Free English NINJA CRISPI FN090 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD NINJA CRISPI FN090 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How should I prepare the NINJA CRISPI FN090 before first use?
1. Remove and discard any packaging material, stickers, and tape from the unit.
2. Remove all accessories from the package and read this manual carefully. Please pay particular attention to operational instructions, warnings, and important safeguards to avoid any injury or property damage.
3. Wash the containers, adapter, crisper plates, and lids in hot, soapy water, then rinse and dry thoroughly. NEVER clean the PowerPod in the dishwasher.
What are the intended uses for the NINJA CRISPI FN090?
Use this appliance for air frying ONLY. DO NOT use for deep-frying. DO NOT use this appliance for anything other than its intended use.
What precautions should be taken when selecting a safe location for the NINJA CRISPI FN090?
Be sure the appliance is in an appropriate location before you start using it. DO NOT move or relocate when in use. Extreme caution must be used when the glassware containers contain hot food, oil, or liquids. Improper use may result in spilled food that can cause serious burns or personal injury.
How should the NINJA CRISPI FN090 be used for indoor countertop cooking?
This appliance is for indoor household use only. DO NOT use outdoors or in moving vehicles or boats.
For countertop use only. Ensure the surface is level, clean, and dry. DO NOT place near the edge of the worktop.
What steps should be taken to keep the NINJA CRISPI FN090 away from heat?
To prevent the risk of fire or property damage, DO NOT place appliance or power cord on a stovetop. Never place on hot surfaces, near a hot gas or electric burner, or in an oven.
How should I allow space for ventilation when using the NINJA CRISPI FN090?
DO NOT cover the air intake vent or air outlet vent while unit is operating. Doing so will prevent even cooking and may damage the unit or cause it to overheat. Keep all objects 6 inches away from vent while unit is in use.
What are the precautions for plugging the NINJA CRISPI FN090 directly into an appropriate socket?
1. Keep the appliance and its cord out of reach of children.
2. Select a socket above the countertop that allows the cord to be routed out of reach of children and away from hot surfaces and appliance vents.
3. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to modify the plug in any way.
4. To reduce the risk of the appliance being pulled down, potentially resulting in serious burns or impact injury:
• DO NOT let cord hang over edge of table or counters.
• DO NOT use an extension cord.
• A short power-supply cord is used to reduce the risk of cord being grabbed or becoming entangled and to reduce the risk of people tripping over a longer cord.
What should I do if the NINJA CRISPI FN090 is damaged?
Regularly inspect the appliance and power cord. If the appliance is damaged in any way (including the power cord or plug), DO NOT use. During operation, if the appliance malfunctions, immediately stop use and call Customer Service.
What is the preparation required before operating the NINJA CRISPI FN090?
ALWAYS ensure the PowerPod is properly secured on a Ninja TempWare container before operating.
How should I fill the NINJA CRISPI FN090 to appropriate levels?
To prevent food contact with heating element that may cause injury or affect the safe use of the appliance, DO NOT overfill the TempWare container with food past the lip of the container.
How do I check food temperature when using the NINJA CRISPI FN090?
Socket voltages can vary, affecting the performance of your product. To prevent possible illness, use a thermometer to check that your food is cooked to the temperatures recommended.
What are the general cleaning instructions for the NINJA CRISPI FN090?
1. ALWAYS turn unit off and unplug from socket when not in use and before cleaning.
2. To protect against electric shock, DO NOT immerse cord, plugs, or main unit housing in water or other liquid.
3. DO NOT clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, creating a risk of electric shock.
4. See Cleaning section.
Are modifications or unapproved accessories allowed with the NINJA CRISPI FN090?
1. Modifications or the use of accessories or parts not recommended by SharkNinja may result in fire, electric shock, or injuries. Use only cooking containers, accessories, attachments, or replacement parts that are recommended or sold by SharkNinja.
2. To avoid damage to heating element, NEVER remove finger guard from the PowerPod.
How should I use and care for the NINJA CRISPI FN090 TempWare Glass Containers?
Employ care, as glass will become hot during and after use.
There are some risks associated with using glassware for cooking:
(1) Breakage due to a sudden temperature change applied to the glassware
(2) Breakage due to impact if the glassware is dropped or knocked against a hard object
(3) Burning when handling hot glassware.
• Avoid sudden temperature changes to glassware. DO NOT add cool or cold liquid to hot glassware. DO NOT place hot glassware on a wet or cool surface, or directly on countertop or metal surface. Allow hot glassware to cool on a rack, pot holder, or dry cloth. Be sure to allow hot glassware to cool before washing, refrigerating, or freezing.
• DO NOT use Ninja TempWare Glass Containers on or under a flame or other direct heat source, including on a stovetop, under a broiler, on a grill, or in a toaster oven.
• Grasp glass containers by handles. Avoid touching and handling hot glassware directly without protective hot pads or insulated oven mitts.
• Be careful when handling broken glass because pieces may be extremely sharp and difficult to locate.
• DO NOT use or repair any glassware that is chipped, cracked, or severely scratched.
• DO NOT drop or hit glassware against a hard object or strike utensils against it.
Ninja TempWare Glass Containers are freezer safe, microwave safe, and dishwasher safe and may be washed by hand using non-abrasive cleansers and plastic or nylon cleaning pads if scouring is necessary. They are not oven or stovetop safe. Plastic lids are for microwave and storage use only and are BPA free.
What are the use and care guidelines for the PowerPod of the NINJA CRISPI FN090?
1. The PowerPod should NEVER be used on any container or vessel other than the Ninja glass container.
2. The PowerPod should NEVER be used when not on a Ninja glass container.
3. When placing PowerPod on the Ninja glass container, ALWAYS ensure easy-grip handles are aligned with the sides of the pod, NOT the front and back.
4. PowerPod will pause automatically when removed from the Ninja glass container. To resume cooking, place the PowerPod back on the Ninja glass container and press the START/POWER button.
5. NEVER remove the finger guard from the PowerPod.
6. All items should be kept 6 inches away from the PowerPod vent when the unit is in use.
7. PowerPod feet allow you to place the PowerPod directly on any countertop after use.
Cease all use of PowerPod if any feet are broken or damaged.
What are the use and care guidelines for the Ninja Glass Containers of the NINJA CRISPI FN090?
1. Heat-protectant base and easy-grip handles are fixed permanently to the Ninja glass containers and should NEVER be removed.
2. Cease using Ninja glass container if easy-grip handles or heat protectant base are broken or damaged.
3. Ninja glass containers are freezer safe, microwave safe, and dishwasher safe.
4. Ninja glass containers are NOT oven/stovetop safe.
5. Handle Ninja glass containers with care. They can break if dropped, hit hard against a surface, or struck with a hard utensil.
6. If a Ninja glass container becomes chipped, cracked, or deeply scratched, DO NOT use, as container strength may be compromised and the container could break or shatter.
If a piece of a Ninja glass container chips or breaks off, use thick gloves and caution while cleaning up the glass, as pieces may be sharp. Dispose of glass in a standard waste bin; DO NOT recycle.
What are the use and care guidelines for the Container Lids of the NINJA CRISPI FN090?
1. Lids are freezer safe, microwave safe (ensure lid is NOT sealed on Ninja glass container when in the microwave), and dishwasher safe (top rack only).
2. DO NOT seal lid on Ninja glass container directly after cooking.
3. NEVER place PowerPod, Ninja glass container, or crisper plate directly on lid after cooking.
What are the use and care guidelines for the Crisper Plates of the NINJA CRISPI FN090?
Crisper plates are dishwasher safe, but they are NOT microwave or oven safe.
What are the use and care guidelines for the Adapter of the NINJA CRISPI FN090?
1. Adapter should be used with the PowerPod ONLY when cooking in the 4-qt or 2.5-qt Ninja glass containers.
2. Adapter is dishwasher safe, but it is NOT microwave or oven safe.
Adapter should NEVER be used when cooking with the 5-cup or 6-cup Ninja glass containers.
3. Adapter will be hot after use; allow it to cool for 10 minutes before handling it.
How do I assemble the Adapter for the NINJA CRISPI FN090?
1. Place PowerPod into adapter, ensuring the 4 feet on the PowerPod are aligned with the four corners of the adapter.
2. Push PowerPod down until you feel the adapter click onto the PowerPod.
3. Place now assembled PowerPod and adapter onto large Ninja glass container.
How do I remove the Adapter from the NINJA CRISPI FN090?
1. PowerPod and adapter will be hot after cooking, allow both to cool for 10 minutes before interacting.
2. Grip the top of the PowerPod with one hand and use the other hand to grasp the front tab of the adapter.
3. Push down on the tab while lifting the PowerPod. PowerPod should easily lift off of the adapter.
Push PowerPod slightly back while pulling up for seamless removal.
How do I use the AIR FRY function on the NINJA CRISPI FN090?
1. Install a crisper plate in a Ninja glass container. Handle with care to avoid bending the crisper plate.
2. Add ingredients to the Ninja glass container.
For best results, DO NOT use the Air Fry function for frozen foods.
3. Place the PowerPod on top of the Ninja glass container, ensuring easy-grip handles are aligned with the sides of the PowerPod, NOT the front and back. “LID” will display on the control panel if not properly secured.
The adapter must be used when cooking with the large Ninja glass container. Insert the PowerPod into the adapter until it clicks into place, then place the adapter on top of the glass container.
4. Press the MODE button to cycle through the functions and select AIR FRY. Default time will display.
5. Use the TIME – and + buttons to select desired cooking time.
6. Press the START/POWER button to begin cooking. Unit will beep when cooking cycle starts.
7. To toss or flip ingredients during cooking, take PowerPod off container (it will stop automatically when removed) or press the START/POWER button to pause cooking. Shake container using easy-grip handles or flip foods with a silicone-tipped utensil. Place PowerPod back on container and press the START/POWER button to continue cooking.
8. When cooking is complete, the PowerPod will beep and “END” will appear on the display. The PowerPod will start cooling down and is safe to be removed from the container and placed directly on any countertop surface.
9. Eat right out of the container or remove ingredients using silicone-tipped tongs/utensil or dump out using easy-grip handles.
How do I use the RECRISP function on the NINJA CRISPI FN090?
1. Install a crisper plate in a Ninja glass container. Handle with care to avoid bending the crisper plate.
2. Add ingredients to the Ninja glass container.
For best results, DO NOT use the Recrisp function for frozen foods.
If recrisping multiple food types at once, place a layer of ingredients in the bottom of the container. Then install the crisper plate and set a second layer of ingredients on the crisper plate.
3. Place the PowerPod on top of the Ninja glass container, ensuring easy-grip handles are aligned with the sides of the PowerPod, NOT the front and back. “LID” will display on the control panel if not properly secured.
The adapter must be used when cooking with the large Ninja glass container. Insert the PowerPod into the adapter until it clicks into place, then place the adapter on top of the glass container.
4. Press the MODE button to cycle through the functions and select RECRISP. Default cook time will display.
5. Use the TIME – and + buttons to select desired cooking time.
6. Press the START/POWER button to begin cooking. Unit will beep when cooking cycle starts.
7. To toss or flip ingredients during cooking, take PowerPod off container (it will stop automatically when removed) or press the START/POWER button to pause cooking. Shake container using easy-grip handles or flip foods with a silicone-tipped utensil. Place PowerPod back on container and press the START/POWER button to continue cooking.
8. When cooking is complete, the PowerPod will beep and “END” will appear on the display. The PowerPod will start cooling down and is safe to be removed from the container and placed directly on any countertop surface.
9. Eat right out of the container or remove ingredients using silicone-tipped tongs/utensil or dump out using easy-grip handles.
How do I use the MAX CRISP function on the NINJA CRISPI FN090?
For best results with frozen foods, use ONLY the Max Crisp function.
1. Install a crisper plate in a Ninja glass container. Handle with care to avoid bending the crisper plate.
2. Add ingredients to the Ninja glass container
3. Place the PowerPod on top of the Ninja glass container, ensuring easy-grip handles are aligned with the sides of the PowerPod, NOT the front and back. “LID” will display on the control panel if not properly secured.
The adapter must be used when cooking with the large Ninja glass container. Insert the PowerPod into the adapter until it clicks into place, then place the adapter on top of the glass container.
4. Press the MODE button to cycle through the functions and select MAX CRISP. Default time will display.
5. Use the TIME – and + buttons to select desired cooking time.
6. Press the START/POWER button to begin cooking. Unit will beep when cooking cycle starts.
7. To toss or flip ingredients during cooking, take PowerPod off container (it will stop automatically when removed) or press the START button to pause cooking. Shake container using easy-grip handles or flip foods with a silicone-tipped utensil. Place PowerPod back on container and press the START/POWER button to continue cooking.
8. When cooking is complete, the PowerPod will beep and “END” will appear on the display. The PowerPod will start cooling down and is safe to be removed from the container and placed directly on any countertop surface.
9. Eat right out of the container or remove ingredients using silicone-tipped tongs/utensil or dump out using easy-grip handles.
How do I use the BAKE function on the NINJA CRISPI FN090?
(Bake function is not available on all models.)
1. Install a crisper plate in a Ninja glass container. Handle with care to avoid bending the crisper plate.
2. Add ingredients to the Ninja glass container.
3. Place the PowerPod on top of the Ninja glass container, ensuring easy-grip handles are aligned with the sides of the PowerPod, NOT the front and back. “LID” will display on the control panel if not properly secured.
The adapter must be used when cooking with the large Ninja glass container. Insert the PowerPod into the adapter until it clicks into place, then place the adapter on top of the glass container.
4. Press the MODE button to cycle through the functions and select BAKE. Default time will display.
5. Use the TIME – and + buttons to select desired cooking time.
6. Press the START/POWER button to begin cooking. Unit will beep when cooking cycle starts.
7. When cooking is complete, the PowerPod will beep and “END” will appear on the display. The PowerPod will start cooling down and is safe to be removed from the container and placed directly on any countertop surface.
8. Eat right out of the container or remove ingredients using silicone-tipped tongs/utensil or dump out using easy-grip handles.
To remove adapter after cooking, allow to cool, then use front tab to easily lift PowerPod out of the adapter. Then remove adapter from the glass container.
How do I clean the parts and accessories of the NINJA CRISPI FN090?
The PowerPod should be cleaned thoroughly after each use. ALWAYS let the appliance cool completely before cleaning.
| Part/Accessory | Cleaning Method | Dishwasher Safe? |
|---|---|---|
| PowerPod | To clean the PowerPod and the control panel, wipe them clean with a damp cloth. NOTE: NEVER immerse the PowerPod in water or any other liquid. NEVER clean the PowerPod in a dishwasher. | No |
| Ninja Glass Containers | The containers can be washed in the dishwasher or by hand. If hand-washing, thoroughly air-dry or towel-dry all parts after use. | Yes |
| Crisper Plates | The crisper plates can be washed in the dishwasher or by hand. If hand-washing, thoroughly air-dry or towel-dry all parts after use. | Yes |
| Lids | The lids can be washed in the dishwasher (top rack only) or by hand. If hand-washing, thoroughly air-dry or towel-dry all parts after use. | Yes |
| Adapter | The adapter can be washed in the dishwasher or by hand. If hand-washing, thoroughly air-dry or towel-dry after use. | Yes |
What are some helpful tips for using the NINJA CRISPI FN090?
1. Heat-protectant base on Ninja glass containers allows you to safely cook on any countertop surface with no heat damage.
2. Easy-grip handles on Ninja glass containers allow you to safely handle containers after cooking.
3. For consistent browning, make sure ingredients are arranged in an even layer on the bottom of the glass container with no overlapping. If ingredients are overlapping, make sure to shake them halfway through the set cook time.
4. Cook time and function can be adjusted at any time during cooking. Press the TIME – and + buttons or MODE button to adjust the time and function.
5. Check food frequently to avoid overcooking.
6. PowerPod will pause automatically when removed from the Ninja glass container. To resume cooking, place the PowerPod back on the Ninja glass container and press the START/POWER button.
7. PowerPod feet allow you to place the PowerPod directly on any countertop after use.
Cease all use of PowerPod if any feet are broken or damaged.
8. For quicker cooking, cut protein in 1-inch pieces.
9. The crisper plate elevates ingredients in the basket so air can circulate under and around them for consistent, crisp results.
10. For best results, remove food immediately after the cook time is complete to avoid overcooking.
11. For best results with fresh vegetables and potatoes, use at least 1 tablespoon of oil. Add more oil as desired to achieve the preferred level of crispiness.
12. For best results, check progress throughout cooking, and remove food when desired level of brownness has been achieved. We recommend using an instant-read thermometer to monitor internal temperature of proteins. After the cook time is complete, remove food immediately to avoid overcooking.
Does my NINJA CRISPI FN090 unit need to preheat?
No, the unit does not need to be preheated.
When should I use Max Crisp instead of Air Fry on the NINJA CRISPI FN090?
For best results, use Max Crisp when cooking prepackaged frozen foods such as French fries or chicken nuggets.
Why is LID appearing on the display screen of the NINJA CRISPI FN090?
PowerPod is not secured properly on Ninja glass container. Make sure PowerPod is aligned and leveled on the container. If using the adapter, ensure PowerPod is fully inserted into the adapter.
How do I pause the countdown on the NINJA CRISPI FN090?
Pressing START/POWER button or lifting the PowerPod off the container during cooking will pause the cooking function.
Is the PowerPod safe to put on my countertop after use with the NINJA CRISPI FN090?
Yes, the PowerPod with or without the adapter on can safely be placed on any countertop during or after cooking.
Are the glass containers safe to put on my countertop after use with the NINJA CRISPI FN090?
Yes, the heat protectant base on the Ninja glass containers allows them to be placed on any countertop during or after cooking.
How do I know when to use the crisper plate with the NINJA CRISPI FN090?
Use the crisper plate when you want food to come out crispy. The plate elevates the food in the basket so that air can flow under it to cook ingredients evenly.
Why did my food not cook in the NINJA CRISPI FN090?
Make sure the PowerPod is properly secured on Ninja glass container during cooking. For consistent browning, make sure ingredients are arranged in an even layer on the bottom of the basket with no overlapping. Use easy-grip handles on glass containers to shake to toss loose ingredients for consistent crispiness. Cook time and function can be adjusted at any time during cooking. Simply press the TIME – and + or MODE buttons.
Why is my food burned in the NINJA CRISPI FN090?
For best results, check progress throughout cooking, and remove food when desired level of brownness has been achieved. Remove food immediately after the cook time is complete to avoid overcooking.
Why do some ingredients blow around when air frying in the NINJA CRISPI FN090?
Occasionally, the fan from the air fryer will blow lightweight foods around. Use toothpicks to secure loose lightweight food, like the top slice on a sandwich.
Can I air fry fresh battered ingredients in the NINJA CRISPI FN090?
Yes, but use the proper breading technique. It is important to coat foods first with flour, then with egg, and then with breadcrumbs. Be sure to press the breadcrumbs onto the food so they stick in place. Loose breading may be blown off by the unit’s powerful fan.
Why is the NINJA CRISPI FN090 unit beeping?
The unit beeps when the cooking function starts and again when the cooking function is complete.
The screen of the NINJA CRISPI FN090 went black. What should I do?
The unit is in standby mode. Press the START/POWER button to turn it back on.
An “E” message appears on the display screen of the NINJA CRISPI FN090. What should I do?
The unit is not functioning properly. Please contact Customer Service.
CLICK HERE TO DOWNLOAD NINJA CRISPI FN090 (01) PDF DOCUMENT