LG 50UN7000PUC (01) PDF Document

When installing the LG 50UN7000PUC, please adhere to the following safety guidelines:

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not place the TV on a carpet or cushion.

Do not block or cover the product with cloth or other materials while the unit is plugged in.

Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon.

Read the following instructions to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size:

It is recommended to move the TV in the box or packing material that the TV originally came in.

Before moving or lifting the TV, disconnect the power cord and all cables.

When holding the TV, the screen should face away from you to avoid damage.

Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

Use at least two people to move a large TV.

When transporting the TV by hand, hold the TV as shown in the illustrations provided in the manual (upright).

When transporting the TV, do not expose the TV to jolts or excessive vibration.

When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

When handling the TV, be careful not to damage the protruding buttons.

Avoid touching the screen at all times, as this may result in damage to the screen.

Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Make sure to use screws and a wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits for the LG 50UN7000PUC are as follows:

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts inserted at the eye-bolts position, remove the bolts first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Use a platform or cabinet that is strong and large enough to support the TV securely.

Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

Connect an antenna, cable, or cable box to the TV while referring to the illustrations in the manual. The RF cable is optional.

Make sure not to bend the copper wire of the RF cable.

Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

Use a signal splitter to use 2 TVs or more.

DTV Audio Supported Codec: MPEG, Dolby Digital.

Navigate to [Settings] > [Picture] > [Additional Settings] > [HDMI Ultra HD Deep Color].

For UN70 series:

On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

Off: Support 4K @ 50/60 Hz (4:2:0)

If the device connected to Input Port also supports Ultra HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Color] setting to off.

You can operate the TV functions using the button located on the TV.

Power On (Press): Turns the TV on.

Power Off (Press and Hold): Turns the TV off. All running apps will close.

Menu Control (Press): You can access and adjust the menu by pressing the button when the TV is on.

Menu Selection (Press and Hold): You can use the function when you access menu control.

When the TV is turned on, press the button one time. You can adjust the Menu items using the button.

Power Icon: Turns the power off.

Input Icon: Changes the input source.

Volume Icon (+ -): Adjusts the volume level.

Channel Icon (^ v): Scrolls through the saved channels.

Depending on the model, the descriptions are as follows:

POWER: Turns the TV on or off.

TV: Returns to the last TV channel.

SEARCH: Check for recommended content.

CC/SUB: Activates or deactivates the subtitles.

Q. Settings (Gear Icon): Accesses the Quick Settings.

INPUT: Changes the input source.

Number buttons: Enters numbers.

9**: Accesses the [Quick Help].

DASH (-): Inserts a dash between numbers such as 2-1 and 2-2.

LIST: Accesses the saved channels list.

MORE ACTIONS (…): Displays more remote control functions.

QUICK ACCESS (0): Edits QUICK ACCESS.

VOL + -: Adjusts the volume level.

FAV: Accesses your favorite channel list.

GUIDE: Displays the program event according to time scheduler.

MUTE: Mutes all sounds. Press and hold to access the [Accessibility] menu.

CH ^ v: Scrolls through the saved channels.

PAGE ^ v: Moves to the previous or next screen.

Streaming Service buttons: Connects to the Video Streaming Service.

HOME: Accesses the Home menu. Press and hold to show previous history.

BACK: Returns to the previous screen.

EXIT: Clears on-screen displays and returns to last input viewing.

Navigation button (up/down/left/right): Scrolls through menus or options.

OK: Selects menus or options and confirms your input.

INFO: Shows information on the current program.

SAP: Enables SAP (Secondary Audio Program) Feature.

REC: Starts to record (Only Time Machine Ready supported model).

Control buttons (Play, Pause, etc): Control buttons for media contents.

Colored buttons: These access special functions in some menus.

To use the Magic Remote, first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

Press the BACK and HOME buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

Pressing and holding the GUIDE button for more than 5 seconds will disconnect and re-register the Magic Remote at the same time.

For more information about this TV, read the USER GUIDE embedded in the product. To open the USER GUIDE, go to [Settings] > [Support] > [User Guide].

Check if anything such as tape has been placed over the receiver.

Check if there is any obstacle between the product and the remote control.

Replace the batteries with new fresh ones.

Check if the product is turned on.

Check if the power cord is connected to a wall outlet.

Check if there is a problem in the wall outlet by connecting other products.

Check the power control settings. The power supply may be interrupted.

Check if the auto-off function is activated in the settings menu.

If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

When cleaning, unplug the power cord and wipe gently with a soft/dry cloth.

Do not spray water or other liquids directly on the TV.

Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel.

Make sure to wring any excess water or cleaner from the cloth.

Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

The following table lists the Key Codes (Hexa) and their corresponding functions: