Free English NEC VT47 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD NEC VT47 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I connect to the COMPUTER IN port on the NEC VT47?
You should connect the supplied 15pin-15pin signal cable to the COMPUTER IN port on the NEC VT47.
What should I do if I have an older Macintosh computer when connecting to the NEC VT47?
For older Macintosh computers, use a commercially available pin adapter to connect to your Macintosh’s video port when connecting the signal cable to the NEC VT47.
What should I connect to the power source for the NEC VT47?
You should connect the supplied power cable to the NEC VT47.
How do I turn on the main power to the NEC VT47?
To turn on the main power to the NEC VT47, press the Main Power switch to the on position (1).
The projector will go into its standby mode and the power indicator will glow orange.
How do I turn on the power to the NEC VT47 after turning on the main power switch?
To turn on the power to the NEC VT47, press and hold the ON/STAND BY button on the projector cabinet or the POWER ON button on the remote control for a minimum of 2 seconds.
How do I select a source on the NEC VT47?
Turn on the computer. Press the COMPUTER 1 or COMPUTER 2 button on the remote control (SOURCE button on NEC VT47).
How do I automatically optimize an RGB image on the NEC VT47?
Press the AUTO ADJ. button on the projector cabinet to optimize an RGB image automatically on the NEC VT47.
How do I extend the adjustable tilt feet on the NEC VT47 to reach maximum height?
Push up and hold the Adjustable Tilt Foot Button on the front of the NEC VT47 to extend the adjustable tilt feet (maximum height).
How do I finely adjust the image size on the screen for the NEC VT47?
Use the Zoom lever to finely adjust the image size on the screen. On the NEC VT47, use the Digital ZOOM button on the projector cabinet.
How do I obtain the best focus for the image on the NEC VT47?
Use the Focus ring to obtain the best focus on the NEC VT47.
How does the Auto Keystone Correction feature work on the NEC VT47?
The Auto Keystone correction feature on the NEC VT47 will correct the vertical distortion of a projected image on the screen. No special operation is required. Just put the projector on a flat surface.
CLICK HERE TO DOWNLOAD NEC VT47 (02) PDF DOCUMENT