Free English LOVENSE AMBI (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LOVENSE AMBI (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included with the LOVENSE AMBI?
The LOVENSE AMBI package includes the following items:
(1) Bluetooth Bullet Vibrator
(1) USB Charging Dock
(1) User Manual
(1) Quick Setup Guide
(1) Storage Bag
What are the material specifications for the LOVENSE AMBI?
The LOVENSE AMBI is made of body safe silicone.
What is the weight of the LOVENSE AMBI?
The weight of the LOVENSE AMBI is 59g.
What type of battery does the LOVENSE AMBI use?
The LOVENSE AMBI uses a rechargeable Li Ion battery.
How long does it take to charge the LOVENSE AMBI?
Charging the LOVENSE AMBI takes approximately 80 minutes, or 1.5 hours.
What is the maximum use time for the LOVENSE AMBI?
The LOVENSE AMBI provides up to 120 minutes of use time.
What is the standby time for the LOVENSE AMBI?
The LOVENSE AMBI has a standby time of up to 120 hours.
Is the LOVENSE AMBI waterproof?
Yes, the LOVENSE AMBI is IPX7 waterproof.
How do I turn the LOVENSE AMBI on and off?
To turn the LOVENSE AMBI on or off, hold the button for 3 seconds.
How do I cycle through vibrations on the LOVENSE AMBI?
To cycle through preset vibrations on the LOVENSE AMBI, perform one tap on the button.
What is the procedure for charging the LOVENSE AMBI?
Step 1. Turn off the LOVENSE AMBI.
Step 2. Connect the cable to any USB port or USB/AC power adapter.
Step 3. The device will take approximately 1.5 hours to fully charge.
Step 4. Once fully charged, the solid red light will turn off.
What should I do if the LOVENSE AMBI is not charging?
The magnetic charging dock must be positioned correctly. If a solid red light does not turn on, rotate the LOVENSE AMBI 180 degrees.
How should I clean the LOVENSE AMBI?
Clean the LOVENSE AMBI before and after each use with warm water and a mild soap or sex toy cleaner. Dry it thoroughly before storing.
What type of lubricant should I use with the LOVENSE AMBI?
Only use water based lubricant with the LOVENSE AMBI, as silicone or oil based lubricants may affect the silicone casing.
Can I adjust the vibration levels on the LOVENSE AMBI?
Yes, you can adjust the low, medium, and high vibration levels of the LOVENSE AMBI to suit your needs.
How many custom patterns can I store in the LOVENSE AMBI?
Once in the programming mode in the app, you can store up to 10 patterns you create in the LOVENSE AMBI.
Can I boil the LOVENSE AMBI in water?
No, do not boil the LOVENSE AMBI in water, as the battery may explode or water could leak into the device.
What are the temperature precautions for the LOVENSE AMBI?
Keep the LOVENSE AMBI away from extreme heat or cold.
How often should I recharge the LOVENSE AMBI?
Ensure the LOVENSE AMBI is recharged at least once every six months.
Can I use the LOVENSE AMBI while it is charging?
No, do not use the LOVENSE AMBI while it is charging.
Does the LOVENSE AMBI use Bluetooth?
Yes, the LOVENSE AMBI is a Bluetooth enabled device.
Where are the charging ports located on the LOVENSE AMBI?
The charging ports are located on the top end of the LOVENSE AMBI.
Where is the indicator light located on the LOVENSE AMBI?
The indicator light is located on the top end of the LOVENSE AMBI, between the charging ports and the button.
What is the function of the button on the LOVENSE AMBI?
The button on the LOVENSE AMBI performs two functions: holding it for 3 seconds turns the device on or off, and a single tap cycles through preset vibrations.
How do I verify if the LOVENSE AMBI is charging properly?
A solid red light will turn on when the LOVENSE AMBI is positioned correctly on the magnetic charging dock.
What should I clean the LOVENSE AMBI with if I do not have a specialized cleaner?
If you do not have a sex toy cleaner, you may clean the LOVENSE AMBI with warm water and a mild soap.
Are there any specific storage requirements for the LOVENSE AMBI?
The LOVENSE AMBI should be dried thoroughly before storing it in the provided storage bag.
Is the LOVENSE AMBI casing sensitive to certain types of lubricants?
Yes, silicone or oil based lubricants may affect the silicone casing of the LOVENSE AMBI, which is why only water based lubricants are recommended.
What mode is required to save patterns to the LOVENSE AMBI?
You must be in the programming mode within the application to save patterns to the LOVENSE AMBI.
What happens to the red charging light when the LOVENSE AMBI is fully charged?
When the LOVENSE AMBI is fully charged, the solid red light will turn off.
Does the LOVENSE AMBI have any specific charging dock alignment requirements?
Yes, the magnetic charging dock must be positioned correctly for the LOVENSE AMBI to charge. If it does not work, try rotating the LOVENSE AMBI 180 degrees.
What is the total battery charging time for the LOVENSE AMBI?
It takes approximately 80 minutes to fully charge the LOVENSE AMBI.
Can I use any USB power adapter to charge the LOVENSE AMBI?
Yes, the cable provided with the LOVENSE AMBI can be plugged into any USB port or USB/AC power adapter.
How can I ensure the longevity of the LOVENSE AMBI battery?
To help maintain battery health, ensure that the LOVENSE AMBI is recharged at least once every six months.
Is the LOVENSE AMBI surface safe for body use?
Yes, the LOVENSE AMBI is constructed from body safe silicone.
How should the LOVENSE AMBI be handled before putting it into storage?
The LOVENSE AMBI should be thoroughly dried before being placed into storage to prevent moisture buildup.
Is the button on the LOVENSE AMBI tactile?
The LOVENSE AMBI features a button on the top end that responds to taps and holding, providing control over power and vibration modes.
What does the IPX7 rating signify for the LOVENSE AMBI?
The IPX7 rating means the LOVENSE AMBI is waterproof and can withstand immersion in water.
Is it necessary to turn off the LOVENSE AMBI before charging?
Yes, you should turn off the LOVENSE AMBI before connecting it to the charging source.
How many preset vibration modes does the LOVENSE AMBI have?
The LOVENSE AMBI cycles through its preset vibration patterns when you perform a single tap on the button.
Should the LOVENSE AMBI be cleaned after every use?
Yes, it is recommended to clean the LOVENSE AMBI both before and after every use.
What material is used for the LOVENSE AMBI storage bag?
The LOVENSE AMBI includes a storage bag; however, material specifications for the bag are not listed.
Can I use the LOVENSE AMBI in extreme temperatures?
No, keep the LOVENSE AMBI away from extreme heat or cold to avoid potential damage.
What happens if water enters the LOVENSE AMBI?
If water leaks into the LOVENSE AMBI, it may cause damage to the internal electronics or battery.
What is the approximate charging time for the LOVENSE AMBI?
The LOVENSE AMBI requires approximately 1.5 hours for a full charge.
Is the LOVENSE AMBI suitable for long-term storage without usage?
If stored for long periods, ensure the LOVENSE AMBI is recharged at least once every six months.
How do I verify the LOVENSE AMBI is off?
Hold the button on the LOVENSE AMBI for 3 seconds to ensure it is turned off.
Does the LOVENSE AMBI support app-based control?
Yes, the LOVENSE AMBI can be used in an app to access programming modes and pattern storage.
How many custom patterns can be saved to the LOVENSE AMBI memory?
You can store up to 10 user-created patterns on the LOVENSE AMBI.
What components are provided to charge the LOVENSE AMBI?
The LOVENSE AMBI includes a USB Charging Dock for its charging needs.
CLICK HERE TO DOWNLOAD LOVENSE AMBI (01) PDF DOCUMENT