LYAMBDA LBS201 (01) PDF Document

The LYAMBDA LBS201 package includes:

A: Bluetooth speaker

B: Type-C charging cable

C: User manual

To power on the LYAMBDA LBS201, long press the “Triangle” button for 2 seconds. To power it off, press the “Triangle” button again.

The LYAMBDA LBS201 will enter Bluetooth mode automatically after powering on, and the blue indicator light will flash. On your device, choose “LBS201” from the list of available Bluetooth devices. You will hear a voice prompt once it is connected, and the blue indicator light will stay on. You can then start playing your music. To disconnect the Bluetooth connection, short press the “Light” button 3 times.

Pause/Play: In Bluetooth mode, short press the “Triangle” button to pause the music. Short press it again to resume playback.

Volume Control: Short press the “+” button to increase the volume. When the volume reaches its maximum, you will hear a “dudu” tone. Short press the “-” button to decrease the volume.

Track Control: Long press the “+” button to skip to the next song. Long press the “-” button to go to the previous song.

The LYAMBDA LBS201 supports TWS connection. To use this feature, you will need two LBS201 speakers.

1. With both speakers powered on, short press the “Light” button two times on both speakers to turn on TWS pairing.

2. You will hear a voice prompt for a successful pairing.

3. The sub-master model’s indicator light will keep on, and the master model’s indicator light will flash.

4. Repeat the process to disconnect TWS. When connected, you can enjoy music via various sound channels.

In the power-on state, short press the “Light” button to switch the lighting mode. The sequence is mode 1, mode 2, mode 3, and then mode 4 (off).

When there is an incoming call and your LYAMBDA LBS201 is connected via Bluetooth, the speaker will automatically enter handsfree mode.

Answer/End a call: Short press the “Triangle” button to answer an incoming call. Short press it again to hang up.

Reject a call: Short press the “Triangle” button 2 times to reject an incoming call.

Transfer call audio: During a call, short press the “Triangle” button 2 times to transfer the call audio from the speaker to your phone for privacy.

The LYAMBDA LBS201 supports two sound effect modes: standard balanced sound and outdoor sound (medium and high frequency sound). To switch between the modes, short press the “Triangle” button twice. The default sound mode is standard balanced sound.

Yes, the LYAMBDA LBS201 will automatically shut down after 10 minutes if there is no device connected, to save power.

When you hear the low battery prompt tone, please charge the speaker as soon as possible.

When charging, the red charging indicator light will be on. The indicator light will turn off when the speaker is fully charged.

Important Notes:

Do not use power adapters without safety certification.

It is recommended to use an output 5V/1.5A (or above) adapter to charge.

The status indicator on the LYAMBDA LBS201 shows the following:

Bluetooth search indicator: Blue light flashing

Charging indicator: Red light always on

Low battery indicator: Red light flashing

During music playback, the LED light can be set to Light model 1, Light model 2, Light model 3, or Light model 4 (off).

All common USB 5V chargers can be used, but we suggest using ones that are 5V/2A or above 2A.

The LYAMBDA LBS201 speaker can be normally used within 10 meters under no obstruction environment. If it is beyond 10m or with an obstruction, there might be noise or discontinuous sound.

When there is no Bluetooth pairing for 10 minutes, the speaker will shut down automatically to reduce power consumption.

First, remove the speaker’s paired name from the cellphone’s Bluetooth list and then restart the pairing process.

Please plug in the charger and try again in a few minutes, or try to long press the power button for 10-30 seconds to reset the device.

1. Please read this manual carefully before use and keep it properly.

2. For the first use, please fully charge the product.

3. Please use a certified adapter that has passed national safety certification.

4. If you do not use the product for a long time, be sure to charge it once within a month at least to maintain its performance.

5. Do not use this product in an extremely cold or hot environment, such as temperatures beyond the range of 5°C-35°C. If used beyond the above range, the product may stop automatically to protect the internal circuit.

6. When charging it in a high temperature environment, the product may automatically stop charging to protect the battery. At this time, the charging indicator usually flashes quickly to indicate that the charging environmental temperature or the product internal temperature is too high.

7. Storage environment temperature: -5-35°C RH<70% (recommended 25°C±5).

1. Do not disassemble or repair this speaker personally, otherwise it may cause product damage or personal injury.

2. Do not use it in dusty, humid, dry, and high-temperature environment.

3. Do not place this product near a heat source, or a place with direct sunlight, a lot of dust, or mechanical vibration.

4. In order to reduce the risk of fire, please do not cover this product with newspapers, tablecloths, curtains etc., during use.

5. If the product has a waterproof feature, please do not exceed the nominal parameter range when using it.

6. When the product is damaged such as the power cord or plug is damaged, liquid enters or objects fall into the device, unable to operate normally or falls, it must be repaired.

7. When the product is fully charged, do not connect it to the charger for further long time charging.

8. The maximum ambient temperature should not exceed 40°C.