NEEWER HS200B (01) PDF Document

To ensure safety when using the NEEWER HS200B Portable Bi-Color LED Video Light, you must observe the following:

• Do not place flammable materials near the constant video light.
• Please use a blower brush or clean cloth to remove dust and moisture.
• Do not expose the product to direct sunlight for long periods of time. The product should not be stored in direct sunlight.
• Do not use in the rain, a humid environment, or other adverse weather conditions.
• Keep the working environment clear of cables. Keep this product out of reach of children and pets.
• Please turn off and remove the power supply before maintenance, and installing or removing accessories.
• Do not cover the ventilation holes at any time.
• Do not attempt to disassemble or repair the device.
• Do not use chemicals or liquids to clean the lamp. Do not immerse any part of the device in liquid.
• The constant video light will heat up during use. Do not touch hot components with your hands.

To install the reflector on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Press the protective cover release button and rotate the cover counterclockwise until its tabs align with the mounting slots. Then, remove the protective cover.

Step 2. Align the three metal tabs of the reflector with the three gaps on the front of the studio light, push the reflector inwards, and rotate it clockwise until it is securely locked.

To mount the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 3. Attach the support mount to the studio light and secure it by rotating the knob.

Step 4. Drop the adapter base onto the light stand and tighten the fixing knob.

Step 5. Adjust the lighting angle of the studio light by rotating the angle adjustment knob.

Step 6. Connect the power cable from the controller to the light body, then tighten the knob to secure it.

The NEEWER HS200B Portable Bi-Color LED Video Light supports two power supply methods:

Step 1. Use AC power cable for power connection (AC IN 100-240V/50Hz/60Hz).

Step 2. Use a 48V portable power source (DC IN 48V/7A).

To turn the NEEWER HS200B Portable Bi-Color LED Video Light on or off, flip the ON/OFF switch located on the controller to the desired position (ON or OFF).

To adjust the brightness on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MODE button to select any mode.

Step 2. Press the ” button to choose ‘INT’.

Step 3. Turn the adjustment knob to adjust the brightness.

To adjust the color temperature on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MODE button to select CCT mode.

Step 2. Press the ” button to choose ‘CCT’.

Step 3. Turn the adjustment knob to adjust the color temperature.

To switch between the 11 light sources on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MODE button to select the ” mode.

Step 2. Press the ” button to choose light source adjustment.

Step 3. Turn the adjustment knob to switch between the 11 light sources.

To select a scene effect on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MODE button to select FX mode.

Step 2. Press the ” button to choose a scene.

Step 3. Turn the adjustment knob to switch between different scenes.

The NEEWER HS200B Portable Bi-Color LED Video Light has 13 available lighting effects:

The NEEWER HS200B Portable Bi-Color LED Video Light features 11 light sources:

• Dawn: 5000K
• Daytime: 5500K
• Daylight: 6500K
• Incandescent Lamp: 3200K
• Video Lamp: 3300K
• Modeling Lamp: 3400K
• 5600 Dysprosium Lamp: 5600K
• Daylight Dysprosium Lamp: 6000K
• Warm White Halogen Lamp: 2700K
• White Halogen Lamp: 4300K
• Xenon Short-Arc Lamp: 6200K

The NEEWER HS200B Portable Bi-Color LED Video Light Menu offers the following functions and settings:

For DMX settings on the NEEWER HS200B Portable Bi-Color LED Video Light:

There are five DMX modes available for the NEEWER HS200B Portable Bi-Color LED Video Light:

1. DMX MODE1: CCT(2 bit)
2. DMX MODE2: Source(2 bit)
3. DMX MODE3: FX(6 bit)
4. DMX MODE4: Ultimate mode(8 bit)
5. DMX MODE5: neewer mode(7 bit)

To set up 2.4G Mode for synchronized control on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MENU button to enter the menu and turn the adjustment knob to choose the Infinity CH icon (

). Press ‘⇌’ to enter the submenu, turn the adjustment knob to select CH, and short press ‘⇒’ to confirm and exit.

Step 2. Short press the MENU button to enter the menu and turn the adjustment knob to choose CH. Then press ‘⇌’ to enter the submenu and rotate the adjustment knob to choose one of the channels within the range CH00-CH99. Finally short press ‘⇌’ to confirm and exit.

In 2.4G mode, set multiple LED lights to the same channel (e.g., CH88). When adjusting one of the lights, the others will change synchronously.

To enable or disable DMX on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MENU button to enter the menu and turn the adjustment knob to select DMX.

Step 2. Press ‘⇌’ to enter the submenu.

Step 3. Rotate the adjustment knob to choose ‘ON’ or ‘OFF’ to activate or deactivate DMX.

To set the DMX Channel Address on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MENU button to enter the menu and turn the adjustment knob to select DMX.

Step 2. Then press ‘⇌’ to enter the submenu and turn the adjustment knob to choose from the channel range 1-512.

To adjust DMX signal loss settings on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MENU button to enter the menu and turn the adjustment knob to select the Signal Loss Icon (power symbol next to DMX icon).

Step 2. Then press ‘⇌’ to enter the submenu and turn the adjustment knob to adjust DMX signal loss behavior (options include immediate turn off, turn off after 60S, turn off after 120S, or remember last settings).

To select the DMX Mode on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MENU button to enter the menu, then turn the adjustment knob to select the DMX Mode icon (Wi-Fi waves with a DMX icon).

Step 2. Press ‘⇌’ to enter the submenu and turn the adjustment knob to select DMX mode 1-5.

To check the current temperature on the NEEWER HS200B Portable Bi-Color LED Video Light, short press the temperature icon (33°C) to view the current temperature.

To lock or unlock the buttons on the control panel of the NEEWER HS200B Portable Bi-Color LED Video Light, long press the Control Panel Lock icon (padlock symbol).

To switch between operating modes on the NEEWER HS200B Portable Bi-Color LED Video Light, short press the Fan icon button to cycle through Silent mode, Constant Power mode, and Boost mode.

The heat dissipation modes for the NEEWER HS200B Portable Bi-Color LED Video Light are:

Booster mode automatically adjusts to the maximum output up to 280W based on the light source’s temperature.

The “HVP” warning prompt on the NEEWER HS200B Portable Bi-Color LED Video Light indicates Overvoltage protection.

The “LVP” warning prompt on the NEEWER HS200B Portable Bi-Color LED Video Light indicates Undervoltage protection.

The “Fan abnormality” warning prompt (exclamation mark in a triangle) on the NEEWER HS200B Portable Bi-Color LED Video Light indicates a problem with the fan.

The “OTP” warning prompt on the NEEWER HS200B Portable Bi-Color LED Video Light indicates Over-temperature protection.

The specifications for the NEEWER HS200B Portable Bi-Color LED Video Light are as follows:

The illumination values (Lux) for the NEEWER HS200B Portable Bi-Color LED Video Light at 1 meter distance are:

To set Infinity Mode on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MENU button to enter the menu and turn the adjustment knob to select the Infinity Mode icon (interlocking circles). Press ‘⇌’ to enter the submenu.

Step 2. Turn the adjustment knob to choose the desired setting (CH or OFF).

Step 3. Press ‘⇒’ to confirm and exit.

The INFINITY RESET function on the NEEWER HS200B Portable Bi-Color LED Video Light allows you to reset the Infinity connection, with settings being YES or NO.

To select Dimming Curves on the NEEWER HS200B Portable Bi-Color LED Video Light:

Step 1. Short press the MENU button to enter the menu and turn the adjustment knob to select the Dimming Curve icon (wavy line icon).

Step 2. Then press ‘⇌’ to enter the submenu and rotate the adjustment knob to choose S, Log, Exp, or Linear curve.

Step 3. Finally short press ‘⇌’ to confirm and exit.