Free English PIONEER DEH-P3000IB (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PIONEER DEH-P3000IB (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I remove the front panel of the PIONEER DEH-P3000IB?
1. Press DETACH to release the front panel.
2. Grab the front panel and remove.
How do I attach the front panel of the PIONEER DEH-P3000IB?
1. Slide the front panel to the left until it clicks. The front panel and the head unit are jointed on the left side. Make sure that the front panel has been jointed to the head unit.
2. Press the right side of the front panel until it is firmly seated.
How do I install the battery in the remote control for the PIONEER DEH-P3000IB?
1. Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (-) poles aligned properly.
2. When using for the first time, pull out the film protruding from the tray.
Caution: Use one CR2025 (3 V) lithium battery.
How do I turn the PIONEER DEH-P3000IB on and off?
To turn the unit on: Press SRC.
To turn the unit off: Press OFF and hold until the unit turns off.
How do I select a source on the PIONEER DEH-P3000IB?
Press SRC repeatedly to switch between the following sources:
XM TUNER (XM tuner)
SIRIUS (SIRIUS tuner)
TUNER (tuner)
TELEVISION (television)
COMPACT DISC (built-in CD player)
MULTI CD (multi-CD player)
IPOD (iPod)
USB (USB)
EXTERNAL (external unit 1)
EXTERNAL (external unit 2)
AUX1 (AUX1)
AUX2 (AUX2)
BT AUDIO (BT audio)
TELEPHONE (BT telephone)
How do I adjust the volume on the PIONEER DEH-P3000IB?
Turn MULTI-CONTROL to adjust the sound level.
How do I perform basic tuner operations on the PIONEER DEH-P3000IB?
Select a band: Press BAND. Band can be selected from among FM1, FM2, FM3 or AM.
Manual tuning (step by step): Push MULTI-CONTROL left or right.
Seek tuning: Push and hold MULTI-CONTROL left or right for about one second and release.
How do I store and recall broadcast frequencies on the PIONEER DEH-P3000IB?
1. Press LIST. The Preset screen is displayed.
2. Use MULTI-CONTROL to store the selected frequency in memory. Turn to change the preset number. Press and hold to store. You can also store the frequency in memory by pushing and holding MULTI-CONTROL right.
3. Use MULTI-CONTROL to select the desired station. Turn to change the station. Press to select. You can also change the station by pushing MULTI-CONTROL up or down.
How do I store the strongest broadcast frequencies automatically (BSM) on the PIONEER DEH-P3000IB?
1. Press MULTI-CONTROL to display the main menu.
2. Use MULTI-CONTROL to select FUNCTION.
3. Turn MULTI-CONTROL to select BSM (best stations memory).
4. Press MULTI-CONTROL to turn BSM on. The six strongest broadcast frequencies are stored in the order of their signal strength. To cancel, press MULTI-CONTROL again.
How do I tune in to strong signals using Local Seek Tuning on the PIONEER DEH-P3000IB?
Press LOCAL repeatedly to select the desired setting.
FM: OFF – LEVEL 1 – LEVEL 2 – LEVEL 3 – LEVEL 4
AM: OFF – LEVEL 1 – LEVEL 2
The LEVEL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.
How do I operate the built-in CD player on the PIONEER DEH-P3000IB?
Insert a disc: Insert a disc into the disc loading slot. Playback will automatically start.
Eject a disc: Press EJECT.
Select a folder: Push MULTI-CONTROL up or down.
Select a track: Push MULTI-CONTROL left or right.
Fast forward or reverse: Push and hold MULTI-CONTROL left or right for about one second and release.
Return to root folder: Press and hold BAND.
How do I select tracks from the track title list or file name list on the PIONEER DEH-P3000IB?
Track Title List:
1. Press LIST to switch to the track title list mode.
2. Use MULTI-CONTROL to select the desired track title. Turn to change the track title. Press to play.
File Name List:
1. Press LIST to switch to the file name list mode.
2. Use MULTI-CONTROL to select the desired file name (or folder name). Turn to change the name of file or folder.
– When a file is selected, press to play.
– When a folder is selected, press to see a list of files (or folders) in the selected folder.
– When a folder is selected, press and hold to play a song in the selected folder.
How do I set the repeat play range on the PIONEER DEH-P3000IB?
Press RPT repeatedly to select the desired setting:
– DISC: Repeat all tracks
– TRACK: Repeat the current track
– FOLDER: Repeat the current folder
How do I play tracks in random order on the PIONEER DEH-P3000IB?
Press RDM to turn random play on. Tracks in a selected repeat range are played in random order. To turn random play off, press RDM again.
How do I scan folders and tracks on the PIONEER DEH-P3000IB?
1. Press MULTI-CONTROL to display the main menu and select FUNCTION.
2. Turn MULTI-CONTROL to select SCAN.
3. Press MULTI-CONTROL to turn scan play on. The first 10 seconds of each track is played.
4. When you find the desired track, press MULTI-CONTROL to turn scan play off.
How do I perform basic iPod operations on the PIONEER DEH-P3000IB?
Fast forward or reverse: Push and hold MULTI-CONTROL left or right for about one second and release.
Select a track (chapter): Push MULTI-CONTROL left or right.
How do I browse for a song on an iPod connected to the PIONEER DEH-P3000IB?
1. Press LIST to switch to the top menu of the list search.
2. Use MULTI-CONTROL to select a category (PLAYLISTS, ARTISTS, ALBUMS, SONGS, PODCASTS, GENRES, COMPOSERS, AUDIOBOOKS).
3. Turn to change the category; press to select.
4. Repeat step 3 to find a song you want to listen to.
How do I play iPod songs in a random order (shuffle) on the PIONEER DEH-P3000IB?
1. Use MULTI-CONTROL to select SHUFFLE in the FUNCTION menu.
2. Press MULTI-CONTROL to display the setting mode.
3. Use MULTI-CONTROL to select the desired setting:
– SONGS: Play back songs in the selected list in random order.
– ALBUMS: Play back songs from a randomly selected album in order.
– OFF: Cancel random play.
To shuffle all songs: Press the RDM/shuffle button on the head unit to turn shuffle all on.
How do I adjust the audio balance/fader on the PIONEER DEH-P3000IB?
1. Use MULTI-CONTROL to select AUDIO in the main menu.
2. Select FADER/BALANCE.
3. Press MULTI-CONTROL to display the setting mode.
4. Press MULTI-CONTROL to select the segment you wish to set (Fader or Balance).
5. Turn MULTI-CONTROL to adjust speaker balance.
– Front/rear speaker balance can be adjusted between FAD F15 and FAD R15.
– Left/right speaker balance can be adjusted between BAL L15 and BAL R15.
How do I use the equalizer on the PIONEER DEH-P3000IB?
Recalling Equalizer Curves:
1. Use MULTI-CONTROL to select AUDIO in the main menu.
2. Select PRESET EQUALIZER.
3. Press MULTI-CONTROL to display the setting mode.
4. Turn MULTI-CONTROL to select the equalizer (POWERFUL, NATURAL, VOCAL, CUSTOM, FLAT, SUPER BASS).
Adjusting Equalizer Curves (EQ SETTING 1):
1. Select EQ SETTING 1.
2. Press MULTI-CONTROL to select the segment (L, M, H).
3. Turn MULTI-CONTROL to adjust the level (+6 to -6).
How do I adjust the subwoofer settings on the PIONEER DEH-P3000IB?
Turning Subwoofer On/Off (SW SETTING 1):
1. Press SW to display the subwoofer setting mode.
2. Select SW SETTING 1.
3. Turn MULTI-CONTROL to select the desired setting: NORMAL (normal phase), REV (reverse phase), or OFF (subwoofer off).
Adjusting Subwoofer Settings (SW SETTING 2):
1. Select SW SETTING 2 setting mode.
2. Press MULTI-CONTROL to select the segment you wish to set (Cut off frequency or Level).
3. Turn MULTI-CONTROL to adjust the selected segment.
– Cut off frequency: 50HZ, 63HZ, 80HZ, 100HZ, 125HZ.
– Level: +6 to -24.
How do I set the clock on the PIONEER DEH-P3000IB?
1. Press OFF and hold until the unit turns off.
2. Press MULTI-CONTROL and hold until CLOCK SET appears in the display.
3. Use MULTI-CONTROL to select CLOCK SET.
4. Press MULTI-CONTROL to display the setting mode.
5. Press MULTI-CONTROL to select the segment of the clock display you wish to set (Hour or Minute).
6. Turn MULTI-CONTROL to put the clock right.
How do I switch the auxiliary setting on the PIONEER DEH-P3000IB?
1. Press OFF and hold until the unit turns off.
2. Press MULTI-CONTROL and hold until CLOCK SET appears.
3. Turn MULTI-CONTROL to select AUX1 or AUX2.
4. Press MULTI-CONTROL to turn AUX1/AUX2 on. To turn AUX off, press MULTI-CONTROL again.
How do I set the rear output and subwoofer controller on the PIONEER DEH-P3000IB?
1. In the initial settings menu, use MULTI-CONTROL to select SW CONTROL.
2. Press MULTI-CONTROL to display the setting mode.
3. Press MULTI-CONTROL to select the segment you wish to set: REAR SP (rear speaker setting) or PREOUT (RCA output setting).
4. Use MULTI-CONTROL to select the desired setting:
– For REAR SP: REAR SP:SUB W (subwoofer) or REAR SP:FULL (full-range speaker).
– For PREOUT: PREOUT:SUB W (subwoofer) or PREOUT:REAR (full-range speaker).
How do I turn the clock display on or off on the PIONEER DEH-P3000IB?
Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off.
How do I operate the USB portable audio player with the PIONEER DEH-P3000IB?
Select a folder: Push MULTI-CONTROL up or down.
Fast forward or reverse: Push and hold MULTI-CONTROL left or right for about one second and release.
Select a track: Push MULTI-CONTROL left or right.
Return to root folder: Press and hold BAND.
How do I connect a Bluetooth audio player to the PIONEER DEH-P3000IB?
1. Use MULTI-CONTROL to select CONNECTION OPEN in the function menu.
2. Press MULTI-CONTROL to open the connection. ALWAYS WAITING is displayed. If your Bluetooth audio player is set ready for connection, it will automatically establish.
How do I connect a cellular phone via Bluetooth to the PIONEER DEH-P3000IB?
1. Use MULTI-CONTROL to select SEARCH PHONE in the function menu.
2. Press MULTI-CONTROL to search for available cellular phones.
3. Turn MULTI-CONTROL to select a device name you want to connect.
4. Press MULTI-CONTROL to connect the selected cellular phone. While connecting, CONNECTING flashes. To complete, check the device name (PIONEER BT UNIT) and enter the link code on your cellular phone (default is 0000).
How do I clear memory for Bluetooth phone on the PIONEER DEH-P3000IB?
1. Use MULTI-CONTROL to select CLEAR MEMORY in the function menu.
2. Press MULTI-CONTROL to display the setting mode.
3. Turn MULTI-CONTROL to select an item (PHONE BOOK, ALL, RECEIVED, DIALLED, MISSED).
4. Press MULTI-CONTROL to determine the item that you want to delete.
5. Turn MULTI-CONTROL to select CLEAR MEMORY: YES.
6. Press MULTI-CONTROL to clear the memory.
What are the error messages and troubleshooting steps for the PIONEER DEH-P3000IB?
| Message | Cause | Action |
|---|---|---|
| ERROR-11, 12, 17, 30 | Dirty disc | Clean disc. |
| ERROR-11, 12, 17, 30 | Scratched disc | Replace disc. |
| ERROR-10, 11, 12, 15, 17, 30, A0 | Electrical or mechanical | Switch the ignition key, or switch to a different source, then back to the CD player. |
| ERROR-15 | The inserted disc does not contain any data | Replace disc. |
| ERROR-22, 23 | The CD format cannot be played back | Replace disc. |
| NO AUDIO | The inserted disc does not contain any files that can be played back | Replace disc. |
| TRK SKIPPED | The inserted disc contains WMA files that are protected by DRM | Replace disc. |
| PROTECT | All the files on the inserted disc are secured by DRM | Replace disc. |
| HEAT | The temperature of this unit is outside the normal operating range | Wait until the unit’s temperature returns to within normal operating limits. |
| ERROR-11 (iPod) | Communication failure | Disconnect the cable from iPod. Once iPod main menu is displayed, connect the cable again. Reset the iPod. |
| ERROR-21 (iPod) | Old version of iPod | Update the iPod version. |
| ERROR-30 (iPod) | iPod failure | Reset the iPod. |
| ERROR-A0 (iPod) | iPod is not charged but operates correctly | Check if the connection cable for iPod shorted out (e.g., not caught in metal objects). After checking, switch the ignition key or disconnect the iPod and connect again. |
| NO SONGS (iPod) | No songs | Transfer the songs to iPod. |
| STOP (iPod) | No songs in the current list | Select a list that contains the songs. |
CLICK HERE TO DOWNLOAD PIONEER DEH-P3000IB (01) PDF DOCUMENT