LG 70UK6570AUB (01) PDF Document

Please adhere to the following safety instructions when using your LG 70UK6570AUB TV:

• Read and keep these instructions.

• Heed all warnings and follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug.

• Protect the power cord from being walked on or pinched.

• Only use attachments/accessories specified by the manufacturer.

• Use only with a specified cart, stand, tripod, bracket, or table. When a cart is used, use caution when moving the combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel.

To prevent fire, electric shock, malfunction, or product deformation, avoid placing the LG 70UK6570AUB TV and/or remote control in the following environments:

• Keep the product away from direct sunlight.

• An area with high humidity, such as a bathroom.

• Near any heat source, such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area exposed to rain or wind.

• Do not expose to dripping or splashing and do not place objects filled with liquids (vases, cups, etc.) on or over the apparatus.

• Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not install in excessively dusty places.

Also, to prevent the spread of fire, keep candles or other items with open flames away from the product at all times.

Ventilation:

• Install your TV where there is proper ventilation. Do not install it in a confined space such as a bookcase.

• Do not install the product on a carpet or cushion.

• Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

Power Cord:

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

If any of the following occur, unplug the product immediately and contact your local customer service:

• The product has been damaged.

• If water or another substance enters the product (like an AC adapter, power cord, or TV).

• If you smell smoke or other odors coming from the TV.

• During lightning storms or when unused for long periods of time.

Additionally:

• Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.

• Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur.

• Use only authorized attachments/accessories approved by LG Electronics.

• Never disassemble the AC adapter or power cord. This may result in fire or electric shock.

When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

• When the TV is turned on for the first time, initialization may take approximately one minute.

• The image shown may differ from your TV.

• The On Screen Display (OSD) may differ slightly from the manual.

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm wide.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types are High-Speed HDMI®/™ cable and High-Speed HDMI®/™ cable with Ethernet (3 m or less).

When moving or lifting the TV, read the following to prevent it from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Use at least two people to move a large TV.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grille area.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• Keep the TV upright; never turn the TV on its side or tilt it towards the left or right.

• Be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage.

• When attaching the stand, place the screen facing down on a cushioned table or flat surface to protect it from scratches.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already in the eye-bolt positions, remove them first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note: Use a platform or cabinet that is strong and large enough to support the TV securely. Brackets, bolts, and ropes are not provided.

• Use an optional wall mount that supports the VESA standard for your TV model.

• Carefully attach the wall mount bracket to the rear of the TV.

• Install the wall mount bracket on a solid wall perpendicular to the floor.

• If attaching to other building materials, please contact qualified personnel.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• When mounting a TV on the wall, make sure not to install it by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist, as this may damage the product and cause it to fall.

Connect an antenna, cable, or cable box to watch TV. An RF cable is optional.

• Make sure not to bend the copper wire of the RF cable.

• Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

• If you need to connect two or more TVs, use a signal splitter.

The DTV Audio Supported Codecs are MPEG and Dolby Digital.

The supported HDMI audio formats on your LG 70UK6570AUB TV are:

• DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz)

• DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz)

• True HD (48 kHz)

• Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz)

• PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

You can operate the TV functions using the single button on the unit.

Basic functions:

• Power On: Press the button.

• Power Off: Press and hold the button.

• Menu Control: Press the button when the TV is on.

• Menu Selection: Press and hold the button to select a menu item.

Adjusting the menu:

When the TV is on, press the button once to open the menu. You can then press the button repeatedly to cycle through the options:

• Power Off Icon: Turns the power off.

• Input Icon: Changes the input source.

• Channel Icon: Scrolls through the saved channels.

• Volume Icon: Adjusts the volume level.

How to register the Magic Remote Control:

To use the Magic Remote, you must first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the BACK and HOME buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Pressing and holding the GUIDE button will let you cancel and re-register the Magic Remote at the same time.

• Check if anything, such as tape, has been placed over the receiver on the TV.

• Check if there is any obstacle between the product and the remote control.

• Replace the batteries with new fresh ones.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated in the settings menu.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

• If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with the TV.

• Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance.

• Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

• This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

• Displaying a still image for a prolonged period may cause image sticking. Avoid displaying a fixed image on the TV screen for an extended length of time.

• Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

The LG 70UK6570AUB TV uses the LGSBWAC72 wireless module with the following specifications:

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Bluetooth

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.

You can connect the USB to Serial converter/RS-232C input jack to an external control device (like a computer or A/V control system) to control the TV’s functions externally. Cable is not provided.

USB to Serial converter with USB Cable (USB Type):

• The LGTV supports a PL2303 chip-based USB to serial converter.

• This can be purchased from computer stores.

RS-232C With RS-232C Cable (DE9 D-Sub 9pin Type):

• You need to purchase an RS-232C (DE9, D-Sub 9pin female-to-female type) cable for the connection between the PC and the TV.

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to (General → About this TV or OPTION) and press OK.

3. Press the Navigation buttons to scroll to SET ID and press OK.

4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.

5. When you are finished, press EXIT.

• Baud rate: 9600 bps (UART)

• Data length: 8 bits

• Parity: None

• Stop bit: 1 bit

• Communication code: ASCII code

• Use a crossed (reverse) cable.

Transmission Format:

[Command1][Command2][ ][Set ID][ ][Data][Cr]

• [Command 1]: First command to control the TV (j, k, m or x).

• [Command 2]: Second command to control the TV.

• [Set ID]: The desired monitor ID number (1 to 99). If set to ‘0’, every connected set can be controlled. It’s indicated as decimal (1-99) on the menu and as Hexadecimal (0x00 to 0x63) in the protocol.

• [Data]: Command data in hexadecimal. Transmit ‘FF’ to read the status of a command.

• [Cr]: Carriage Return (ASCII code ‘0x0D’).

• [ ]: Space (ASCII code ‘0x20’).

OK Acknowledgement:

[Command2][ ][Set ID][ ][OK][Data][x]

The set sends this acknowledgement when it receives normal data. If the data is in read mode, it indicates the present status. If in write mode, it returns the PC’s data.

Error Acknowledgement:

[Command2][ ][Set ID][ ][NG][Data][x]

The set sends this acknowledgement for abnormal data from non-viable functions or communication errors. Data 00 indicates an Illegal Code.

The dimensions and weight of the LG 70UK6570AUB TV vary slightly between different sub-models within the series. Here are the specifications for the 65SK9000PUA and 65SK8550PUA models as a reference:

A: Width, B: Height, C: Stand Width, D: Height without stand, E: Depth, F: Weight with stand, F-G: Weight without stand