Free English ROLAND VERSAUV LEF-12I (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ROLAND VERSAUV LEF-12I (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do regarding the retainers not mentioned in the setup guide for the ROLAND VERSAUV LEF-12I?
There is a notification regarding how to remove retainers that are not mentioned in the setup guide. After removing the retainers mentioned in the setup guide, perform the necessary work to remove the remaining ones. Store the retainers carefully because they are needed again when transporting the machine, such as for relocation.
How do I properly open the front cover of the ROLAND VERSAUV LEF-12I?
Be sure to hold the handle of the front cover and keep holding it until the cover is completely opened or closed. If you do not open and close the front cover gently, it may break or you may be injured.
What is the procedure for opening the panel cover on the ROLAND VERSAUV LEF-12I?
Remove the screw on the top of the panel cover, and then pull out the panel cover in the direction indicated by the arrow.
How do I push the print-head carriage to the right side on the ROLAND VERSAUV LEF-12I?
Push the print-head carriage until an audible click is heard. When moving the print-head carriage by hand, be sure to hold the specified position (the position to push with your hand). CAUTION: Moving it by holding positions other than that specified may deform and damage the cover.
How should I move the print-head carriage to remove the retainers on the ROLAND VERSAUV LEF-12I?
Move the print-head carriage by hand to the position indicated for retainer removal. When moving the print-head carriage by hand, be sure to hold the specified position (the position to hold with your hand). CAUTION: Moving it by holding positions other than that specified may deform and damage the cover. Once positioned, remove the retainers.
What steps should be taken after removing the retainers from the ROLAND VERSAUV LEF-12I?
After removing the retainers, first close the panel cover. Finally, close the front cover.
CLICK HERE TO DOWNLOAD ROLAND VERSAUV LEF-12I (01) PDF DOCUMENT