LG 65UN8500PUI (02) PDF Document

To ensure proper ventilation, follow these guidelines:

Install your LG 65UN8500PUI where there is proper ventilation. Do not install it in a confined space such as a bookcase.

Do not install the product on a carpet or cushion.

Do not block or cover the product with cloth or other materials while the unit is plugged in.

Do not touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

Read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size:

It is recommended to move the LG 65UN8500PUI in the box or packing material that the TV originally came in.

Before moving or lifting the TV, disconnect the power cord and all cables.

When holding the TV, the screen should face away from you to avoid damage.

Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

Use at least two people to move a large TV.

When transporting the TV by hand, hold the TV as shown in the manual illustrations.

When transporting the TV, do not expose the TV to jolts or excessive vibration.

When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

When handling the TV, be careful not to damage the protruding buttons.

Avoid touching the screen at all times, as this may result in damage to the screen.

Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

1. Lift and tilt the TV into its upright position on a table. Leave a minimum of 10 cm (4 inches) space from the wall for proper ventilation.

2. Connect the power cord to a wall outlet.

Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product.

If you install the TV on a stand, you need to take actions to prevent the product from overturning.

Do not use any unapproved items to ensure the safety and product life span.

Make sure that the screws are fastened tightly. If they are not fastened securely enough, the TV may tilt forward after being installed. Do not fasten the screws with excessive force otherwise they may strip and become loose.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts inserted at the eye-bolts position, remove the bolts first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Use a platform or cabinet that is strong and large enough to support the TV securely.

Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

For the LG 65UN8500PUI (UN85 series), the VESA wall mount specifications are:

VESA (A x B): 300 x 300 mm

Standard screw: M6

Number of screws: 4

Wall mount bracket (optional): OLW480B

Connect an antenna, cable, or cable box to watch TV while referring to the illustrations in the manual. The RF cable is optional.

Make sure not to bend the copper wire of the RF cable.

Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

Use a signal splitter to use 2 TVs or more.

This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed.

You can access this setting by going to [Picture] -> [Additional Settings] -> [HDMI Ultra HD Deep Color].

For the LG 65UN8500PUI (UN85 series), the settings are:

On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0), and for ports 3 and 4 Only: 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)

Off: Support 4K @ 50/60 Hz (4:2:0)

If the device connected to the Input Port also supports Ultra HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Color] setting to off.

You can operate the TV functions using the single button located on the unit.

Power On (Press): Turns the TV on.

Power Off (Press and Hold): Turns the TV off. All running apps will close.

Menu Control (Press): You can access and adjust the menu by pressing the button when the TV is on.

Menu Selection (Press and Hold): You can use the function when you access menu control.

When the TV is turned on, press the button one time to adjust the Menu items:

Power Icon: Turns the power off.

Input Icon: Changes the input source.

+/- Icons: Adjusts the volume level.

Up/Down Icons: Scrolls through the saved channels.

To use the Magic Remote, first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

Press the BACK button and the HOME button at the same time, for five seconds, to unpair the Magic Remote with your TV.

Pressing and holding the GUIDE button for more than 5 seconds will disconnect and re-register the Magic Remote at the same time.

Check the following if you cannot control the TV with the remote:

Check if anything such as tape has been placed over the receiver.

Check if there is any obstacle between the product and the remote control.

Replace the batteries with new fresh ones.

Check if the product is turned on.

Check if the power cord is connected to a wall outlet.

Check if there is a problem in the wall outlet by connecting other products.

Check the power control settings. The power supply may be interrupted.

Check if the auto-off function is activated in the settings menu.

If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

When cleaning, unplug the power cord and wipe gently with a soft/dry cloth.

Do not spray water or other liquids directly on the TV.

Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

Make sure to wring any excess water or cleaner from the cloth.

Do not spray water or cleaner directly onto the TV screen.

Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

Connect the USB to Serial (RS-232C) converter/RS-232C (Serial) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.

The LG 65UN8500PUI supports PL2303 chip-based (Vendor ID: 0x0557, Product ID: 0x2008) USB to serial (RS-232C) converters.

Note that the cable is not provided.

You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual.

For some models, you may need to connect to the USB port instead.