Free English MAGICSHINE ALLTY 400 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MAGICSHINE ALLTY 400 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How does the battery indicator work on the MAGICSHINE ALLTY 400 when the device is powered on?
When the MAGICSHINE ALLTY 400 device is power-on, the power button light will indicate the battery level. The battery level indications are:
| GREEN | RED | FLASH RED | |
| Battery Level | 100%-21% | 20%-11% | 10%-0% |
How does the battery indicator work on the MAGICSHINE ALLTY 400 when the device is powered off?
When the MAGICSHINE ALLTY 400 device is power-off, short press the power button to activate the indicator light. The indicator light will shut down automatically after 2 seconds. The battery level indications are:
| GREEN | RED | FLASH RED | |
| Battery Level | 100%-21% | 20%-11% | 10%-0% |
How do I charge the MAGICSHINE ALLTY 400 and what do the indicator lights mean?
To charge the MAGICSHINE ALLTY 400:
Charging: The indicator light will FLASH RED.
Fully charged: The indicator light will turn GREEN.
The standard charging time is approximately 2.5 hours (using 5V 1A).
How do I turn the MAGICSHINE ALLTY 400 on or off?
Hold the power button for 1 second to turn the MAGICSHINE ALLTY 400 on or off.
How do I switch the lighting mode on the MAGICSHINE ALLTY 400?
The MAGICSHINE ALLTY 400 has a Mode memory function; when you turn the light on, it lights up in the last lighting mode you used. The switching sequence for Always-on and Flash modes is:
Always-on Modes:
LOW (1x click) -> MID (1x click) -> HIGH (1x click) -> LOW (1x click)
Switching between Always-on and Flash Modes:
From Always-on LOW mode, 2x click to switch to Flash mode.
From Flash mode (any setting), 2x click to switch back to Always-on LOW mode.
Flash Modes:
FLASH 1 (1x click) -> FLASH 2 (1x click) -> FLASH 1 (1x click)
What are the Lumens and Run Time specifications for the MAGICSHINE ALLTY 400?
The Lumens and Run Time for the MAGICSHINE ALLTY 400 are as follows:
| MODE | LOW | MID | HIGH | FLASH 1 | FLASH 2 |
| LUMENS | 100 | 200 | 400 | 0-200 | 0-200 |
| h:min | 06:30 | 03:10 | 01:40 | 07:00 | 05:30 |
What are the ANSI FL 1 Standard specifications for the MAGICSHINE ALLTY 400?
The ANSI FL 1 Standard specifications for the MAGICSHINE ALLTY 400 are:
| LIGHT OUTPUT | BEAM DISTANCE | PEAK BEAM INTENSITY | IMPACT RESISTANCE | WATERPROOF |
| 400 LUMENS | 89m | 1900cd | 1m | 1m |
What items are included in the packaging of the MAGICSHINE ALLTY 400?
The packaging contents for the MAGICSHINE ALLTY 400 include:
ALLTY 400
Handlebar mount
3mm Hex
Gopro mount
Aero bar compatible strap
Type-C USB Cable
CLICK HERE TO DOWNLOAD MAGICSHINE ALLTY 400 (01) PDF DOCUMENT