Free English NENO BEAUTY AURI (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD NENO BEAUTY AURI (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.


How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.


What are the operational modes of the NENO BEAUTY AURI?

The NENO BEAUTY AURI device has two modes:

  • ANTI-AGING (rejuvenating): dedicated to comprehensive regeneration, it combines precise RF waves with sonic massage and an ergonomic Gua Sha-shaped head to deeply stimulate collagen production, smooth wrinkles and firm and shape the contours of the face and neck. The mode has two levels of intensity.
  • BRIGHTEN (brightening): an advanced version of the ANTI-AGING mode, enriched with muscle stimulation using EMS pulses and 620 nm red light therapy. EMS activates mimic muscles, improving skin tone and elasticity, resulting in a visible lifting effect and enhancing facial contours. The red LED light further promotes regeneration, helps reduce the appearance of minor discolouration, reduces grey complexion and restores a healthy, radiant appearance. The mode has two intensity levels.

How do I switch on the ANTI-AGING mode on the NENO BEAUTY AURI?

To switch on the NENO BEAUTY AURI device for the ANTI-AGING mode, remove the magnetic cover or press and hold button A8 (a beep will sound). Then use the same button to set the ANTI-AGING mode (the mode indicator will illuminate yellow or red and the unit will beep).


How can I tell the intensity level in the ANTI-AGING mode of the NENO BEAUTY AURI?

In the ANTI-AGING mode on the NENO BEAUTY AURI, yellow illumination indicates a gentle rejuvenation mode, while red illumination indicates an intense rejuvenation mode. The two intensity levels may differ in the degree of sonic vibration, allowing the device’s action to be tailored to individual skin needs.


How do I switch on the BRIGHTEN mode on the NENO BEAUTY AURI?

To switch on the NENO BEAUTY AURI device for the BRIGHTEN mode, remove the magnetic cover or press and hold button A8 (a beep will sound). Then set the BRIGHTEN mode using the same button (the mode indicator will light up yellow or red and the unit will beep).


How can I tell the intensity level in the BRIGHTEN mode of the NENO BEAUTY AURI?

In the BRIGHTEN mode on the NENO BEAUTY AURI, yellow backlighting indicates a gentle brightening mode, while red backlighting is an intense brightening mode. The two intensity levels differ in the strength of the EMS pulses and the degree of sonic vibration, allowing the device’s action to be precisely tailored to individual skin needs.


What is the recommended procedure for using the NENO BEAUTY AURI during a massage?

During the massage on the NENO BEAUTY AURI, move the device slowly over the face and neck, making upward and outward movements, following the natural direction of lymphatic drainage. The device signals the change of area every minute.


What is the duration of the automatic timer on the NENO BEAUTY AURI?

The NENO BEAUTY AURI device has a built-in 6-minute timer: six minutes after setting one of the modes, the device will switch off. The time does not add up when changing modes during their operation.


How do I switch off the NENO BEAUTY AURI before the 6-minute timer elapses?

To switch off the NENO BEAUTY AURI device before 6 minutes have elapsed, the magnetic cover must be applied or button A8 must be pressed and held down.


What happens after the massage with the NENO BEAUTY AURI is finished?

Once the massage with the NENO BEAUTY AURI is over, you can move on to the next stages of care.


Does the NENO BEAUTY AURI have a memory mode?

Yes, the NENO BEAUTY AURI device has a memory mode – when the massager is switched on again, it will automatically start in the last mode used.


What is the recommended frequency for using the NENO BEAUTY AURI?

Use the NENO BEAUTY AURI massager 2-4 times a week (for 6-12 minutes), choosing the mode that suits your needs.


What is the procedure for cleaning the massage head of the NENO BEAUTY AURI after each use?

After each use of the NENO BEAUTY AURI, wipe the massage head with a dry or slightly damp cloth. Let it dry in a well-ventilated place, away from direct sunlight and heat sources, then apply the magnetic cover. Do not immerse the device in water and do not use highly corrosive detergents or alcohol. When not in use, the product should be stored in the bag provided.


How do I start charging the NENO BEAUTY AURI device?

To start charging the NENO BEAUTY AURI device, open the charging port cap with the supplied pin. During charging, the three power indicator LEDs flash successively from left to right. The device cannot be used during charging. The power indicator lights illuminate continuously when the device is fully charged. When the battery level drops below 10%, the power indicator LEDs flash sequentially from left to right, indicating that the device needs to be charged. If an attempt is made to start the unit with a fully discharged battery, a double beep will sound, the power indicator LEDs will flash twice and the unit will automatically switch off.


What should I use with the NENO BEAUTY AURI for optimal results and comfort?

For optimal results and comfort when using the NENO BEAUTY AURI, it is recommended to use the device with a conductive gel suitable for RF and EMS technology or with a light, oil-free facial cosmetic that does not impede the smooth gliding of the device over the skin.


What should I do if I feel discomfort while using the NENO BEAUTY AURI?

If you feel discomfort during the use of the NENO BEAUTY AURI, discontinue use immediately.


Can the NENO BEAUTY AURI be used while it is charging?

No, the NENO BEAUTY AURI device should not be used while it is charging. Disconnect it from the power supply when it is fully charged.


What are the specifications for the NENO BEAUTY AURI regarding power supply, power, and battery?

The specifications for the NENO BEAUTY AURI are as follows:

Specification Detail
Power supply 5V 0.29A
Power 5W
Battery Lithium-polymer 500mAh

What are the specifications for the NENO BEAUTY AURI regarding timer, light wavelengths, material, dimensions, and weight?

The specifications for the NENO BEAUTY AURI are as follows:

Specification Detail
Timer 6min
Light wavelengths Red light 620±5 nm
Material ABS + TPU + PC
Dimensions 90.4 x 86.4 x 26.4 mm
Weight 104g

CLICK HERE TO DOWNLOAD NENO BEAUTY AURI (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.