Free English MANHATTAN 462709 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MANHATTAN 462709 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What safety precautions should be followed when using the MANHATTAN 462709?
The following safety precautions should be observed for the MANHATTAN 462709:
- Avoid potential injuries or property damage.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Be sure that you understand all instructions before you begin assembly. Ensure that you have received all parts according to the component checklist prior to installation.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product is intended for indoor use only.
What are the weight capacities for the different components of the MANHATTAN 462709?
The weight limits for the MANHATTAN 462709 are as follows:
| Component | Maximum Weight Capacity |
| TV-rated | 120 kg (265 lbs.) |
| Shelf-Rated | 5 kg (11 lbs.) |
| Camera-Rated | 5 kg (11 lbs.) |
How often should maintenance be performed on the MANHATTAN 462709?
Check that the bracket is secure and safe to use at regular intervals (at least every three months).
What display sizes and VESA patterns are compatible with the MANHATTAN 462709?
The MANHATTAN 462709 is designed for 60″ to 120″ displays. It supports the following VESA patterns:
- 200×200
- 400×200
- 300×300
- 400×300
- 400×400
- 600×400
- 800×400
- 600×600
- 800×600
- 1000×600
How do I adjust the casters on the MANHATTAN 462709 if they do not touch the ground?
If the caster cannot touch the ground, loosen the lower nut to adjust the caster to the proper position, then tighten the upper nut.
When should the base screws be fully tightened during the assembly of the MANHATTAN 462709?
During the initial assembly steps, screw the screws without fully tightening them. You should tighten the 8 base screws only after assembling the mounting plate.
How do I adjust the height of the display on the MANHATTAN 462709?
Adjust the height with the crank handle, then tighten the screw.
How is the display angle adjusted on the MANHATTAN 462709?
Adjust to the desired angle then tighten the screws, alternating from each screw as you tighten them.
CLICK HERE TO DOWNLOAD MANHATTAN 462709 (01) PDF DOCUMENT