configurable).

• Share Wi-Fi profile: Share Wi-Fi profiles you have created with others.

• Help: Learn about setting up and using Wi-Fi networks, and other settings.

Wi-Fi Direct allows direct device-to-device connections using Wi-Fi, without having to connect to a Wi-Fi network.

1. From a Home screen, tap Apps > Settings.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on. Wi-Fi must be on to configure settings.

3. Tap More options > Wi-Fi Direct. Your device automatically scans for nearby Wi-Fi Direct devices, or you can tap Scan to start scanning.

4. Select a device, and then follow the prompts to complete the connection.

To rename your device (as seen by other devices): Tap More options > Rename device.

To disconnect from a device: Tap End connection.

When your device is connected to another device using Wi-Fi Direct, Wi-Fi Direct is displayed in the Status bar.

Download Booster improves download speed by using both Wi-Fi and LTE networks at the same time when downloading files over 30 MB in size. Note: Download Booster uses mobile data services.

To turn on Download Booster:

1. From a Home screen, tap Apps > Settings.

2. Tap Download booster, and then tap On/Off to turn Download Booster on or off.

1. From a Home screen, tap Apps > Settings.

2. Tap Bluetooth, and then tap On/Off to turn Bluetooth on or off.

When Bluetooth is turned on, Bluetooth is displayed in the Status bar.

When you want to pair with another Bluetooth device, you can scan for nearby devices that are visible.

1. From a Home screen, tap Apps > Settings.

2. Tap Bluetooth, and then tap On/Off to turn Bluetooth on.

• When Bluetooth is first turned on, it scans for nearby Bluetooth devices and displays them.

• To manually perform a new scan, tap Scan.

The Bluetooth pairing process allows you to establish trusted connections between your device and another Bluetooth device. Pairing between two Bluetooth devices is a one-time process. Once a pairing is created, the devices continue to recognize their partnership and exchange information without having to re-enter a passcode.

1. From a Home screen, tap Apps > Settings.

2. Tap Bluetooth, and then tap On/Off to turn Bluetooth on.

• Make sure that the target device is discoverable, so that your device can find it. Refer to the instructions that came with the device to find out how to set it to discoverable mode.

3. Tap the name of the target device when you see it displayed in the Bluetooth devices section.

• Your device automatically tries to pair with the target device. If automatic pairing fails, enter the passcode supplied with the target device.

When you unpair from a Bluetooth device, the two devices no longer recognize each other. To connect again, you have to pair the devices.

1. From a Home screen, tap Apps > Settings.

2. Tap Bluetooth, and then tap On/Off to turn Bluetooth on.

3. Tap Settings next to the paired device, and then tap Unpair to delete the paired device.

Change the name others use when pairing with your device using Bluetooth.

1. From a Home screen, tap Apps > Settings.

2. Tap Bluetooth > More options > Rename device.

3. Tap the device name field and edit your device name.

When you make your device visible, other Bluetooth devices can find it in a scan and initiate pairing. You can choose the length of time your device remains visible.

1. From a Home screen, tap Apps > Settings.

2. Tap Bluetooth, and then tap On/Off to turn Bluetooth on.

3. Tap Bluetooth > More options > Visibility timeout.

4. Select a time period for your device to remain visible after you turn on visibility.

When you receive files from another device using Bluetooth, you can access them from Bluetooth settings.

1. From a Home screen, tap Apps > Settings.

2. Tap Bluetooth > More options > Received files.

Activate Mobile hotspot to allow other devices to use your device’s Internet connection.

1. From a Home screen, tap Apps > Settings.

2. Tap Tethering and mobile hotspot > Mobile hotspot.

3. Tap On/Off to turn the feature on or off.

Control whether devices connect to your Mobile hotspot with the Allowed device list. After you add devices to the list, they can scan for your device and connect using your device’s Mobile hotspot name and password.

1. From a Home screen, tap Apps > Settings.

2. Tap Tethering and mobile hotspot > Mobile hotspot.

3. Tap On/Off to turn the feature on.

4. Tap More options > Allowed devices, and then tap + Add to enter the other device’s Device name and MAC address.

5. Tap OK to add the device.

Use the other device’s Wi-Fi control to connect to your device’s Mobile hotspot.

1. From a Home screen, tap Apps > Settings.

2. Tap Tethering and mobile hotspot > Mobile hotspot.

3. Tap On/Off to turn Mobile hotspot on.

4. Activate Wi-Fi on the target device.

5. Scan for mobile hotspots and select the target device from the list.

6. On the target device, enter your device’s Mobile hotspot password.

1. From a Home screen, tap Apps > Settings.

2. Tap Tethering and mobile hotspot > Mobile hotspot.

3. Tap On/Off to turn the feature on.

4. Tap More options > Configure.

5. Tap the Security field and select WPA2 PSK and enter a new password.

1. From a Home screen, tap Apps > Settings.

2. Tap Tethering and mobile hotspot > Mobile hotspot.

3. Tap On/Off to turn the feature on.

4. Tap More options > Configure:

• Network SSID: View and change the name of your Mobile hotspot.

• Broadcast network name (SSID): Disable to make your Mobile hotspot invisible to other Wi-Fi devices during a scan. Other devices can still connect to your Mobile hotspot, but have to set up the connection manually with your Network SSID and Password.

• Security: Choose the security level for your Mobile hotspot.

• Password: If you choose a security level that uses a password, enter the password.

• Show password: Display your password instead of masking it.

• Show advanced options: Access advanced options, including Broadcast channel, and to specify the channel your device uses for Mobile hotspot.

You can use USB tethering to share your device’s Internet connection with a computer.

1. From a Home screen, tap Apps > Settings.

2. Tap Tethering and mobile hotspot > USB tethering to connect the computer to the device using the USB cable.

Airplane mode disconnects your device from all networks and turns off connectivity features, such as phone calls and Wi-Fi. While in airplane mode, you can use other features, such as playing music, watching videos, and other online applications.

To turn Airplane mode on or off:

1. From a Home screen, tap Apps > Settings.

2. Tap Airplane mode, and then tap On/Off to enable or disable the option.

Note: You can also control Airplane mode from the Device options menu. Press and hold the Power key, and then tap Airplane mode.

Monitor your mobile data usage.

1. From a Home screen, tap Apps > Settings.

2. Tap Data usage for options:

• Mobile data: Enable mobile data. You can also control Mobile Data at the Notification panel.

• Set mobile data limit: Disable your mobile data connection when the specified limit is reached. Drag the red limit line to set the data usage limit.

• Data usage cycle: Tap the drop-down menu, and then choose a time period for data usage. Data usage for the period is displayed on the graph, along with usage by application below.

• Upgrade data service: Explore data plan upgrade options for your rate plan.

3. Tap More options:

• Restrict background data: Restrict some apps and services from working unless you are connected to a Wi-Fi network.

• Show Wi-Fi usage: Display a Wi-Fi tab that shows Wi-Fi usage.

• Mobile HotSpot: Select Wi-Fi networks that are mobile hotspots. You can restrict apps from using these networks, and you can configure apps to warn you before using these networks for large downloads.

• Mobile networks: Add and edit mobile networks.

Some apps, such as Google maps, may require one or more location services be turned on for full functionality.

1. From a Home screen, tap Apps > Settings.

2. Tap Location.

3. Tap On/Off to turn Location services on.

4. Tap Mode to select how your location is determined:

• High accuracy: Use GPS, Wi-Fi, and mobile networks.

• Power saving: Use Wi-Fi and mobile networks (no GPS).

• GPS only: Use GPS only.

5. Tap Improve accuracy to use other connections for determining your location:

• Wi-Fi scanning: Allow apps and services to scan for Wi-Fi networks automatically, even when Wi-Fi is turned off.

• Bluetooth scanning: Allow apps to scan for and connect to nearby devices automatically through Bluetooth, even when Bluetooth is turned off.

Apps that have requested your location are listed under Recent location requests.

1. From a Home screen, tap Apps > Settings.

2. Tap Location.

3. Tap On/Off to turn Location services on.

4. Tap an entry to view the app’s settings.

Google Location History™ stores and uses your device’s most recent location data. Google apps, such as Google Maps, can use this data to improve your search results based on places that you have visited.

1. From a Home screen, tap Apps > Settings.

2. Tap Location.

3. Tap On/Off to turn Location services on.

4. Tap Google Location History and sign in to your Google Account for more options.

You can save your favorite locations for use with services that require location information. This information can improve your search results and other location-related activities.

1. From a Home screen, tap Apps > Settings.

2. Tap Location.

3. Tap On/Off to turn Location services on.

4. Tap My places.

• Tap Add to add more categories.

• Tap a category (Home, Work, or Car) to add a location.

• To delete a custom category, tap More options > Select, tap a category to delete, and then tap Delete.

Note: Home, Work, and Car cannot be deleted.

Scan for nearby devices to connect to and set them up easily. You receive a notification when there are available devices to connect to. Note: This function uses Bluetooth Low Energy scanning even if Bluetooth is turned off on your device.

To enable nearby device scanning:

1. From a Home screen, tap Apps > Settings.

2. Tap More networks > Nearby device scanning.

3. Tap On/Off to enable the feature.

Control your device’s access to networks and mobile data service.

1. From a Home screen, tap Apps > Settings.

2. Tap More networks > Mobile networks for options:

• Mobile data: Allow your device to connect to a mobile data network.

• Data roaming: Allow your device to connect to data services while roaming. Significantly higher charges may result.

• Access Point Names: Select the Access Point Name for mobile connection to the Internet.

• Network mode: Choose a preferred network mode.

• Network operators: Search, select and setup available networks.

Set up and configure Virtual Private Networks (VPNs) on your device. Note: You must set a screen lock PIN or password before setting up a VPN.

Add a VPN

1. From a Home screen, tap Apps > Settings > More networks > VPN.

2. Tap Basic VPN or Advanced IPsec VPN.

3. Follow the prompts to set up your VPN.

Connect to a VPN

1. From a Home screen, tap Apps > Settings > More networks > VPN.

2. Tap Basic VPN or Advanced IPsec VPN.

3. Tap the VPN you want to connect to, enter your log in information, and tap Connect.

Edit or Delete a VPN

1. From a Home screen, tap Apps > Settings > More networks > VPN.

2. Tap Basic VPN or Advanced IPsec VPN.

3. Touch and hold the VPN that you want to edit or delete.

Wi-Fi Calling is an excellent solution for coverage issues in and around the home or wherever cellular coverage is limited.

To configure Wi-Fi Calling:

1. From a Home screen, tap Apps > Settings > More networks.

2. Tap Wi-Fi calling.

3. Tap On/Off to either enable or disable the feature.

4. Tap an option to customize your preferences for calling:

• Wi-Fi preferred: Use Wi-Fi for calls, if possible.

• Cellular network preferred: Use Wi-Fi for calls if the cellular network is unavailable.

• Never use cellular network: Only use Wi-Fi for calls.

5. Tap More options to view a tutorial or top questions about Wi-Fi Calling.

Activate NFC to allow your device to exchange data with other NFC devices.

To activate NFC:

1. From a Home screen, tap Apps > Settings.

2. Tap NFC.

3. Tap On/Off to turn NFC on.

When S Beam is activated, you can beam files to another NFC-capable device by holding the devices close together. You can beam images and videos from your Gallery, music files from your Music app, and more.

1. From a Home screen, tap Apps > Settings.

2. Tap NFC.

3. Tap On/Off to turn NFC on.

4. Tap S Beam.

5. Tap On/Off to turn S Beam on.

6. Touch the back of your device with another NFC-capable device and the content is transferred.

When Android Beam is activated, you can beam app content to another NFC-capable device by holding the devices close together. You can beam browser pages, YouTube videos, contacts, and more.

1. From a Home screen, tap Apps > Settings.

2. Tap NFC.

3. Tap On/Off to turn NFC on.

4. Tap Android Beam.

5. Tap On/Off to turn Android Beam on.

6. Touch the back of your device with another NFC-capable device and the content is transferred.

Tap and pay allows you to select the default payment application you want to use for making purchases on your device.

1. From a Home screen, tap Apps > Settings.

2. Tap NFC.

3. Tap On/Off to turn NFC on.

4. Tap Tap and pay.

5. Select the app that you want as your default.

Share your media files with nearby devices using Wi-Fi, Wi-Fi Direct, or Mobile Hotspot. Warning: If file sharing is enabled, other devices can access your data. Use this option with care.

1. From a Home screen, tap Apps > Settings.

2. Tap Nearby devices.

3. Tap On/Off to enable Nearby devices.

4. Set the following options:

• Content to share: Select the content to share. Choices are: Videos, Photos, and Music.

• Allowed devices: Indicate the devices accessible to your device.

• Denied devices: Indicate devices not allowed access to your device.

• Download to: Allow downloading of data to your device or optional memory card (not included).

• Receive files from other devices: Warn if a device attempts to upload data to your device.

Print images and documents to Samsung printers and other compatible printers (not included).

1. From a Home screen, tap Apps > Settings > Printing.

2. Tap a print service and follow the prompts.

Note: Tap Download plug-in to install additional print service drivers.

Share Your Device’s Screen with Another Device.

1. From a Home screen, tap Apps > Settings > Screen Mirroring.

• Available devices are listed.

2. Tap Scan to find more devices.

3. Tap a device and follow the prompts to connect.

Mirror your device’s display on your car’s entertainment and information screen using a USB connection. To use this feature, your car system must support MirrorLink.

To activate MirrorLink:

1. Connect your device to your car’s system using the USB cable.

2. On your device’s Home screen, tap Apps > Settings > MirrorLink.

3. Tap Connect to vehicle via USB.

4. Tap More options > MirrorLink device ID to view the MirrorLink ID for your device.

Set the system volume level, and set default volume for call ringtones, notifications, and other media. Tip: You can also set System volume from the home screen by pressing the Volume key.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications, and then drag the sliders to set the default volume for:

• Ringtone

• Media

• Notifications

• System

You can switch between sound modes, while preserving the individual sound settings you have made. Tip: Sound modes are also available from the Device options menu. Press and hold the Power key, and then choose Mute, Vibrate, or Sound from the Device options.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Sound mode, and then choose a mode:

• Sound: Your device uses the sounds, vibrations, and volume levels you have chosen in Sound settings for notifications and alerts.

• Vibrate: Your device vibrates for notifications and alerts. This uses the Vibration intensity you choose in Sound settings.

• Mute: Your device plays no sounds or vibrations. Reminders will still occur.

Set the vibration intensity of incoming calls, notifications, and Haptic feedback.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Vibration intensity.

3. Drag the sliders to set the various vibration intensities.

Your device can vibrate in addition to ringing when you receive a call.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Vibrate when ringing to turn the feature on.

Note: This feature is only available when the Sound mode is set to Sound.

Choose from preset ringtones or add your own.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Ringtones.

3. Tap a ringtone to hear a preview, and then tap OK to set it as your default ringtone.

– or –

Tap Add to use an audio file as a ringtone.

Choose a sound for notifications, such as for new messages and event reminders.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Notification ringtone.

3. Tap a sound to preview it, and then tap OK to set it as your default notification sound.

Choose from preset vibration patterns or create your own pattern.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Vibrations.

3. Tap a pattern to preview it, and then tap OK to set it as your default vibration pattern.

Set various other sound options.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Other sounds.

3. Tap the checkbox next to the options under Feedback and Samsung keyboard to indicate whether to enable the sound or vibration.

4. To modify sound settings associated with several frequently used apps, tap one of the following to access the app’s sound settings:

• Call: Configure call notifications and alerts.

• Messages: Configure messaging notifications and alerts.

• Email: Configure email account notifications.

• Calendar: Configure event notifications.

You can set your device to silence all calls and alerts except for times you schedule.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Do not disturb.

3. Tap Turn on now to enable this option.

This option allows you to turn Do not disturb mode on or off automatically at scheduled times. Note: Scheduling is not available if Do not disturb mode has been turned on manually.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Do not disturb.

3. Tap Turn on as scheduled, and set the Days, Start time, and End time.

This option lets you customize which notifications are allowed while your device is in Do not disturb mode.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Do not disturb.

3. Tap Allow exceptions, and tap one of the following options:

• No exceptions

• Alarms only

• Custom

To define how notifications should be displayed on your device’s lock screen:

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Notifications on lock screen and select an option: Show content, Hide content, or Do not show notifications.

To set whether application notifications are displayed:

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Application notifications.

3. Swipe through the list of apps and tap an app.

4. Tap On/Off to block all notifications from this app, to show priority notifications for the selected app, or to hide sensitive content from the selected app.

Prevent applications from reading notifications.

1. From a Home screen, tap Apps > Settings.

2. Tap Sounds and notifications > Notification access.

3. Swipe through the list of apps and tap On/Off to block apps from reading notifications.

Adjust the screen brightness to suit your surroundings or personal preference. You may also want to adjust screen brightness to conserve battery power.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Brightness for options:

• Tap Automatic brightness to allow the device to adjust brightness automatically.

• To set a custom brightness level, clear the Automatic brightness checkmark and drag the Brightness level.

Note: You can also control Brightness from the Notification panel. Drag down the Status bar at the top of the screen to find the Brightness options.

You can set the font style and size for all text that is displayed on the screen.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Font to choose a font style and font size.

• Tap Font style and select a different font. Tap Download to find more fonts.

• Tap Font size and tap a font size.

Use the front camera to rotate the screen based on the orientation of your face.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Screen rotation.

3. Tap On/Off, and then tap Smart rotation to turn the feature on.

Using the front camera to detect your face, the screen does not time out as long as you are facing the screen.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Smart stay to turn the feature on.

Choose how long the display screen remains lit after you tap the screen or press any key.

1. From a Home screen, tap Apps > Settings.

2. Tap Display > Screen timeout, and then choose a time period.