Free English RUSSOUND OB-5.1 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD RUSSOUND OB-5.1 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the all-weather design features of the RUSSOUND OB-5.1?
The RUSSOUND OB-5.1 is designed to withstand extreme outdoor conditions, including rain, snow, saltwater, and UV rays. It features a resonance-free, mineral-filled composite cabinet capable of withstanding temperature fluctuations from -50F to 200F. The unit is constructed with gold-plated binding posts, solid brass and stainless steel hardware, and a rust-proof aluminum grille.
How do I connect the speaker wires to the RUSSOUND OB-5.1?
The RUSSOUND OB-5.1 features color-coded gold-plated binding posts where red is positive and black is negative. These posts are designed to accept either bare wire or banana plugs.
Step 1. Turn off the amplifier prior to making connections to avoid damage from accidental speaker wire shorting.
Step 2. Attach the speaker wires to the terminals, ensuring that the polarity is correct (red to positive, black to negative).
Step 3. Ensure all connections are tight and that no stray strands of wire are touching other terminals, as this can cause a short.
Step 4. Confirm polarity is correct on both speakers to prevent bass response and imaging issues caused by cancellation.
What mounting orientation should be avoided with the RUSSOUND OB-5.1?
Do NOT mount the speaker with the front facing up. This orientation allows water to directly enter the cabinet through the port opening, which may damage the unit.
How do I install the RUSSOUND OB-5.1 using the included standard bracket?
The RUSSOUND OB-5.1 comes with brackets that allow for either vertical or horizontal mounting.
Step 1. Use a level to mount the brackets to ensure correct positioning.
Step 2. Verify that the mounting surface and the fasteners used can safely support the weight of the speaker.
Step 3. Connect the speaker wiring to the terminals while assuring correct polarity.
Step 4. Secure the speaker to the bracket using the supplied knobs.
Step 5. Adjust the speaker for optimum sound and hand-tighten the knobs. Do not use power tools, as they can cause the threaded inserts to break free from the cabinet.
Can I use aftermarket mounting systems with the RUSSOUND OB-5.1?
Yes, the RUSSOUND OB-5.1 includes dual 1/4-20 brass inserts located on the cabinet. These are specifically designed for use with various aftermarket mounting systems. When using these, follow the specific instructions provided with the aftermarket product.
What are the technical specifications for the RUSSOUND OB-5.1?
The following specifications apply to the RUSSOUND OB-5.1 model:
| Woofer | 5″ Long Throw |
| Tweeter | 3/4″ Mylar/Titanium |
| Amplifier Power | 10 – 100 watts |
| Frequency Response | 65Hz – 20kHz |
| Sensitivity | 89dB |
| Nominal Impedance | 8 Ohms |
| Dimensions | 9 5/8″H x 7 1/4″W x 6 1/2″D |
| Weight Each | 5 lbs 1 oz |
CLICK HERE TO DOWNLOAD RUSSOUND OB-5.1 (01) PDF DOCUMENT