LITEMONS C30R (01) PDF DOCUMENT

Please adhere to the following danger warnings when using the LITEMONS C30R:

• The LITEMONS C30R is a professional lighting fixture and is prohibited for children. When children are near, parents or guardians must supervise closely to prevent personal injury due to collision with the light or private use of the light.

• This product is not an ordinary lighting fixture and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product. When the light is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If it causes eye discomfort, turn off the light, suspend use, and seek medical attention promptly.

• When the light is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.

• Do not use a damaged product. Stop using immediately if the product shell is cracked due to falling, squeezing, or strong impact, to avoid touching the internal electronic components and getting an electric shock.

• Do not disassemble the product without permission. If the product malfunctions, it must be checked and repaired by authorized maintenance personnel. If the lamp bead is damaged or deformed by heat, stop using it, and contact the manufacturer, service agent, or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.

• Do not use and store this product in explosive atmospheres (near flammable volatile solvents such as alcohol, gasoline, or gases such as methane and ethane).

• Maintain at least a 1-meter distance between the light head and the user, other people, and heat-sensitive or flammable items during and after the operation of the product.

Please note the following warnings for the LITEMONS C30R:

• This equipment is not waterproof; please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty, or overheated environments. Do not place any objects on the light or let liquid flow into the light to avoid accidents.

• Do not block or cover the heat dissipation port of the product.

• After use, the product should be completely cooled before packaging.

• The LITEMONS C30R has built-in lithium batteries. Please use a dedicated charger to charge, and use it within the specified voltage and temperature range according to the correct operating instructions.

Please consider the following points before operation:

• All transport protective materials and packages on the product must be removed before use.

• When not in use, please turn off the product and stop the power supply promptly.

• Please make sure to clean the glass of the lamp bead frequently and keep it clean. The glass may explode if it is stained with mosquito bodies or dark-colored organic matter. When cleaning the device, do not use a wet cloth to wipe; please use a dry soft cloth to wipe the device dirt.

• Do not stare at the operating light source.

The main parts of the LITEMONS C30R are:

1. Light Beads

2. 1/4″ Screw Hole

3. USB-C Port

4. Power Switch Button

5. Select Dial (Rotate/Press)

6. Mode Button

7. Display

8. NFC Sensing Area

The LITEMONS C30R package includes the following items:

• Light Body × 1

• Charging Cord × 1

• Magnetic Fresnel Lens MF01 × 1

• Diffusion Dome × 1

• Instruction Manual × 1

The separately sold accessories for the LITEMONS C30R are:

• Collapsible Diffusion Dome Do01

• Magnetic Diffusion MD01

Bracket: The 1/4″ screw hole design allows for quick mounting to an optional bracket by rotating clockwise to lock the screw after alignment.

Magnetic Accessories: Attach the magnetic accessories onto the side of the light beads.

Power on: Press and hold the power switch button, then rotate the select dial after the power-on icon is displayed on the panel to enter the main interface.

Power off: Press and hold the power switch button until the screen lights off.

Charging: Connect the USB-C port on the light body to a power source with the attached charging cord to charge it.

To navigate the settings, press the mode button, then rotate the select dial to choose among the available modes (CCT, HSI, FX) or the menu. Press the select dial to enter the corresponding setting interface. Rotate and press the select dial to adjust the parameters, then press the mode button to return to the previous interface.

Press the mode button to enter mode selection, then rotate and press the select dial to select CCT mode. In this mode, you can adjust the DIM (Brightness), CCT (Color Temperature), and GM (Green/Magenta shift).

• DIM range: 0% – 100%

• CCT range: 1800K – 10000K

• GM range: -50% – +50%

Press the mode button to enter mode selection, then rotate and press the select dial to select HSI mode. In this mode, you can adjust the DIM (Brightness), HUE (Color), and SAT (Saturation).

• DIM range: 0% – 100%

• HUE range: 0° – 360°

• SAT range: 0% – 100%

Press the mode button to enter mode selection, then rotate and press the select dial to select FX mode. Here, you can choose from 14 different lighting effects and adjust their respective parameters.

The LITEMONS C30R features 14 FX modes. The DIM (Brightness) for all effects is adjustable from 0% – 100%. The specific parameters are as follows:

Note: Please rotate the select dial to adjust the parameters, then press and rotate the select dial to the next parameter. Select manual, the effect can be triggered once by pressing the select dial once. After a certain effect is set, press the mode button to return to the 14 effects interface.

Press the mode button to enter mode selection, then rotate and press the select dial to enter the MENU settings. From here you can access various device settings. Press the mode button to return to the previous interface at any time.

In the MENU, select Bluetooth. Press the select dial to enter the Bluetooth interface. Rotate and press the select dial to turn Bluetooth on or off. If you need to reset the Bluetooth connection, rotate the select dial to ‘Reset’ and press it. The MAC code is displayed in the corner for quick check.

In the MENU, select Anti-False Touch. Rotate and press the select dial to choose between ‘On’ and ‘Off’.

• Off: Press and hold the power switch button to enter the main interface.

• On: Press and hold the power switch button, then rotate the select dial to enter the main interface.

In the MENU, select Overheat Protection. You can choose between ‘Reduce Max Power’ and ‘Turn Off’.

• Reduce max power: The brightness is automatically reduced and cannot be increased, but it can be increased manually when the temperature drops.

• Turn off: The brightness is automatically turned off, but it can be resumed when the temperature drops.

In the MENU, select Fan. Press the select dial to enter the fan interface. Rotate and press the select dial to choose among ‘Off’, ‘Auto’, ‘Medium’, and ‘High’.

In the MENU, select Language. Press the select dial to enter the language interface. Rotate and press the select dial to choose between Simplified Chinese and English.

In the MENU, select Upgrade (labeled as Version). Press the select dial to enter the upgrade interface to check for firmware upgrade instructions. The upgrade is performed from the “GODOX Light” app interface after the device is successfully connected to Bluetooth.

To upgrade using the app:

1. Open the “GODOX Light” app.

2. Enter a certain scene and click “+” to add a fixture.

3. Once added, click the menu icon (:) to display more settings.

4. Choose firmware upgrade.

In the MENU, select Factory Reset. Press the select dial to enter the factory reset interface. Choose ‘Yes’. The device will automatically reset and reboot. After rebooting, Simplified Chinese and English options will show on the display for your choice, after which the brightness will turn to 100% automatically.

In the MENU, select Fixture Info. Press the select dial to enter the fixture info interface. This screen will display basic information about the product, such as Model, Certification, Firmware version, and current Temperature.

You can use the NFC function of your smartphone and the NFC chip of the light fixture to quickly add the light to the Godox Light app.

1. Preconditions:

• The Godox Light app is version V3.2.4 or above.

• The Bluetooth function of your smartphone is turned on.

2. Operation Instructions:

• Turn on the Godox Light app and enter the corresponding scene.

• Click [+] to select the [NFC Addition] function.

• Bring the NFC sensing area of your smartphone near the sensing area of the light fixture to scan and add it. Bulk addition is also supported.

Note: Android systems can complete the addition by directly closing the sensing area, while iOS systems need to click the NFC icon on the right top and wait for the pop-up window, then add.

Note: All the data are average values instead of absolute values. All the above tests are based on the condition of 100% brightness.

If the LITEMONS C30R causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.