Free English MEIJI LABAX BM (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MEIJI LABAX BM (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I unpack the MEIJI LABAX BM widefield stereo microscope?
The MEIJI LABAX BM widefield stereo microscope is usually supplied in a styrofoam container. Remove the instrument from its container by grasping the optical head with one hand, and supporting the base with the other. Place the microscope on a flat surface, and clamp the safety collar and cross-arm firmly.
Do not discard any packing material until the instrument has been checked against the packing list. Sometimes small components are packed in the styrofoam container.
What is the coarse adjustment procedure for the MEIJI LABAX BM widefield stereo microscope?
Two height adjustments are necessary to make the stereo ready for use. Position the crossarm or support arm and clamp in place. Then focus on the specimen using the focusing controls. Now clamp the safety collar in place.
How do I perform the interpupiliary distance adjustment on the MEIJI LABAX BM widefield stereo microscope?
The distance between the eyetubes can be adjusted to suit each individual user. Take both prism houses in your hands, while looking through the eyepieces, and rotate until a single image is formed.
What is the focusing procedure for the MEIJI LABAX BM widefield stereo microscope?
a) Look through the right eyepiece only, and focus on the specimen using the focusing knobs, until the image is sharp focus.
b) Now look through the left eyepiece, and focus using the eyetube diopter adjustment, until this image also is in sharp focus.
c) Each individual user must follow steps a and b to achieve a true stereoscopic image.
How do I change the magnification on the MEIJI LABAX BM widefield stereo microscope?
All models have paired objectives in sliding mounts, and optional eyepieces. To change the magnification, hold the objective housing between finger and thumb and slide to the right. The replacement objective is mounted in the reverse manner.
Why should I use eyeshields on the MEIJI LABAX BM widefield stereo microscope?
The eyeshields fit over the eyepieces, to exclude stray light, and to protect the users spectacles.
How does the illumination system work on the MEIJI LABAX BM widefield stereo microscope?
Both BM and BMK series are fitted with a 12V 10W illuminator that is attached to the optical head. The transformer is built into the heavy base, and controlled by an On/Off switch. PLEASE ENSURE that your mains voltage agrees with the voltage indicated on the base of the microscope. The replacement bulb is MA560 6V 1.2A.
What care and maintenance procedures should I follow for my MEIJI LABAX BM widefield stereo microscope?
Your MEIJI LABAX BM microscope is a precision instrument, and with normal care and a minimum of maintenance should serve you for a lifetime. Regular cleaning after use will prevent a build up of dust and other contaminants.
Eyepiece and objective lenses should never be wiped when dry. Remove loose dust using a camel hair brush. Stubborn dirt should be removed by using lens tissue moistened with an approved lens cleaning fluid. Lenses should never be disassembled by anyone other than a qualified and authorized technician.
The finish on the microscope stand is a hard acid resistant epoxy, and is extremely durable. A soft cloth with a household cleaner is all that is necessary to keep it clean.
CLICK HERE TO DOWNLOAD MEIJI LABAX BM (01) PDF DOCUMENT