Free English OLIGHT BALDR MINI (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD OLIGHT BALDR MINI (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I adjust the position of the OLIGHT BALDR MINI?
You can adjust the position of the OLIGHT BALDR MINI by sliding the light to the desired position along the rail after loosening the screw.
How do I charge the OLIGHT BALDR MINI?
Connect the USB end of the charging cable to an external USB power source, then attach the other end of the magnetic charging cable to the charging port of the OLIGHT BALDR MINI. The red indicator light means it is charging, while green indicates the charging is complete.
What does the indicator light color mean on the OLIGHT BALDR MINI?
A red indicator light signifies that the OLIGHT BALDR MINI is charging, while a green indicator light signifies that charging is complete.
How do I turn the OLIGHT BALDR MINI on or off?
The OLIGHT BALDR MINI can be turned on or off by clicking either side switch.
What are the light settings available on the OLIGHT BALDR MINI?
The OLIGHT BALDR MINI features three light settings: Light, Light and Green Beam, and Green Beam. You can toggle between these using the light setting switch.
How do I perform momentary on with the OLIGHT BALDR MINI?
Push and hold down either side switch of the OLIGHT BALDR MINI to activate momentary on. The light will turn off when the switch is released.
How do I perform constant on with the OLIGHT BALDR MINI?
Single click either side switch of the OLIGHT BALDR MINI to turn it on constantly. Single click again to turn it off.
What are the specifications of the OLIGHT BALDR MINI?
The technical specifications of the OLIGHT BALDR MINI are as follows:
Light Output: 600 lumens
Beam Distance: 130 meters
Peak Intensity: 4225 candela
Battery: Built-in lithium polymer battery
What is included in the OLIGHT BALDR MINI package?
The box includes:
OLIGHT BALDR MINI (with battery)
Rail Mount Adapter
HM2.5*4.5 Socket Screw
Wrench
M3*4 Socket Set Screw
MCC Special Magnetic Charging Cable
How do I perform green beam calibration for the OLIGHT BALDR MINI?
Use the included wrench to rotate the adjustment screw on the side of the light to calibrate the vertical or horizontal angle of the green beam, and finally sight in the green beam for accurate use.
What should I do if the OLIGHT BALDR MINI is very hot?
Do not shine light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
Can I use the OLIGHT BALDR MINI on a plane?
Keep out of reach of children. Do not shine the light directly into human eyes. Do not cover the head of the light when it is on, or place the OLIGHT BALDR MINI head on the ground, as the light energy may cause damage to the light itself or even result in burning to other materials.
What are the safety precautions for the OLIGHT BALDR MINI?
Do not shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes. Do not cover the head of the light when it is on, or place the OLIGHT BALDR MINI head on the ground, as the light energy may cause damage to the light itself or even result in burning to other materials.
How do I install the OLIGHT BALDR MINI on a rail?
The OLIGHT BALDR MINI can be installed on a Glock or Picatinny rail. The GL standard is already installed and a Picatinny (1913) adapter is included in the package. You can install the OLIGHT BALDR MINI by loosening the screw on the side of the rail mount, sliding the light onto the rail, and tightening the screw.
What is the battery type for the OLIGHT BALDR MINI?
The OLIGHT BALDR MINI is powered by a built-in lithium polymer battery.
How do I know if the battery is low in the OLIGHT BALDR MINI?
The OLIGHT BALDR MINI features a low battery indicator.
Is the OLIGHT BALDR MINI water-resistant?
The OLIGHT BALDR MINI is water-resistant. Please keep the charging port clean before and after usage.
Can I use a different charging cable for the OLIGHT BALDR MINI?
The OLIGHT BALDR MINI is designed to be used with the included magnetic charging cable. Do not use other magnetic charging cables to charge the device.
What should I do if the OLIGHT BALDR MINI light is too hot?
Do not cover the head of the light when it is on, or place the OLIGHT BALDR MINI head on the ground, as the light energy may cause damage to the light itself or even result in burning to other materials.
How do I adjust the beam of the OLIGHT BALDR MINI?
Use the included wrench to rotate the adjustment screw on the side of the light to calibrate the vertical or horizontal angle of the green beam.
Does the OLIGHT BALDR MINI have a high temperature warning?
Do not cover the head of the light when it is on, or place the OLIGHT BALDR MINI head on the ground, as the light energy may cause damage to the light itself or even result in burning to other materials.
How do I maintain the OLIGHT BALDR MINI?
Please keep the charging port clean before and after usage.
What is the output of the OLIGHT BALDR MINI?
The OLIGHT BALDR MINI has a maximum light output of 600 lumens.
Does the OLIGHT BALDR MINI have a strobe mode?
The OLIGHT BALDR MINI does not mention a strobe mode in the operations section.
How is the OLIGHT BALDR MINI powered?
The OLIGHT BALDR MINI uses a built-in lithium polymer battery.
Can the OLIGHT BALDR MINI operate under water?
The OLIGHT BALDR MINI is water-resistant, but you should always keep the charging port clean.
How do I know which rail mount to use for the OLIGHT BALDR MINI?
The OLIGHT BALDR MINI comes with a GL standard mount installed, which is compatible with most Glock rails. If you have a Picatinny (1913) rail, you should switch to the included Picatinny adapter.
Can children use the OLIGHT BALDR MINI?
Keep the OLIGHT BALDR MINI out of reach of children.
What does the green indicator light signify on the OLIGHT BALDR MINI?
The green light on the OLIGHT BALDR MINI means the battery is fully charged.
How do I attach the OLIGHT BALDR MINI to the rail?
Loosen the screw on the side of the rail mount, slide the OLIGHT BALDR MINI onto the rail, and tighten the screw to secure it in place.
Can I use the OLIGHT BALDR MINI for self-defense?
Do not shine the OLIGHT BALDR MINI directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
Is the OLIGHT BALDR MINI mountable?
Yes, the OLIGHT BALDR MINI is designed to be mounted on a rail system using the provided rail mount adapters.
What should I do if the OLIGHT BALDR MINI green beam is off center?
Use the provided wrench to adjust the screw on the side of the OLIGHT BALDR MINI until the green beam is calibrated and sighted in correctly.
How far can the OLIGHT BALDR MINI shine?
The OLIGHT BALDR MINI has a beam distance of 130 meters.
What is the peak intensity of the OLIGHT BALDR MINI?
The peak intensity of the OLIGHT BALDR MINI is 4225 candela.
How do I switch between light modes on the OLIGHT BALDR MINI?
Use the light setting switch on the OLIGHT BALDR MINI to toggle between the three available modes: light only, light and green beam, or green beam only.
Does the OLIGHT BALDR MINI need external batteries?
No, the OLIGHT BALDR MINI comes with a built-in lithium polymer battery.
Is the OLIGHT BALDR MINI light beam adjustable?
Yes, the green beam on the OLIGHT BALDR MINI can be adjusted for vertical or horizontal orientation using the provided adjustment screw and wrench.
How secure is the OLIGHT BALDR MINI on the rail?
The OLIGHT BALDR MINI secures to the rail by tightening the screw on the mount, ensuring it is firmly held in the desired position.
What is the function of the screw on the side of the OLIGHT BALDR MINI?
The screw on the side of the OLIGHT BALDR MINI is used for calibrating the green beam, allowing you to adjust the vertical and horizontal angle.
Can I mount the OLIGHT BALDR MINI on a non-standard rail?
The OLIGHT BALDR MINI includes adapters for Glock and Picatinny (1913) rails, which cover the most common mounting standards.
What are the steps to charge the OLIGHT BALDR MINI safely?
Connect the USB end of the cable to a power source, attach the magnetic end to the OLIGHT BALDR MINI, and wait for the indicator light to turn green.
Is there a specific way to handle the OLIGHT BALDR MINI to avoid burning?
Do not cover the head of the OLIGHT BALDR MINI when it is on, and do not place the light head on the ground, as the heat generated could cause damage to the light or other surfaces.
How do I activate the light for a short period on the OLIGHT BALDR MINI?
For momentary activation, push and hold either side switch of the OLIGHT BALDR MINI. It will turn off once you release the switch.
What happens if I click the OLIGHT BALDR MINI side switch once?
A single click of either side switch on the OLIGHT BALDR MINI will activate constant on mode.
Can I adjust the OLIGHT BALDR MINI rail mount position?
Yes, you can loosen the rail screw to slide the OLIGHT BALDR MINI forward or backward on the rail to reach your preferred position.
How do I keep the OLIGHT BALDR MINI magnetic port functional?
The OLIGHT BALDR MINI requires the charging port to be kept clean before and after usage to maintain the effectiveness of the magnetic charging cable.
Are there any restrictions on where I can use the OLIGHT BALDR MINI?
The OLIGHT BALDR MINI should be kept out of reach of children and not used to shine directly into human eyes.
What is the purpose of the rail mount adapter included with the OLIGHT BALDR MINI?
The rail mount adapter allows the OLIGHT BALDR MINI to be securely attached to different types of rail systems, such as the Picatinny rail.
CLICK HERE TO DOWNLOAD OLIGHT BALDR MINI (01) PDF DOCUMENT