FREE ENGLISH PYLE PLMRWB65LEB (01) PDF USER GUIDE

FREE ENGLISH PYLE PLMRWB65LEB (01) PDF USER MANUAL

FREE ENGLISH PYLE PLMRWB65LEB (01) PDF OWNER GUIDE

FREE ENGLISH PYLE PLMRWB65LEB (01) PDF OWNER MANUAL

FREE ENGLISH PYLE PLMRWB65LEB (01) PDF REFERENCE GUIDE

FREE ENGLISH PYLE PLMRWB65LEB (01) PDF INSTRUCTION GUIDE

FREE ENGLISH PYLE PLMRWB65LEB (01) PDF REFERENCE MANUAL

FREE ENGLISH PYLE PLMRWB65LEB (01) PDF INSTRUCTION MANUAL

FREE ENGLISH PYLE PLMRWB65LEB (01) PDF OPERATING INSTRUCTIONS


CLICK HERE TO DOWNLOAD PYLE PLMRWB65LEB (01) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

PYLE PLMRWB65LEB (01) PDF SUMMARY:

What are the features of the marine speaker model PLMRWB65LEW/PLMRWB65LEB?

The features include:

  • Long Excursion Woofer
  • 2-Way Mini Box Speaker System
  • 1.0”Titanium Dome Tweeter
  • Heavy Duty ABS Construction
  • Quick Connect Speaker Terminals
  • Max Power 200 Watts
  • Magnet 10 Oz
  • 6.5”
  • Frequency Response 40Hz-20KHz
  • Impedance 4 Ohms
  • Sensitivity 90 dB
  • Dimensions(mm) 217x217x230 mm (HxWxD)

What are the features of the marine speaker model PLMRWB85LEW/PLMRWB85LEB?

The features include:

  • Long Excursion Woofer
  • 2-Way Mini Box Speaker System
  • 1.0”Titanium Dome Tweeter
  • Heavy Duty ABS Construction
  • Quick Connect Speaker Terminals
  • Max Power 260 Watts
  • Magnet 20 Oz
  • 8”
  • Frequency Response 30Hz-20KHz
  • Impedance 4 Ohms
  • Sensitivity 91 dB
  • Dimensions(mm) 252x252x245 mm (HxWxD)

How do I turn on the LEDs or switch to standby mode using the remote control?

Press the Turn On/Standby button to turn on the LEDs or switch to standby mode.


How do I switch from dynamic mode to color mode or switch between dynamic modes using the remote control?

Press the Dynamic Mode button to switch from dynamic mode to color mode or switch between dynamic modes.


How do I adjust the dynamic mode speed using the remote control?

Use the Dynamic Mode Speed buttons to adjust the dynamic mode speed. If the unit is in static mode, pressing these buttons will switch the unit to dynamic mode.


How do I switch between static colors using the remote control?

Use the Static Color Adjust buttons to switch between static colors. Pressing these keys while in dynamic mode will switch the unit to static mode.


How do I adjust brightness while in static mode using the remote control?

Press the Brightness Adjust buttons to adjust brightness while in static mode. If these buttons are pressed while in dynamic mode, it will switch to static mode.


How do I switch the unit into demo mode using the remote control?

Press the Demo Mode button to switch the unit into demo mode. While in demo mode, the unit will loop through 9 of the dynamic modes, with each repeating 3 times.


What should I remember when using the remote unit?

Remember to remove the plastic insulator from the remote unit battery compartment.


What type of battery does the remote use?

The remote uses a 3 volt CR2025 type battery. When replacing, be sure to use only the same type of battery.


Can the remote signal pass through obstacles?

The remote signal can pass through most obstacles.


Where should I avoid installing the unit?

Do not install the unit in areas surrounded by metal, as the remote signal will not reach.

CLICK HERE TO DOWNLOAD PYLE PLMRWB65LEB (01) PDF MANUAL


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.