Free English ROLAND VERSAUV LEF2-200 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ROLAND VERSAUV LEF2-200 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do regarding retainers not mentioned in the setup guide for the ROLAND VERSAUV LEF2-200?
After removing the retainers mentioned in the setup guide, perform the work outlined in the “Notification Regarding Removing the Retainers”. Store the retainers carefully because they are needed again when transporting the machine, such as for relocation.
How do I properly open the front cover on the ROLAND VERSAUV LEF2-200?
Be sure to hold the handle of the front cover and keep holding it until the cover is completely opened or closed. If you do not open and close the front cover gently, it may break or you may be injured.
How do I open the panel cover on the ROLAND VERSAUV LEF2-200?
To open the panel cover, remove the screw on the top of the panel cover, and then pull out the panel cover in the direction indicated by the arrow.
What is the correct way to push the print-head carriage to the right side on the ROLAND VERSAUV LEF2-200?
Push the print-head carriage until an audible click is heard. When moving the print-head carriage by hand, be sure to hold the specified position to push with your hand. Moving it by holding positions other than that specified may deform and damage the cover.
How should I move the print-head carriage to the retainer removal position on the ROLAND VERSAUV LEF2-200?
Move the print-head carriage by hand to the position indicated in the picture. When moving the print-head carriage by hand, be sure to hold the specified position to hold with your hand. Moving it by holding positions other than that specified may deform and damage the cover.
What are the final steps after positioning the print-head carriage on the ROLAND VERSAUV LEF2-200?
Once the carriage is in position, perform the following steps:
1. Remove the retainers.
2. Close the panel cover.
3. Close the front cover.
CLICK HERE TO DOWNLOAD ROLAND VERSAUV LEF2-200 (02) PDF DOCUMENT