FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF DOCUMENT.
FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF USER GUIDE.
FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF USER MANUAL.
FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF OWNER GUIDE.
FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF OWNER MANUAL.
FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF REFERENCE GUIDE.
FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF REFERENCE MANUAL.
FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What safety precautions should be followed?
WARNING: To avoid electric shock or component damage, disconnect power before attempting installation or servicing.
WARNING: This product must be installed in accordance with the national electric code (NEC) and all applicable federal, state and local electric codes and safety standards.
WARNING: Please follow the correct installation instructions to install the product.
WARNING: Do not use the product in wet locations.
How do I adjust the wattage and CCT before installation?
1. Select desired color temperature and wattage using the switches on the back of the luminaire.
Color Temperature Selection (5 Set Position):
Move the 5-CCT switch from the left to right position to select from the following options: 3000K / 3500K / 4000K / 5000K / 6500K.
Wattage Adjustment (3 Set Position):
Move the Power Switch to the Left, Middle, or Right position to select the desired wattage.
What are the wattage settings for each model?
| Items | Left Position | Middle Position | Right Position |
|---|---|---|---|
| NW-BL-2X2-20.30.40W-5CCT | 20W | 30W | 40W |
| NW-BL-1X4-20.30.40W-5CCT | 20W | 30W | 40W |
| NW-BL-2X4-30.40.50W-5CCT | 30W | 40W | 50W |
How do I install the light fixture?
1. Carefully unpack the fixture from its packaging and check contents.
2. Turn off power at circuit breaker.
3. Locate all four earthquake clips on the back of luminaire. Twist each tab away from luminaire. Hook them on the T-Bar.
4. Rest the luminaire on the T-Bar of the ceiling suspension system in the desired location.
How do I wire the light fixture?
1. Open the connection box and connect the incoming electrical wires to the set of power wires: black to black (LIVE), white to white (NEUTRAL) and green to green (GROUND).
2. For 0-10V dimming, make sure to connect the same wire color. Connect Purple (+) to Purple (+) and Pink (-) to Pink (-).
3. Check the wiring, make sure everything is correct. Recover the connection box. Then turn on power to the luminaire.
CLICK HERE TO DOWNLOAD NUWATT NW-BL-2X2-20.30.40W-5CCT (01) PDF DOCUMENT