Free English LG 55SL5PE (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LG 55SL5PE (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What items are included with the LG 55SL5PE?
The following items are typically included with your LG 55SL5PE. Please note that the included accessories may vary depending on the country.
• Monitor Signage
• Remote Control
• AAA Batteries
• Software CD
• Power Cord
• RS-232C Cable
• DVI Cable
• IR Receiver
How do I connect external devices to my LG 55SL5PE?
You can connect various external devices to your LG 55SL5PE using the available ports on the back panel.
• HDMI IN 1 / HDMI IN 2: Connect the HDMI output of a PC, set-top box, gaming console, or other external device.
• HDMI OUT: Connect to another display’s HDMI input port.
• DVI-D IN: Connect the DVI output from a PC or external device.
• DVI OUT: Connect to another display’s DVI input port.
• RGB IN: Connect the RGB output from a PC.
• RGB OUT: Connect to another display’s RGB input port.
• AUDIO IN: Connect the audio output from a PC or external device.
• AUDIO OUT: Connect to an external speaker or audio system.
• LAN (Network): Connect to a network for network-based control and content.
• RS-232C IN: Connect to the RS-232C output of a PC for remote control.
• RS-232C OUT: Connect to another display’s RS-232C IN port to daisy-chain monitors.
• USB: Connect a USB storage device.
• EXT IR IN: Connect the external IR receiver.
• IO OUT: For connecting specific I/O devices.
How do I connect the power cord to my LG 55SL5PE?
Follow these steps to safely connect the power cord:
Step 1. First, connect the power cord securely to the power input port on the back of the LG 55SL5PE monitor.
Step 2. Next, plug the other end of the power cord into a grounded wall outlet.
Note: The LG 55SL5PE model features an OPS DC Power port with a rating of 13.2 V – 2.65 A / 2.65 A (13.2 V – 5.3 A).
How do I install the batteries in the remote control for my LG 55SL5PE?
To install the batteries in your remote control, follow these steps:
Step 1. Slide the battery cover off the back of the remote control.
Step 2. Insert two AAA batteries into the compartment. Make sure to match the positive (+) and negative (-) ends of the batteries with the markings inside the compartment.
Step 3. Slide the battery cover back on until it clicks into place.
How do I turn on my LG 55SL5PE?
You can turn on your LG 55SL5PE using one of two methods:
1. Using the button on the monitor: Press the power button located on the bottom of the monitor.
2. Using the remote control: Aim the remote control at the sensor on the monitor and press the power button.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD LG 55SL5PE (02) PDF DOCUMENT