PRO-JECT A1 (01) PDF Document

Free English PRO-JECT A1 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD PRO-JECT A1 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

What should I do if my PRO-JECT A1 record player was damaged in transit?

Your PRO-JECT A1 turntable was shipped partially disassembled to avoid damage to sensitive parts. Please check immediately to make sure that neither the packaging nor the device was damaged in transit. If you are missing parts or if the unit is damaged, please do not operate it and contact your dealer.

What are the essential safety instructions for the power supply of the PRO-JECT A1?

The power supply is used to connect and disconnect the PRO-JECT A1 unit from the mains. Make sure that the plug is easily accessible at all times. Hold the plug when unplugging the power cord. Never handle the power cord while your hands are wet or damp.

What precautions should I take regarding liquids and flames near the PRO-JECT A1?

Avoid letting liquids enter the PRO-JECT A1 device. Never place any item containing liquid, like a flower vase, on or near the device. Never spill any liquid on the device. Never place any naked flame sources, like lighted candles, on or near the device. The product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.

What should be done with plastic bags included with the PRO-JECT A1 packaging?

Keep plastic bags away from children to prevent any risk of suffocation.

What are the components included in the packaging for the PRO-JECT A1?

The items in the packaging are:

a TURNTABLE

a.1/a.2 FIXED RCA CABLE (a.1) WITH EARTHING WIRE (a.2)

b FELTMAT

c DUSTCOVER

d SINGLES ADAPTER

e POWER SUPPLY

f DUSTCOVER HINGES

g PLATTER PROTECTION CARDBOARD

h TONEARM TWIST TIE

i STYLUS PROTECTION COVER

j SETUP GUIDE AND TRANSLATION MATRIX (not pictured below)

What are the numbered controls, features, and connections on the PRO-JECT A1?

The controls, features and connections are:

1 PLATTER

2 CHASSIS

3 FIXED COUNTERWEIGHT

4 TONEARM TUBE

5 HEADSHELL WITH FINGER LIFT AND PRE-MOUNTED ORTOFON CARTRIDGE

6 TONEARM REST / REMOVABLE TRANSPORT TWIST TIE

7 REPLAY SPEED LEVER

8 TONEARM LIFT LEVER

9 START/STOP LEVER

10 PHONO PREAMP ON/OFF SWITCH

11 DUSTCOVER HINGE HOLDERS

12 FELTMAT

13 RCA CABLE WITH EARTHING WIRE

14 POWER SUPPLY SOCKET

How do I unpack and set up the PRO-JECT A1 turntable?

Unpack the turntable (a) and place it on a level surface. Remove the platter protection (g) and the tonearm twist tie (h). Install the dustcover hinges (f) in the dustcover (b) and slide it into the turntable hinge holders (11). Plug the power supply (e) first into the power socket on the turntable (14) and then into your mains power.