MI XIAOMI A27QI (01) PDF Document

Here are the specifications for the monitor and its external AC adapter.

Monitor Specifications

*The power of the power adapter is not included.

The product nameplate is located on the bottom of the monitor.

External AC Adapter Specifications

The function buttons on your MI XIAOMI A27QI monitor have different actions depending on whether the on-screen menu is displayed.

To wall mount your MI XIAOMI A27QI monitor, please follow these steps and requirements. Note that the wall mount must be purchased separately.

Compatibility: This product is compatible with wall mounts that have a hole spacing of 75 x 75 mm.

Bolt Requirements:

Quantity: 4

Thread: M4

Length: 10 mm

Instructions to remove the base:

1. Lay the monitor flat, with its back facing upwards, on a stable and protected surface.

2. Use your finger to press the spring clip that joins the base to the monitor.

3. While pressing the clip, remove the base.

Note: When removing the base, be careful not to pinch your finger in the spring clip.

Installation:

Follow the wall mount user manual to install the wall mount onto the bolts that are built into the housing back.

Please follow these precautions to ensure safe use of your monitor:

• Do not use this monitor in damp or humid environments such as bathrooms, kitchens, basements, or near swimming pools.

• Make sure the monitor is placed on a stable surface. If the monitor falls down or is knocked over, it may cause personal injury or damage to the monitor.

• Store and use the monitor in a cool, dry, and ventilated place. Keep the monitor away from radiation and heat sources.

• Do not cover or block the heat dissipation vents on the back of the monitor. Do not place the monitor on a bed, sofa, blanket, etc.

• The monitor’s operating voltage range is indicated on a label on the back of the monitor. If you are unsure what voltage your power supply is, please contact the monitor’s distributor or local power company.

• If you do not plan to use the monitor for a long period of time, unplug it from the electrical outlet so as to prevent possible damage from power surges or lightning strikes.

• Do not overload electrical outlets, as this may cause a fire or an electric shock.

• Do not attempt to disassemble or repair the monitor by yourself to avoid the risk of an electric shock. If the monitor is not functioning properly, please contact the after-sales service department for help.

• Do not excessively pull, twist, or bend the power cord.

• The power plug is a means of disconnecting the equipment from the mains. No loose items should be placed around the power plug to make sure that it can be easily plugged or unplugged.

• For pluggable devices, the output socket should be easily accessible.

• When adjusting the tilt angle of the monitor, it is recommended that you support the base with one hand and adjust the monitor with the other hand. The monitor can easily tip over if you adjust it with only one hand.

To avoid eyestrain, or neck, arm, elbow, and shoulder pain caused by using the computer for a long time, please follow the suggestions listed below:

• Keep the monitor at a distance of 20-28 inches (approx. 50–70 cm) from your eyes.

• Blink more often to relieve eye fatigue when staring at the monitor.

• Give your eyes a 20-minute break after using the monitor for two hours.

• Take your eyes off the monitor and look at something a certain distance away for at least 20 seconds.

• Stretch your body to help relieve tension on the neck, arms, back, and shoulders.

The Low Blue Light feature is designed to help reduce your exposure to blue light emission. In general, the wavelength of blue light is 400-480 nm, and the wavelength of harmful blue light is 415–455 nm. Your MI XIAOMI A27QI monitor has this function to help protect your eyes. You can enable the low blue light mode via the settings menu.