MAJORITY P200 PARTY SPEAKER (01) PDF Document

The box contents include:

A. The MAJORITY P200 PARTY SPEAKER

B. Wired Microphone

C. USB Type-C Charging Cable

D. User Manual

To charge the device, insert the USB Type-C cable at the back of the unit into the port labeled DC5V. Connect the other end with a plug (DC5V) to the mains. The charging LED display will light up red to indicate charging. It takes up to 8 hours to process a full charge course. Once fully charged, the red LED light will switch off.

Once fully charged, the speaker can be used on battery power for up to 5 hours. Please note that the playtime may vary based on the volume level and lighting modes usage while playing on battery power.

Insert the wired microphone included in the box into the ‘MIC’ port at the back of the unit. The microphone can be used in all modes: Bluetooth, TF Card, USB, or FM Radio.

Slide the ‘Switch’ button located on the back of the unit to the left or to the right to power on/off your party speaker.

Press and hold the ‘Mode/Lighting’ button for 2-3 seconds to change the lights mode. There are four lighting modes available to choose from which can be used in all modes: BT, FM Radio, USB, or SD.

Press the ‘Mode/Lighting’ button repeatedly to change the speaker modes between Bluetooth, TF Card, USB, or FM Radio.

Press the ‘Previous’ button to skip and play the previous audio track in Bluetooth, TF Card, or USB Playback Mode, or to play the previous FM radio station in FM Radio Mode.

Press the ‘Next’ button to skip and play the next audio track in Bluetooth, TF card, or USB Playback Mode, or to play the next radio station in FM Radio Mode.

To connect two speakers, ensure that both are powered on and not paired individually with other devices via Bluetooth. Press the ‘TWS’ button (the Play/Pause button) twice on one of these speakers, and both will connect wirelessly with each other. A voice-prompted message will then be heard. Once connected, switch on Bluetooth on your phone and search for ‘Majority P200’ to pair. You can now play audio on both party speakers. To disconnect, press the ‘TWS’ button again on one of the speakers.

Press the EQ button to toggle between equalizer sound modes for more bass or treble as per your preferences. There are 6 equalizer modes in total.

Press the ‘MODE’ button at the top of the speaker repeatedly to change the speaker mode to Bluetooth. A voice message will sound the speaker mode. Once in Bluetooth Mode, activate Bluetooth on your device and search your list for ‘Majority P200’. Select the speaker to pair with your device.

Please Note: The speaker cannot be paired with Bluetooth earbuds or earphones.

Press the ‘Mode’ button repeatedly to change to USB Mode. Insert a USB stick (up to 32GB, formatted in FAT32) into the USB playback port. The speaker will automatically start playing audio files (MP3 or WAV). Note that the USB port is for playback only and cannot be used to connect other devices.

Press the ‘MODE’ button repeatedly to change the speaker mode to TF. Insert a TF Card (up to 32GB) into the TF port at the back of the speaker. The speaker will start playing audio files in supported formats (MP3 or WAV).

Press the ‘MODE’ button repeatedly to enter FM Radio Mode. Press and hold the ‘Play/Pause/TWS’ Button for 2-3 seconds to start processing an automatic scan for FM radio stations available at your location. Once the search is completed, the stations will be automatically saved, and the speaker will play the first station found.

If there is no power or function:

1. Check the switch button on the back of the speaker and make sure it is set to ‘ON’.

2. Ensure the speaker battery is fully charged.

If there is no sound:

1. Increase the volume using the rotary knob on the speaker.

2. If you are paired via Bluetooth with another device and there is no sound, increase the volume level from your device, then increase the volume on the speaker.

If Bluetooth is not connecting:

1. Ensure the speaker is not paired with other devices and is set to Bluetooth Mode.

2. Ensure your device has Bluetooth activated. Search for ‘Majority P200’, select, and connect.

1. Read, keep, and follow all instructions and warnings.

2. Do not clean the apparatus near or with water.

3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

5. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

6. Only use accessories specified by the manufacturer.

7. Unplug this apparatus during light storms or when unused for long periods of time.

8. Refer all servicing to qualified service personnel.

9. No naked flame sources, such as a lit candle should be placed on the apparatus.

10. Dispose of used electrical products and batteries safely according to your local authority and regulations.

11. The apparatus shall not be exposed to dripping, splashing or objects filled with water.

12. Battery shall not be exposed to excessive heat.