Free English RILEY PT-7-3A-AEU (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD RILEY PT-7-3A-AEU (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I assemble my RILEY PT-7-3A-AEU?
1. Open the product carton.
2. Turn the product over and place it on a flat surface.
3. Unclasp the locks, disassemble the product, and then assemble the product according to the installation instructions provided.
How should I handle the top rail of the RILEY PT-7-3A-AEU?
To avoid any damage to your RILEY PT-7-3A-AEU, do not handle the top rail by lifting or pulling on it in an unsupported manner. Please move the top rail only by following the recommended movement procedures shown in the instructions to ensure structural integrity.
What are the safety precautions when turning over the RILEY PT-7-3A-AEU?
For your safety, please follow these guidelines:
1. Two adults are recommended to turn the RILEY PT-7-3A-AEU over.
2. Take hold of the cabinet of the table.
3. Do not hold the legs of the table while turning it.
4. Turn the table over carefully.
5. Do not lean the table on its legs while positioning it.
6. Place the table on all four feet at the same time on the ground.
What is the required position for the clasps on the RILEY PT-7-3A-AEU?
Please note that the clasps must be in the upright position before loading the slate onto the RILEY PT-7-3A-AEU.
What is the warning regarding the use of the RILEY PT-7-3A-AEU?
The RILEY PT-7-3A-AEU is not a toy and should be used under adult supervision only.
CLICK HERE TO DOWNLOAD RILEY PT-7-3A-AEU (01) PDF DOCUMENT