Free English MSI MPG GUNGNIR 100P (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MSI MPG GUNGNIR 100P (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the dimensions for the MSI MPG GUNGNIR 100P case?
The dimensions for the MSI MPG GUNGNIR 100P case are as follows:
| Dimension | Measurement |
| Length | 510mm |
| Width | 227mm |
| Height | 525mm |
What is the maximum GPU Length supported by the MSI MPG GUNGNIR 100P case?
The Maximum GPU Length supported by the MSI MPG GUNGNIR 100P case is 400mm.
What is the maximum CPU Height supported by the MSI MPG GUNGNIR 100P case?
The Maximum CPU Height supported by the MSI MPG GUNGNIR 100P case is 170mm.
What is the maximum PSU Length supported by the MSI MPG GUNGNIR 100P case?
The Maximum PSU Length supported by the MSI MPG GUNGNIR 100P case is 200mm.
What are the fan mounting options for the front of the MSI MPG GUNGNIR 100P case?
The fan mounting options for the front of the MSI MPG GUNGNIR 100P case are 3x120mm or 3x140mm.
What are the radiator compatibility options for the front of the MSI MPG GUNGNIR 100P case?
The radiator compatibility options for the front of the MSI MPG GUNGNIR 100P case are 360mm or 420mm.
What are the radiator compatibility options for the top of the MSI MPG GUNGNIR 100P case?
The radiator compatibility options for the top of the MSI MPG GUNGNIR 100P case are 360mm or 240mm.
What are the radiator compatibility options for the rear of the MSI MPG GUNGNIR 100P case?
The radiator compatibility options for the rear of the MSI MPG GUNGNIR 100P case are 120mm or 140mm.
How do I install the Front I/O Connectors for the MSI MPG GUNGNIR 100P case?
Please refer to your motherboard user’s manual to install the front panel I/O. The drawings provided in the documentation are for reference only.
To connect the Front Panel I/O:
Step 1. Connect the USB 3.0 cable to the corresponding header on the motherboard.
Step 2. Connect the Front Audio cable to the Front Audio header on the motherboard.
Step 3. Connect the Front Panel connectors (including LED/Reset) to the Front Panel pinheader on the motherboard.
How should I connect the LED/Reset cables for the MSI MPG GUNGNIR 100P case?
For LED Function, connect the LED/Reset cable to the MSI ARGB Hub. For Reset Function, connect the LED/Reset cable on the Motherboard reset pinheader.
What components are included in the Accessory Kit for the MSI MPG GUNGNIR 100P case?
The Accessory Kit Contents for the MSI MPG GUNGNIR 100P case include the following items:
| Item | Description | Quantity |
| Long Fan Screws/30 mm | (Not applicable for MSI MPG GUNGNIR 100P) | x 12 |
| Motherboard Screws/ 6.5mm | Motherboard Screws/ 6.5mm | x 21 |
| HDD Screws/6.5mm | HDD Screws/6.5mm | x 8 |
| PSU Screws/9mm | PSU Screws/9mm | x 4 |
| Cable Ties | Cable Ties | x 6 |
What are the identified Case Features labeled on the MSI MPG GUNGNIR 100P chassis?
The identified Case Features labeled on the MSI MPG GUNGNIR 100P chassis are:
A: Tempered Glass Side Panel
B: Dust Filter
C: Solid Side Panel
D: Customize Logo Panel
E: Front Bezel
F: Removable SSD Trays
G: HDD Cages and Trays
How do I connect the ARGB Hub and Front LED for the MSI MPG GUNGNIR 100P case?
For the 1 to 8 ARGB Hub Connection:
Step 1. Connect the JRAINBOW (ARGB) cable from the front panel/hub to the JRAINBOW header on the motherboard.
Step 2. Connect the LED SW cable to the LED Switch (optional).
Step 3. Connect the Power cable from the hub to the SATA Power connector.
Step 4. Connect the SYS_FAN output from the hub to a SYS_FAN header on the motherboard (SYS_FAN1~4).
To connect PWM Mode and ARGB LED to the motherboard:
Connect JRAINBOW2 to the motherboard’s ARGB header (JRAINBOW2 on the motherboard illustration).
Connect JRAINBOW1 to another available ARGB header on the motherboard (JRAINBOW1 on the motherboard illustration).
The connection pinout for JRAINBOW1 is:
| Pin | JRAINBOW1 | Pin | JRAINBOW2 |
| 1 | +5V | 1 | +5V |
| 2 | Data | 2 | Data |
| 3 | No Pin | 3 | No Pin |
| 4 | Ground | 4 | Ground |
Ensure that the PWM mode fan connector is linked to the motherboard fan header (SYS_FAN1-4).
CLICK HERE TO DOWNLOAD MSI MPG GUNGNIR 100P (01) PDF DOCUMENT