Free English LG 55SL5E (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LG 55SL5E (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What accessories are included with the LG 55SL5E?
The accessories included with your LG 55SL5E may vary depending on the country. The typical items included are:
• Power Cord
• Remote Control
• AAA Batteries
• Software CD
• RS-232C Cable
• RGB Cable
How do I connect external devices to my LG 55SL5E?
You can connect various external devices to your LG 55SL5E using the ports on the back of the monitor:
• HDMI: Connect your PC, laptop, or other HDMI device to the HDMI IN 1 or HDMI IN 2 port.
• DVI-D: Connect your PC or laptop to the DVI-D IN port.
• RGB: Connect your PC or laptop to the RGB IN port.
• Audio In: For devices connected via DVI-D or RGB, connect an audio cable from the device to the AUDIO IN port on the monitor.
• Audio Out: To connect to an external audio system, use the AUDIO OUT port.
• Network (LAN): Connect a network cable to the LAN port for network connectivity.
• USB: Connect a USB device to the USB port (5 V, 1.0 A).
• External IR Sensor: Connect an external infrared sensor to the EXT IR IN port.
• RS-232C: Use the RS-232C IN port to connect a control device. You can use the RS-232C OUT port to connect another monitor in a daisy-chain configuration.
• Daisy-Chaining Displays: You can connect additional monitors by using the DVI OUT or HDMI OUT ports to send the video signal to the next display’s input.
How do I connect the power cord to my LG 55SL5E?
To power your LG 55SL5E, please follow these steps:
1. Securely plug one end of the power cord into the power input jack on the back of the monitor.
2. Plug the other end of the power cord into a grounded wall outlet.
How do I install the batteries in the remote control for the LG 55SL5E?
To install the batteries in the remote control for your LG 55SL5E, follow these four steps:
1. Open the battery cover on the back of the remote by sliding it in the direction of the arrow.
2. Insert two AAA batteries into the compartment. Make sure to match the positive (+) and negative (-) ends of the batteries with the markings inside the compartment.
3. Close the battery cover by sliding it back into place until it clicks.
How do I turn on the LG 55SL5E monitor?
After connecting the power cord, you can turn on your LG 55SL5E using one of two methods:
• Press the power button located on the monitor itself.
• Aim the remote control at the sensor on the monitor and press the power button on the remote.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD LG 55SL5E (02) PDF DOCUMENT