POYOCOM TL6001 (01) PDF Document

The following table outlines which parts are included with specific models of the POYOCOM TL6001:

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions.

2. To protect against risk of electrical shock, do not put the motor body of cordless hand blender, charger adapter, cord, or electrical plug in water or other liquid.

3. The appliance should not be used by children and special care should be taken when used near children.

4. Turn the appliance off before assembling and disassembling parts. Turn the appliance off and separate the accessories from the motor body before cleaning. To unplug the charger, grasp the plug and pull from the outlet. Never pull from the power cord.

5. Avoid contacting moving part.

6. Do not operate any appliance or charger adapter with a damage cord or plug or after the appliance malfunctions, or is dropped or damage in any manner.

7. The use of attachment not recommended or sold by us may cause fire, electric shock or injury.

8. Do not use the appliance outdoors.

9. Do not let cord hang over edge of table and counter.

10. Do not let cord contact hot surfaces, including the stove.

11. Keeps hands and utensils out of the container while blending to prevent the possibility of severe injury to persons or damages to the unit. A Scraper may be used but must be used only when the unit is not running.

12. Blades are sharp. Handle carefully.

13. When mixing liquids, especially hot liquids, use a tall container or make small quantities at a time to reduce spillage.

14. To reduce the risk of injury, never place cutting blade on base without first putting bowl properly in place.

15. Be certain cover is securely locked in place before operating appliance.

16. Do not use an extension cord. Plug charger directly into an electric outlet.

17. Do not use a charger that has not passed safety certification to charge the product. Doing so may cause overheating, burning or explosion, resulting in personal injury and property damage.

18. Do not incinerate this appliance even if it is severely damaged. The battery can explode in a fire.

19. Keep hands and utensils away from the cutting blade while chopping food to reduce the risk of severe injury to persons or damage to the food chopper. A scraper may be used but only when the food chopper is not running.

20. Do not operate the appliance while charging.

21. Refer to the “care and cleaning section” for instructions on cleaning the surfaces in contact with food.

22. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.

23. Never add to container while appliance is operating.

24. Container must be properly in place before operating appliance.

25. Do not fill the bowl above the maximum fill line or maximum marked capacity to avoid risk of injury due to damage to the cover or bowl.

Before first use, follow these steps:

1. Charge the battery until the battery status indicator turns solid green.

2. Clean all the parts and accessories (see Care and Cleaning section).

3. Remove all the packaging materials if present.

1. In order to charge the battery, open the Charging port protective cover.

2. Insert the charging cable pin into the charging port.

3. Plug your own charger adapter into a grounded electrical outlet.

4. The battery status indicators pulse when it charges. It will be fully charged in 3.5 hours and all the 4 battery status indicators turn solid green.

Note: While the appliance is charging, an auto-lock procedure is enabled to prevent operation.

Processing settings are approximate. Actual setting may vary depending on quality of food and desired blending results.

Important: Make sure that the variable speed controller is not pressed before attaching or removing parts of accessories.

When using the appliance, please tap the power unlock button first, then the Variable speed controller can be activated within 5 seconds.

1. Insert the cordless hand blender into the mixture. Press the variable speed controller to start. Put your free hand to cover the top of the blender jar for better stability and to avoid splashing. Note: Do not immerse Motor body into liquids or other mixtures.

2. Use the draw up motion with the cordless hand blender to move the ingredients within the jar. Slowly draw it upwards against the side of the jar. Repeat the process until the ingredients are at the desired consistency.

Use the chopper to cut and chop beef, onion, garlic, cheese, carrots, nuts, etc.

1. Insert the chopper blade into chopper bowl. Add ingredients into the bowl. For the best results, cut the food items into 3/4” (2cm) pieces.

2. Place the chopper bowl lid on the chopper bowl and twist to lock until it clicks. Insert the motor body into the chopper bowl lid and twist to lock.

3. Tap the power unlock button first then press the variable speed controller within 5 seconds to start. For best results, pulse the power by pressing and releasing the variable speed controller until ingredients reach the desired consistency.

4. When the chopping is complete, release the variable speed controller. Then rotate the motor body to unlock from the chopper lid. Be sure to open the chopper lid after removing the motor body.

Warning: Cut Hazard. Handle Blades Carefully. Failure to do so can result in cuts. Always place the chopper on a flat surface.

Use the whisk to whip cream, beat egg whites, mix instant puddings, vinaigrettes, mousse or for make mayonnaise.

1. Insert the whisk into whisk adapter until it locks in place. Insert the whisk accessory into the motor body and twist to lock until it clicks.

2. Insert the cordless hand blender into the mixture. Tap the power unlock button first, Then press the variable speed controller within 5 seconds to start.

Note: Do not immerse motor body into liquids or other mixtures.

Tip: The stainless steel whisk may scratch or mark non-stick coating, avoid using the whisk with non-stick cookware.

Note: After whisking is complete, release the variable speed controller, then remove cordless hand blender from mixture.

Important: Make sure that the variable speed controller is not pressed before assembling or removing parts of accessories.

1. Remove the blending arm, whisk or chopper accessory before cleaning.

2. Dishwasher safe parts-top rack only: whisk, Chopper bowl, chopper blade, blender jar. Wash blender arm, chopper attachment and whisk adapter in hot soapy water.

3. Wipe the motor body with a damp cloth, mild dish soap may be used, but do not use abrasive cleaners.

Warning: Cut Hazard. Handle Blades Carefully. Failure to do so can result in cuts.