MAKITA DCS401 (01) PDF MANUAL

FREE ENGLISH MAKITA DCS401 (01) PDF USER GUIDE

FREE ENGLISH MAKITA DCS401 (01) PDF USER MANUAL

FREE ENGLISH MAKITA DCS401 (01) PDF OWNER GUIDE

FREE ENGLISH MAKITA DCS401 (01) PDF OWNER MANUAL

FREE ENGLISH MAKITA DCS401 (01) PDF REFERENCE GUIDE

FREE ENGLISH MAKITA DCS401 (01) PDF INSTRUCTION GUIDE

FREE ENGLISH MAKITA DCS401 (01) PDF REFERENCE MANUAL

FREE ENGLISH MAKITA DCS401 (01) PDF INSTRUCTION MANUAL

FREE ENGLISH MAKITA DCS401 (01) PDF OPERATING INSTRUCTIONS

CLICK HERE TO DOWNLOAD MAKITA DCS401 (01) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

What guide bar and saw chain combinations meet kickback requirements for use in the USA for models DCS340, DCS341, DCS400, DCS401?

The following combinations meet the requirements of ANSI B 175.1 for use in the USA:

Length	Pitch	Gauge	GUIDE BAR part no.	SAW CHAIN part no.
12″ / 30 cm	3/8″	.050″	442 030 661	528 092 646
14″ / 35 cm	3/8″	.050″	442 035 661	528 092 652
16″ / 40 cm	3/8″	.050″	442 040 661	528 092 656

What guide bar and saw chain combinations meet kickback requirements for use in CANADA for models DCS340, DCS341, DCS400, DCS401?

The following combinations meet the requirements of CSA Z62.3 for use in CANADA:

Length	Pitch	Gauge	GUIDE BAR part no.	SAW CHAIN part no.
12″ / 30 cm	3/8″	.050″	442 030 661	528 092 646
14″ / 35 cm	3/8″	.050″	442 035 661	528 092 652
16″ / 40 cm	3/8″	.050″	442 040 661	528 092 656

What are the available spare parts for guide bars, saw chains, and tools?

The following spare parts are available:

Ref No.	Part No.	Description	Specification	Notes
300	442 030 661	Sprocket nose bar	3/8″ .050″ 30cm-12″
300	442 035 661	Sprocket nose bar	3/8″ .050″ 35cm-14″	Applies to specific models
300	442 040 661	Sprocket nose bar	3/8″ .050″ 40cm-16″	Applies to specific models
301	442 030 061	Sprocket nose bar	3/8″ .050″ 30cm-12″	ACC. QuickSet
301	442 035 061	Sprocket nose bar	3/8″ .050″ 35cm-14″	ACC. QuickSet
301	442 040 061	Sprocket nose bar	3/8″ .050″ 40cm-16″	ACC. QuickSet
302	528 092 646	Saw chain	3/8″ .050″ 30cm-12″
302	528 092 652	Saw chain	3/8″ .050″ 35cm-14″
302	528 092 656	Saw chain	3/8″ .050″ 40cm-16″
302	528 091 052	Saw chain	3/8″ .050″ 35cm-14″	Applies to specific models
302	528 091 056	Saw chain	3/8″ .050″ 40cm-16″	Applies to specific models
303	558 092 010	Tie strap with rivets	3/8″ .050″
304	558 092 000	Safety tie strap	3/8″ .050″
306	444 033 141	Sprocket nose bar	.325″ .050″ 33cm-13″	TI 7/00
306	444 038 141	Sprocket nose bar	.325″ .050″ 38cm-15″	TI 7/00
307	532 484 056	SAW CHAIN	.325″ .050″ 33cm-13″	TI 7/00
307	532 484 064	SAW CHAIN	.325″ .050″ 38cm-15″	TI 7/00
308	510 084 020	TIE STRAP WITH RIVETS	.325″ .050″
309	510 084 040	TIE STRAP	.325″ .050″
310	952 100 633	Chain protection cover	30-40cm, 12″-16″
311	941 716 131	Universal wrench	13/16 mm
312	940 827 000	Angled screw driver	T27

*ACC. indicates Accessory. TI indicates Technical Information reference.*

How can I interpret the symbols used in the spare parts list?

Here is a key to the symbols used:

=> 1999999: Production up to serial number 1999999.
2000000 =>: New part starting from serial number 2000000.
2003.04 =>: New part starting from Year 2003 / Month 04.
TI 2003/07: Refer to Technical Information document from Year 2003 / Number 07.
Acc.: Accessories (these are not included in the standard delivery).
=: Indicates no standard execution for this model, but the part may be used.
{: Indicates the item contains the part numbers listed within the bracket.
m: Sold by the meter.
Corr.: Correction to a previous printing error.

Please note that specifications are subject to change without notice.

What are the spare parts for the cylinder and crankcase assembly?

The following spare parts are available for the cylinder and crankcase assembly:

Ref No.	Part No.	Description	Specification	Notes
1	021 131 110	Cylinder	Ø 37mm	Applies to specific models
1	021 131 160	Cylinder	Ø 37mm	Applies to specific models
1	028 131 230	Cylinder	Ø 40mm	Applies to specific models
1	028 131 160	Cylinder	Ø 40mm	Applies to specific models
2	001 151 670	Angular nipple
3	001 131 150	Valve		Decompression
4	965 524 042	Gasket
5	021 132 110	Piston assy.	Ø 37mm	Applies to specific models
5	028 132 110	Piston assy.	Ø 40mm	Applies to specific models
6	021 132 030	Piston ring	Ø 37mm	Applies to specific models
6	021 132 230	Piston ring	Ø 40mm	Applies to specific models
7	021 132 020	Piston pin
8	108 132 050	Spring ring		Qty 2
9	957 120 028	Crankshaft cpl.		TI 12/95
10	021 123 010	Con-rod cpl.
11	962 640 061	Roller		Qty 12
12	939 615 260	Key
13	108 121 010	Stop disc		Qty 2
14	920 108 044	Hexagonal nut left thread	M8x1 L	TI 12/95
15	028 111 640	Crankcase m. side cpl. blue		Magneto side, applies to specific models
16	028 111 030	Crankcase cl. side cpl. red		Clutch side, applies to specific models
16	028 111 630	Crankcase cl. side cpl. blue		Clutch side, applies to specific models
16	028 111 100	Crankcase cl. side black		Clutch side, applies to specific models
17	965 404 220	Valve		Rubber, applies to specific models
18	965 524 011	Gasket
19	962 300 011	Needle cage	13x19x12
20	962 300 011	Needle cage	13x19x12
21	929 319 101	Snap ring
22	929 319 101	Snap ring		Applies to specific models
23	962 900 049	Radial ring
24	962 900 049	Radial ring
25	936 430 160	Clamping pin	3X16	Qty 2
26	021 245 070	Guide pin
27	905 808 254	Bolt	M8x25	Qty varies by model
28	010 245 010	Air valve cpl.
29	965 403 491	Rubber buffer
30	965 403 491	Rubber buffer
31	965 403 491	Rubber buffer
32	908 405 255	Screw	M5x25	Qty 4
33	908 005 305	Screw	M5x30	Qty 6
34	389 213 080	Tensioning screw
35	001 213 042	Nut with pivot
36	965 450 040	Oil tank cap assy.
37	963 100 041	Gasket
38	957 250 015	Spike bar assy.		Qty varies by model
39	908 105 124	Screw	M5x12	Qty varies by model (usually 2)
172	028 111 090	Crankcase m. side black		Magneto side, applies to specific models
172	028 111 060	Crankcase m. side cpl. red		Magneto side, applies to specific models
172	028 111 660	Crankcase m. side cpl. blue		Magneto side, applies to specific models

What are the spare parts for the ignition electronics and starter assembly?

The following spare parts are available for the ignition electronics and starter assembly:

Ref No.	Part No.	Description	Specification	Notes
40	028 142 021	Ignition electronic assy.
41	028 147 000	Short-circuit cable
42	970 310 200	Ignition cable	300 mm	Sold by meter (m)
43	970 502 110	Insulating hose	100 mm	Sold by meter (m)
44	908 605 145	Screw	M5x14	Qty 2
45	957 604 260	Plug cap cpl.
46	965 604 180	Spring		Applies to specific models
47	965 603 018	Spark plug
48	021 141 011	Flywheel		Applies to specific models
49	926 208 001	Spring washer	B8 DIN137	Applies to specific models
50	920 308 024	Hexagonal nut	M8x1	Applies to specific models
51	021 166 040	Snap ring		Applies to specific models
52	021 160 000	Starter assy.		Applies to specific models
53	965 404 031	Starter knob		Applies to specific models
54	021 164 010	Starter rope	Ø 3 x 900mm	Applies to specific models
55	985 000 150	Starter rope	Ø 3 x 100 m	Applies to specific models
56	028 166 030	Starter ratchet/spring
57	900 004 375	Disc
58	028 112 030	Fan housing red		Applies to specific models
58	028 112 630	Fan housing blue		Applies to specific models
59	908 005 165	Screw	M5x16	Qty 3

What are the spare parts for the chain brake assembly?

The following spare parts are available for the chain brake assembly:

Ref No.	Part No.	Description	Specification	Notes
60	028 213 615	Hand guard cpl.		Applies to specific models
61	028 213 030	Hand guard cpl.		Applies to specific models
62	028 213 560	Spring
63	980 114 237	Label		Applies to specific models
64	980 114 761	Label		Applies to specific models
66	028 213 600	Chain brake cpl. blue		Applies to specific models
67	028 213 575	Sprocket guard assy. red		Applies to specific models
67	028 213 675	Sprocket guard assy. blue		Applies to specific models
68	923 208 004	Hexagonal nut	M8
69	028 213 501	Brake spring		Applies to specific models
70	028 213 190	Disengaging lever fix.		Applies to specific models
71	980 114 251	Label	MAKITA	Applies to specific models
71	980 114 744	Label	MDE 336	Applies to specific models
71	980 114 783	Label	MDE 400	Applies to specific models
72	980 114 752	Label		Applies to specific models

What are the spare parts for the muffler, oil pump, and clutch assembly?

The following spare parts are available for the muffler, oil pump, and clutch assembly:

Ref No.	Part No.	Description	Specification	Notes
80	021 174 301	Muffler		Applies to specific models
80	021 174 361	Muffler black		Applies to specific models
81	021 174 321	Muffler		USA, CDN, AUS, NZ models
82	915 135 100	Screw	3.5×9.5	USA, CDN, AUS, NZ models
83	021 174 340	Spark arrester screen		USA, CDN, AUS, NZ models
84	021 174 111	Heat shield		USA, CDN, AUS, NZ models
85	965 524 062	Gasket
86	928 405 000	Disc		Qty 2
87	908 205 605	Screw	M5x60	Qty 2
88	021 245 003	Oil pump cpl.		Applies to specific models
89	028 245 272	Oil pump cpl.		Applies to specific models
90	957 245 270	Repair kit		Oil pump parts, applies to specific models
91	965 451 962	Suction line assy. for oil		Applies to specific models
92	021 245 040	Worm		Applies to specific models
93	021 245 080	Sealing cap
94	021 111 037	Guide plate		Applies to specific models
95	021 224 010	Shim	10x16x0.5
96	028 223 313	Clutch drum	3/8″	Applies to specific models
96	205 223 101	Clutch drum cpl.	.325″	Applies to specific models
97	021 180 011	Clutch assy.		Applies to specific models
98	028 184 020	Flat spring		Qty 2, applies to specific models
99	028 180 031	Clutch assy.		Lamellar clutch, applies to specific models, TI 3/00

What are the spare parts for the cylinder cover assembly?

The following spare parts are available for the cylinder cover assembly:

Ref No.	Part No.	Description	Specification	Notes
100	028 118 480	Cover assy. black		Applies to specific models
100	028 118 520	Cover assy. black	USA, CDN	Applies to specific models
101	028 118 490	Cover assy. black	Start&Go	Applies to specific models
101	028 118 530	Cover assy. grey		Applies to specific models
102	001 118 062	Nut	M5	Qty 2
103	028 118 180	Insert red		Applies to specific models
103	028 118 040	Insert black		Applies to specific models
104	028 173 041	Air filter	Nylon
105	028 173 141	Air filter	Robkoflok	Qty varies by model
106	028 118 310	Hood black		Applies to specific models
106	028 118 430	Hood grey		Applies to specific models
107	028 118 150	Hood black	HappyStart	Applies to specific models
108	908 205 605	Screw	M5x60
109	908 005 165	Screw	M5x16
110	980 114 625	Label	Start&Go	Applies to specific models
111	028 118 030	Adjusting guide		2004 =>

What are the spare parts for the bottom assembly (including fuel system components)?

The following spare parts are available for the bottom assembly:

Ref No.	Part No.	Description	Specification	Notes
142	028 118 271	Bottom		Applies to specific models
143	028 118 380	Bottom	Start&Go	Applies to specific models
144	908 005 165	Screw	M5x16	Qty varies by model
145	908 005 305	Screw	M5x30	Qty 2
146	900 205 554	Screw	M5x55	Qty 2
147	965 524 120	Gasket
148	920 205 000	Hexagon nut	M5	Qty 2
149	965 524 082	Gasket
150	028 131 063	Intermediate flange
151	965 524 131	Gasket
152	965 524 092	Gasket
153	028 118 160	Plate
154	028 118 112	Contact plate		Applies to specific models
155	965 404 421	Gasket		Applies to specific models
156	028 118 121	Stop switch		Applies to specific models
157	028 150 740	Choke lever		Applies to specific models
158	028 117 011	Switch		Multifunction, applies to specific models
159	028 150 750	Choke linkage		Applies to specific models
160	028 155 010	Switch linkage		Applies to specific models
161	028 155 020	Spring		Return spring, applies to specific models
162	965 404 430	Gasket		Applies to specific models
163	965 401 011	Rubber bushing		Applies to specific models
164	010 155 010	Primer		Fuel pump, applies to specific models
165	028 118 410	Primer retaining clip		Applies to specific models
166	028 118 360	Primer retaining clip		Applies to specific models
167	965 404 530	Fuel line		Formed hose, applies to specific models
168	965 452 060	Fuel line	72 mm	Sold by meter (m)
169	965 452 060	Fuel line	118 mm	Sold by meter (m)
170	965 452 060	Fuel line	87 mm	Sold by meter (m)
171	970 502 110	Insulating hose	48 mm	Sold by meter (m)

What are the spare parts for the fuel tank and tubular grip assembly?

The following spare parts are available for the fuel tank and tubular grip assembly:

Ref No.	Part No.	Description	Specification	Notes
120	028 310 050	Tubular handle
121	913 455 454	Screw	5.5×45
122	913 455 204	Screw	5.5×20
123	028 114 191	Tank assy. red		Applies to specific models
123	028 114 691	Tank assy. blue		Applies to specific models
124	028 114 710	Tank assy. blue	Start&Go	Applies to specific models
124	028 114 020	Tank assy. black		Applies to specific models
125	965 404 661	Fuel line
126	937 130 120	Rivet		Applies to specific models
127	957 114 010	Vent valve assy.		Applies to specific models
128	957 114 030	Tank vent assy.		Applies to specific models
129	028 114 730	Plug blue		Applies to specific models
129	028 114 030	Plug black		Applies to specific models
130	028 117 245	Throttle linkage		Applies to specific models
131	010 114 050	Tank cap assy. (fuel)		Applies to specific models
132	963 228 030	Packing ring	Ø 28×3	O-Ring
133	963 601 120	Suction head		Fuel filter
134	980 003 583	Cable strap
135	965 403 491	Rubber buffer		Amortisseur
136	021 114 051	Fixing bush
137	021 114 051	Fixing bush
138	021 114 051	Fixing bush
139	908 005 305	Screw	M5x30
140	913 455 304	Screw	5.5×30
141	913 455 304	Screw	5.5×30

What are the spare parts for the standard carburetor assembly (non-Start&Go)?

The following spare parts are available for the standard carburetor assembly (types WT-174, WT-174 EU, WT466 USA, WT 506):

Ref No.	Part No.	Description	Specification	Notes
200	957 151 700	Carburetor cpl.	WT-174	Applies to specific models, => 2004
201	028 151 702	Carburetor cpl.	WT-174 EU	Applies to specific models, 2004 =>
202	028 151 711	Carburetor cpl.	WT466 USA	Applies to specific models
203	028 151 271	Carburetor cpl.	WT 506	Applies to specific models (Primer)
204	001 151 170	Pump cover		Applies to specific models (Primer)
204	001 151 140	Pump cover		Applies to standard models
205	021 151 240	Adjusting screw	S	Idle stop
206	021 151 230	Pressure spring	S	Idle stop
207	118 151 190	Screw
208	021 151 540	Set gaskets/diaphragm
209	021 151 120	Diaphragm cover
210	118 151 020	Set screw		Qty 4
211	001 151 690	Throttle shaft	USA, ROK, J	Applies to USA/specific models
211	001 151 320	Throttle shaft		Applies to EU/other models
213	001 151 700	Spring	USA, ROK, J	Applies to USA/specific models
213	001 151 310	Spring		Applies to EU/other models
215	108 151 320	Throttle shutter
216	118 151 060	Screw
217	108 151 350	Shaft clip		Applies to specific models
218	119 151 350	Shaft clip		Applies to specific models (Primer)
219	118 151 020	Set screw		Applies to specific models (Primer)
220	001 151 255	Choke shaft
221	001 151 350	Choke shutter
222	118 151 060	Screw
223	118 151 170	Locking ball
224	118 151 160	Locking spring
225	001 151 515	Main adjustm. screw	H	=> 2004
226	021 151 530	Spring	H	=> 2004
227	021 151 470	Idling adjustm. screw	L	=> 2004
228	021 151 480	Feder	L	=> 2004 (Spring)
229	021 151 180	Screen		Strainer
230	957 150 040	Set of control parts

What are the spare parts for the Start&Go carburetor assembly (HU-115 B)?

The following spare parts are available for the Start&Go carburetor assembly (type HU-115 B):

Ref No.	Part No.	Description	Specification	Notes
250	028 150 011	Carburetor cpl.	HU-115 B	Applies to specific models
251	020 150 160	Pump cover		Applies to specific models
252	020 150 170	Screw		Qty 4
253	104 150 120	Diaphragm cover		Applies to specific models
254	001 150 520	Screw		Qty 4
255	001 150 700	Set gasket / diaphragm		Membrane kit HU Rubber
256	100 150 150	Pump diaphr. rubber
257	001 150 640	Pump diaphr. mylar		Qty varies by model
258	001 150 410	Throttle shaft
259	957 150 180	Spring cpl.
260	001 150 321	Throttle shutter
261	001 150 650	Screw
262	028 155 040	Lever		Throttle lever
263	001 150 430	Slotted pin
264	001 150 691	Injection valve cpl.
265	028 155 031	Lever blue
266	113 150 220	Screw
267	020 150 520	Main adjustm. screw	H
268	020 150 470	Idling adjustm. screw	L
269	020 150 240	Idle stop screw	S
270	001 150 480	Spring		Qty 2
271	957 150 171	Set of control parts
272	020 150 420	Main nozzle
273	020 150 200	Screen		Strainer
274	100 150 040	Cover disc