FREE ENGLISH MAKITA CL107FD (01) PDF USER GUIDE
FREE ENGLISH MAKITA CL107FD (01) PDF USER MANUAL
FREE ENGLISH MAKITA CL107FD (01) PDF OWNER GUIDE
FREE ENGLISH MAKITA CL107FD (01) PDF OWNER MANUAL
FREE ENGLISH MAKITA CL107FD (01) PDF REFERENCE GUIDE
FREE ENGLISH MAKITA CL107FD (01) PDF INSTRUCTION GUIDE
FREE ENGLISH MAKITA CL107FD (01) PDF REFERENCE MANUAL
FREE ENGLISH MAKITA CL107FD (01) PDF INSTRUCTION MANUAL
FREE ENGLISH MAKITA CL107FD (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD MAKITA CL107FD (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
MAKITA CL107FD (01) PDF SUMMARY:
How can a child safely use the cordless cleaner?
This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning its safe use and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be done by children without supervision.
What is the intended use of this cordless cleaner?
The tool is intended for collecting dry dust.
What should I do before using the cordless cleaner for the first time?
Read the instruction manual carefully before use.
What types of materials should I avoid picking up with this cleaner?
Do not pick up hot materials such as lit cigarettes or spark/metal dust generated by grinding/cutting metal, flammable materials such as gasoline, thinner, benzine, kerosene, or paint, explosive materials like nitroglycerin, ignitable materials such as aluminum, zinc, magnesium, titanium, phosphorus, or celluloid, wet dirt, water, oil, or the like, hard pieces with sharp edges such as wood chips, metals, stones, glasses, nails, pins, or razors, powder to clot such as cement or toner, conductive dust such as metal or carbon, or fine particles like concrete dust. Picking up these materials may cause fire, injury, and/or property damage.
What precautions should I take when using the cordless cleaner near children?
Close attention is necessary when the cleaner is used by or near children. Do not allow it to be used as a toy.
What should I do if the appliance is not working correctly or has been damaged?
If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
Should I use the cleaner with wet hands?
No, do not handle the appliance with wet hands.
What should I do to ensure proper airflow while using the cleaner?
Do not put any object into the openings. Do not use the cleaner with any opening blocked; keep it free of dust, lint, hair, and anything that may reduce air flow.
What safety measures should I take regarding my body and the cleaner’s openings?
Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
What should I do before removing the battery?
Turn off all controls before removing the battery.
Can I use the cleaner to pick up flammable or combustible liquids?
No, do not use the cleaner to pick up flammable or combustible liquids, such as gasoline, or use it in areas where they may be present.
What type of charger should I use to recharge the battery?
Use only the charger supplied by the manufacturer to recharge. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Can I use the cleaner to pick up burning or smoking materials?
No, do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
Is it safe to use the cleaner without the dust bag and/or filters?
No, do not use the cleaner without the dust bag and/or filters in place.
Where should I charge the battery?
Do not charge the battery outdoors.
What type of battery packs are compatible with this power tool?
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
How should I store the battery pack when not in use?
When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another.
What should I do if liquid leaks from the battery?
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water.
What should I do if I notice anything abnormal during operation?
Stop operation immediately if you notice anything abnormal.
What should I check if I drop or strike the cleaner?
If you drop or strike the cleaner, check it carefully for cracks or damage before operation.
Where should I avoid placing the cleaner?
Do not bring the cleaner close to stoves or other heat sources.
What should I avoid blocking on the cleaner?
Do not block the intake hole or vent holes.
What should I read before using the battery cartridge?
Before using the battery cartridge, read all instructions and cautionary markings on the battery, charger, and product.
What should I do if the operating time of the battery becomes excessively shorter?
If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns, and even an explosion.
What should I do if electrolyte gets into my eyes?
If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of eyesight.
How should I avoid shorting the battery cartridge?
Do not short the battery cartridge by touching the terminals with any conductive material, avoid storing the battery cartridge in a container with other metal objects such as nails, coins, etc., and do not expose the battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns, and even a breakdown.
Where should I store the tool and battery cartridge?
Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 °C (122 °F).
Should I incinerate the battery cartridge if it is damaged or worn out?
No, do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
What precautions should I take when handling the battery?
Be careful not to drop or strike the battery. Do not use a damaged battery.
What regulations apply to the lithium-ion batteries in this product?
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. For commercial transports, special requirements on packaging and labeling must be observed. Consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging.
How should I dispose of the battery?
Follow your local regulations relating to the disposal of the battery.
What type of batteries should I use with this tool?
Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury, and damage. It will also void the Makita warranty for the Makita tool and charger.
What are some tips for maintaining maximum battery life?
Charge the battery cartridge before it is completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. Charge the battery cartridge with room temperature at 10 °C – 40 °C (50 °F – 104 °F). Let a hot battery cartridge cool down before charging it.
What should I ensure before adjusting or checking any function on the tool?
Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking any function on the tool.
What precaution should I take when loading the battery?
Take care not to trap finger(s) between the cleaner and battery as shown in the diagram when loading the battery. Trapping finger(s) may cause injury.
How do I remove the battery cartridge?
To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge.
How do I install the battery cartridge?
To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator on the upper side of the button, it is not locked completely. Insert it fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you.
What should I do if the battery cartridge does not slide in easily?
Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly.
What is the battery protection system and how does it work?
The tool is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. The tool will automatically stop during operation if the tool and/or battery are placed under the following conditions: Overloaded: The tool is operated in a manner that causes it to draw an abnormally high current. In this situation, turn the tool off and stop the application that caused the tool to become overloaded. Then turn the tool on to restart. Low battery voltage: The remaining battery capacity is too low and the tool will not operate. If you turn the tool on, the motor runs again but stops soon. In this situation, remove and recharge the battery.
How can I check the remaining battery capacity?
Only for battery cartridges with the indicator, press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lamps light up for a few seconds. The indicator lamps show the remaining capacity as follows:
| Indicator lamps | Remaining capacity |
|---|---|
| Lighted | 75% to 100% |
| Lighted, Off | 50% to 75% |
| Lighted, Off, Off | 25% to 50% |
| Lighted, Off, Off, Off | 0% to 25% |
Note that depending on the usage conditions and the ambient temperature, the indication may differ slightly from the actual capacity.
How do I turn the cleaner on and change the speed?
To start the cleaner, simply push the ON/speed change button. You can change the cleaner speed in three steps by pushing the ON/speed change button. The first push on this button is for high-speed mode, the second push for max speed mode, and the third push for normal speed. Each push on this button repeats the high/max/normal speed cycle alternatively.
How do I turn the cleaner off?
To switch off, push the OFF button.
How do I turn the lamp on and off?
To turn on the lamp, push the ON/speed change button. Push the OFF button to turn off the lamp. During the tool actuating, the lamp turns on.
What does it mean when the lamp starts blinking?
When the remaining battery capacity gets low, the lamp starts blinking. The timing at which the lamp starts blinking depends on the temperature at the workplace and the battery cartridge conditions.
What should I do before working on the tool?
Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool.
When should I empty the cleaner?
Empty the cleaner before it becomes too full, or the suction force weakens. Be sure to empty the inside of the cleaner itself of dust. Failure to do so may cause the filter to be clogged or the motor to be damaged.
Should I throw away the dust stopper?
Never throw away the dust stopper because it should be used whenever either the dust bag or the paper filter is used.
What should I be careful of when closing the front cover?
When closing the front cover, be careful not to pinch your fingers.
How do I open the front cover to empty the dust?
Push the button to open the front cover. Opening it until a click is heard allows a positive stop at that position.
How do I remove the dust bag and dust stopper?
Pull out both the orange-colored dust stopper and dust bag together at the same time.
How do I empty the cleaner when using a dust bag?
Remove the dust stopper and empty the cleaner.
What should I do if the front cover comes off?
The cleaner is constructed so that the front cover comes off when trying to force it open at an angle of more than 90°. If the front cover comes off, insert it into the front cover joint.
What types of dust collection methods can I use with this cleaner?
You can install either a dust bag or a paper filter before using the cleaner.
Do I need to use the dust stopper with both dust bags and paper filters?
Yes, use the dust stopper when installing either a dust bag or a paper filter.
Can I reuse dust bags?
Yes, dust bags are usable many times repeatedly by cleaning them out.
Are paper filters reusable?
No, paper filters are a throw-away type. Throw away the entire paper filter without emptying it when it has become full.
What should I make sure of before using the cleaner with a dust bag or paper filter?
Make sure that the dust bag or paper filter is installed before use. Insert the dust stopper together with the dust bag or paper filter all the way into the slots when installing them.
What should I do if the dust bag is broken or ripped?
Do not use a broken or ripped bag. Otherwise, the motor may be broken.
What should I avoid doing with the paper filter when installing it?
Do not fold the cardboard at its opening when installing the paper filter.
Why is it important to use genuine paper filters?
The paper filter for the cleaner is an important component for maintaining the tool performance. Using other than the genuine paper filter may cause smoke or ignition.
How do I install a dust bag?
Use the dust stopper when installing the dust bag. Be careful not to mistake the upper side for the lower side because they are different. Insert the protrusion of the dust bag into the groove in the dust stopper. There is no distinction between the upper and lower sides of the dust bag; you may insert its protrusion on either side into the lower groove of the dust stopper. Overlap the frame of the dust stopper with that of the dust bag. Place the dust stopper and the dust bag together into the cleaner cavity in the same direction as the arrow on the dust stopper. Insert them all the way into the slots in the cleaner cavity. Place the entire cloth part of the dust bag inside the cleaner itself. Close the front cover completely.
How do I install a paper filter?
Use the dust stopper also when installing a paper filter. Be careful not to mistake the upper side for the lower side because they are different. Unfold the entrance of the paper filter before setting it on the dust stopper. Insert the protrusion of the paper filter into the groove in the dust stopper. There is no distinction between the upper and lower sides of the paper filter; you may insert its protrusion on any side into the lower groove of the dust stopper. Overlap the frame of the dust stopper with that of the paper filter. Place the dust stopper and the paper filter together into the cleaner cavity in the same direction as the arrow on the dust stopper. Insert them all the way into the slots in the cleaner cavity. Place the entire container part of the paper filter inside the tool itself. Close the front cover completely.
How do I connect attachments like a nozzle?
To connect attachments, such as a nozzle, twist and insert the attachment securely.
How do I disconnect attachments?
To disconnect the attachments, twist and extract them.
How do I use the nozzle?
Attach the nozzle to clean off tables, desks, furniture, etc. The nozzle slips on easily.
How do I use the nozzle with the extension wand (straight pipe)?
The extension wand fits in between the nozzle and the cleaner itself. This arrangement is convenient for cleaning a floor in a standing position.
How do I use the corner nozzle?
Fit on the corner nozzle for cleaning corners and crevices of a car or furniture.
How do I use the corner nozzle with the extension wand (straight pipe)?
In tight quarters where the cleaner itself cannot squeeze in, or in high places hard to reach, use the corner nozzle with the extension wand.
Can I use the cleaner without a nozzle?
Yes, you can pick up powder and dust without a nozzle.
What should I ensure before performing inspection or maintenance?
Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.
What cleaning agents should I avoid using on the cleaner?
Never use gasoline, benzine, thinner, alcohol, or the like. Discoloration, deformation, or cracks may result.
What should I be careful of when placing the cleaner against a wall?
Putting the cleaner against the wall without any other support may cause the cleaner to fall down and be damaged.
How do I clean the exterior of the cleaner?
From time to time, wipe off the outside (cleaner body) of the cleaner using a cloth dampened in soapy water. Clean out also the suction opening, dust bag/paper filter mounting area, and the dust stopper.
How do I clean the filter?
Wash the filter in soapy water when it is clogged with dust and the cleaner power becomes weak. Dry it out thoroughly before use. An insufficiently dried filter may cause poor suction and shorten the service life of the motor.
How do I clean the sponge filter?
When the sponge filter is clogged with dust, remove it from the cleaner and then wipe it off or wash it in water.
How do I remove the sponge filter?
To remove the sponge filter, remove the dust bag or paper filter and then pinch and take it out.
How do I install the sponge filter?
After cleaning the sponge filter, be sure to install it on the cleaner. If washed in water, dry it up before installing. An insufficiently dried sponge filter may shorten the service life of the motor. Press in the whole edge of the sponge filter against the recessed wall inside the dust bag/paper filter mounting area.
What should I check if the suction power is weak?
Check if the dust bag or paper filter is full of dust and empty it if necessary. Check if the dust bag is clogged and dust it down or wash it. Check if the paper filter is clogged and replace it. Check if the battery cartridge is exhausted and charge it if needed.
What should I check if the cleaner is not working?
Check if the battery cartridge is exhausted and charge it if necessary.
Should I attempt to repair the cleaner myself?
No, do not attempt to repair the cleaner by yourself. To maintain product safety and reliability, repairs, any other maintenance, or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
What are some optional accessories available for this cleaner?
Optional accessories include an extension wand (straight pipe), nozzle, nozzle for carpet, shelf brush, corner nozzle, round brush, flexible hose, paper filter, and Makita genuine battery and charger. Note that some items in the list may be included in the tool package as standard accessories and may differ from country to country.
Where can I get assistance for more details regarding accessories?
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
What are the specifications of the CL107FD model?
Model: CL107FD Capacity with a dust bag: 500 mL Capacity with a paper filter: 330 mL Continuous use (with battery BL1015): Normal speed mode: Approx. 25 min High-speed mode: Approx. 12 min Max speed mode: Approx. 10 min Overall length: 960 mm Rated voltage: D.C. 10.8 V Battery cartridge: BL1015, BL1020B, BL1040B Net weight: 1.1 kg (1.3 kg with battery cartridge according to EPTA-Procedure 01/2003) Note that specifications and battery cartridges may differ from country to country, and specifications are subject to change without notice due to ongoing research and development.
CLICK HERE TO DOWNLOAD MAKITA CL107FD (01) PDF MANUAL