FREE ENGLISH POWERWERKS PWR12 (01) PDF USER GUIDE
FREE ENGLISH POWERWERKS PWR12 (01) PDF USER MANUAL
FREE ENGLISH POWERWERKS PWR12 (01) PDF OWNER GUIDE
FREE ENGLISH POWERWERKS PWR12 (01) PDF OWNER MANUAL
FREE ENGLISH POWERWERKS PWR12 (01) PDF REFERENCE GUIDE
FREE ENGLISH POWERWERKS PWR12 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH POWERWERKS PWR12 (01) PDF REFERENCE MANUAL
FREE ENGLISH POWERWERKS PWR12 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH POWERWERKS PWR12 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD POWERWERKS PWR12 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I set up the speaker for initial use?
Prior to switching on, turn volume down to minimum.
Connect the audio source to the appropriate Input socket.
Connect to the mains supply.
Switch on the audio source, followed by the active speaker.
Set the volume with the applicable control.
Adjust the bass + treble.
How do I pair a Bluetooth device with the speaker?
Press and hold the PAIR button until light flashes quickly.
Pairing connection can now be made via Bluetooth® on devices such as smart phones and tablets.
How do I temporarily bypass a Bluetooth® connection?
To temporarily bypass Bluetooth® connection press PAIR button once until light flashes slowly. Press again once to reconnect.
How do I exit or disable Bluetooth®?
To exit/disable Bluetooth® press and hold PAIR button until light turns off.
What safety reminders or operational tips should I follow for the speaker?
Intended for Indoor or protected from weather use only.
Do not place near open flame.
Make sure unit is stable. Place on a flat surface or an appropriate speaker stand with wide footprint able to hold 25 lbs. or greater.
Do not place liquids on top of unit or subject to high humidity.
No user serviceable parts inside. Always refer to a qualified repair service when service is required.
Mind the system Clip Indicator. Keeping the volume to a level that keeps the Clip Indicator only blinking when a large amount of bass is present will deliver a better listening experience and prolong the life of the unit.
What should I do if the equipment causes harmful interference to radio or television reception?
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
What separation distance should be maintained for FCC / IC RF exposure requirements?
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.
CLICK HERE TO DOWNLOAD POWERWERKS PWR12 (01) PDF MANUAL