Free English OKI DATA AMERICAS C5200 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD OKI DATA AMERICAS C5200 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I install the duplexer on the OKI DATA AMERICAS C5200?
1. Unpack the duplexer and remove the shipping materials.
2. Turn off the printer.
3. Insert the duplexer through the hinged door in the back of the printer.
4. Turn on the printer.
How do I verify that the duplexer is correctly installed on the OKI DATA AMERICAS C5200?
You can verify installation by printing the Menu Map:
1. Press + one or more times until INFORMATION MENU appears on the display.
2. Press ENTER twice. The MenuMap prints.
3. Check to be sure that “DUPLEX installed” shows in the information at the top of the first page.
What should I do if “DUPLEX installed” does not appear on the Menu Map of the OKI DATA AMERICAS C5200?
If the information at the top of the first page of the Menu Map does not show “DUPLEX installed,” follow these steps:
1. Turn off the printer.
2. Push firmly on the duplexer to be sure it is firmly seated in the printer.
3. Turn on the printer and print the MenuMap again.
How do I change the default settings on the OKI DATA AMERICAS C5200 to always use duplex printing?
If you will always be using duplex printing, you can change the default setting in the printer menu:
1. Press + until you see PRINT MENU on the display.
2. Press ENTER.
3. Press + until you see DUPLEX on the display.
4. Press ENTER.
5. Press + to change the setting from OFF to ON.
6. Press ENTER to engage the setting, then press ON-LINE to save the setting and exit the menu.
How do I activate the duplexer in the Hiper-C Printer Driver for Windows on the OKI DATA AMERICAS C5200?
1. Click Start → Settings → Printers [Printers and Faxes for XP]. The Printers (Printers and Faxes) dialog box opens.
2. Right click the printer icon, then click Properties.
3. Select the appropriate tab based on your Windows version:
– Windows XP, 2000 and NT 4.0: click the Device Option(s) tab.
– Windows Me and 98: click the Printer Properties tab, then click the Device Option tab.
4. Select Duplex Option Unit.
5. Click OK, then close the Printers (Printers and Faxes) dialog box.
How do I set duplex printing as the default on the Macintosh (OS Classic) for the OKI DATA AMERICAS C5200?
If you will always utilize duplex printing on OS Classic:
1. Access the printer driver via an application (File →Print).
2. Select Layout in the drop down menu at the left.
3. Click the box to enable Print on Both Sides.
4. Select the desired binding position and make any other adjustments desired.
5. Click Save Settings.
How do I set duplex printing as the default on the Macintosh (OS X) for the OKI DATA AMERICAS C5200?
If you will always utilize duplex printing on OS X:
1. Access the printer driver via an application (File →Print).
2. Select Duplex in the drop down menu at the left.
3. Click the box to enable Print on Both Sides.
4. Select the desired binding position and make any other adjustments desired.
5. Save your printer profile preset with a descriptive name, e.g. Duplex Enabled.
6. Use this preset every time duplexing is required.
CLICK HERE TO DOWNLOAD OKI DATA AMERICAS C5200 (01) PDF DOCUMENT